Storage Administration Guide
Provides information about how to manage storage devices on a SUSE Linux Enterprise Server.
- About This Guide
- I File Systems and Mounting
- II Logical Volumes (LVM)
- 5 LVM Configuration
- 5.1 Understanding the Logical Volume Manager
- 5.2 Creating Volume Groups
- 5.3 Creating Logical Volumes
- 5.4 Automatically Activating Non-Root LVM Volume Groups
- 5.5 Resizing an Existing Volume Group
- 5.6 Resizing a Logical Volume
- 5.7 Deleting a Volume Group or a Logical Volume
- 5.8 Using LVM Commands
- 5.9 Tagging LVM2 Storage Objects
- 6 LVM Volume Snapshots
- 5 LVM Configuration
- III Software RAID
- IV Network Storage
- 13 iSNS for Linux
- 14 Mass Storage over IP Networks: iSCSI
- 15 Fibre Channel Storage over Ethernet Networks: FCoE
- 16 NVMe over Fabric
- 17 Managing Multipath I/O for Devices
- 17.1 Understanding Multipath I/O
- 17.2 Hardware Support
- 17.3 Planning for Multipathing
- 17.4 Multipath Management Tools
- 17.5 Configuring the System for Multipathing
- 17.6 Creating or Modifying the /etc/multipath.conf File
- 17.7 Configuring Default Policies for Polling, Queuing, and Failback
- 17.8 Blacklisting Non-Multipath Devices
- 17.9 Configuring User-Friendly Names or Alias Names
- 17.10 Configuring Path Failover Policies and Priorities
- 17.11 Configuring Multipath I/O for the Root Device
- 17.12 Configuring Multipath I/O for an Existing Software RAID
- 17.13 Using LVM2 on Multipath Devices
- 17.14 Best Practice
- 17.15 Troubleshooting MPIO
- 18 Managing Access Control Lists over NFSv4
- A Licenze GNU
- 1.1 File System Types in Linux
- 1.2 Maximum Sizes of Files and File Systems (On-Disk Format, 4 KiB Block Size)
- 1.3 Storage Limitations
- 2.1 File System Support for Resizing
- 7.1 Comparison of RAID 5 and RAID 6
- 9.1 Nested RAID Levels
- 9.2 Scenario for Creating a RAID 10 (1+0) by Nesting
- 9.3 Scenario for Creating a RAID 10 (0+1) by Nesting
- 9.4 Complex RAID 10 compared to Nested RAID 10
- 9.5 Scenario for Creating a RAID 10 Using mdadm
- 11.1 Tasks Involved in Resizing a RAID
- 11.2 Scenario for Increasing the Size of Component Partitions
- 12.1 Translation between Non-SES-2 Patterns and SES-2 Patterns
- 17.1 Multipath I/O Features of Storage Arrays
- 17.2 Tools in the multipath-tools Package
- 17.3 Group Policy Options for the multipath -p Command
- 17.4 Comparison of Multipath Device Name Types
- 17.5 Group Policy Options for the multipath -p Command
Copyright © 2006– 2022 SUSE LLC e collaboratori. Tutti i diritti riservati.
L'autorizzazione per la copia, la distribuzione e/o la modifica di questo documento è soggetta ai termini indicati nella licenza GFDL (GNU Free Documentation License), versione 1.2 oppure, a scelta, 1.3, di cui la presente licenza e le presenti informazioni sul copyright rappresentano la sezione non variabile. Una copia della licenza versione 1.2 è inclusa nella sezione intitolata “GNU Free Documentation License”.
Per i marchi di fabbrica SUSE vedere http://www.suse.com/company/legal/. Tutti gli altri marchi di fabbrica di terze parti sono proprietà dei rispettivi titolari. I simboli di marchio di fabbrica (®, ™ e così via) indicano i marchi di fabbrica appartenenti a SUSE e alle rispettive affiliate. Gli asterischi (*) indicano i marchi di fabbrica di terze parti.
Tutte le informazioni nella presente pubblicazione sono state compilate con la massima attenzione ai dettagli. Ciò, tuttavia, non garantisce una precisione assoluta. SUSE LLC, le rispettive affiliate, gli autori e i traduttori non potranno essere ritenuti responsabili di eventuali errori o delle relative conseguenze.