Jump to contentJump to page navigation: previous page [access key p]/next page [access key n]

9 Image Types

Note
Note

Before building an image with KIWI NG it’s important to understand the different image types and their meaning. This document provides an overview about the supported KIWI NG image types, their results and some words about the environment to run the build.

ISO Hybrid Live Image

An iso image which can be dumped on a CD/DVD or USB stick and boots off from this media without interfering with other system storage components. A useful pocket system for testing and demo and debugging purposes. For further details refer to Section 10.1, “Build an ISO Hybrid Live Image”

Virtual Disk Image

An image representing the system disk, useful for cloud frameworks like Amazon EC2, Google Compute Engine or Microsoft Azure. For further details refer to Section 10.2, “Build a Virtual Disk Image”

OEM Expandable Disk Image

An image representing an expandable system disk. This means after deployment the system can resize itself to the new disk geometry. The resize operation is configurable as part of the image description and an installation image for CD/DVD, USB stick and Network deployment can be created in addition. For further details refer to: Section 10.3, “Build an Expandable Disk Image”

Docker Container Image

An archive image suitable for the docker container engine. The image can be loaded via the docker load command and works within the scope of the container engine. For further details refer to: Section 10.4, “Build a Container Image”

WSL Container Image

An archive image suitable for the Windows Subsystem For Linux container engine. The image can be loaded From a Windows System that has support for WSL activated. For further details refer to: Section 10.5, “Build a WSL Container Image”

KIS Root File System Image

An optional root filesystem image associated with a kernel and initrd. The use case for this component image type is highly customizable. Many different deployment strategies are possible. For further details refer to: Section 10.6, “Build KIS Image (Kernel, Initrd, System)”

9.1 Image Results

KIWI NG execution results in an appliance image after a successful run of Section 4.6, “kiwi-ng system build” or Section 4.7, “kiwi-ng system create” command. The result is the image binary plus some additional metadata files which are needed for image deployment and/or exists for informative reasons. By default the output files follow this naming convention:

<image-name>.<arch>-<version>.<extension>

where <image-name> is the name stated in the Chapter 8, Image Description as an attribute of the Section 8.1.1, “<image>” element. The <arch> is the CPU architecture used for the build, <version> is the image version defined in Section 8.1.4, “<preferences>” element of the image description and the <extension> is dependent on the image type and its definition.

Any KIWI NG appliance build results in, at least, the following output files:

  1. The image binary, <image-name>.<arch>-<version>.<image-extension>:

    This is the file containig the actual image binary, depending on the image type and its definition it can be a virtual disk image file, an ISO image, a tarball, etc.

  2. The <image-name>.<arch>-<version>.packages file:

    This file includes a sorted list of the packages that are included into the image. In fact this is normalized dump of the package manager database. It follows the following cvs format where each line is represented by:

    <name>|<epoch>|<version>|<release>|<arch>|<disturl>|<license>

    The values represented here are mainly based on RPM packages metadata. Other package managers may not provide all of these values, in such cases the format is the same and the fields that cannot be provided are set as None value. This list can be used to track changes across multiple builds of the same image description over time by diffing the packages installed.

  3. The <image-name>.<arch>-<version>.verified file:

    This file is the output of a verification done by the package manager against the package data base. More specific it is the output of the rpm verification process or dpkg verification depending on the packaging technology selected for the image. In both cases the output follows the RPM verification syntax. This provides an overview of all packages status right before any boot of the image.

Depending on the image type, the following output files exists:

image=”tbz”

For this image type the result is mainly a root tree packed in a tarball:

  • root archive: exc_image_base_name.x86_64-1.15.3.tar.xz

image=”btrfs|ext2|ext3|ext4|squashfs|xfs”

The image root tree data is packed into a filesystem image of the given type, hence the resutl for an ext4 image would be:

  • filesystem image: exc_image_base_name.x86_64-1.15.3.ext4

image=”iso”

The image result is an ISO file:

  • live image: exc_image_base_name.x86_64-1.15.3.iso

image=”oem”

An image representing an expandable disk image. KIWI NG can also produce an installation ISO for this disk image by setting installiso="true" in the Section 8.1.4, “<preferences>”) section or a tarball including the artifacts for a network deployment by setting installiso="true". For further details see Section 10.3, “Build an Expandable Disk Image”. The results for oem can be:

  • disk image: exc_image_base_name.x86_64-1.15.3.raw

  • installation image (optional): exc_image_base_name.x86_64-1.15.3.install.iso

  • installation pxe archive (optional): exc_image_base_name.x86_64-1.15.3.install.tar

The disk image can also be provided in one of the various virtual disk formats which can be specified in format attribute of the Section 8.1.4, “<preferences>” section. For further details see Section 10.2, “Build a Virtual Disk Image”. The result for e.g format="qcow2" would be:

  • disk image: exc_image_base_name.x86_64-1.15.3.qcow2

instead of the raw default disk format.

image=”docker”

An archive image suitable for the docker container engine. The result is a loadable (docker load -i <image>) tarball:

  • container: exc_image_base_name.x86_64-1.15.3.docker.tar.xz

image=”oci”

An archive image that builds a container matching the OCI (Open Container Interface) standard. The result is a tarball matching OCI standards:

  • container: exc_image_base_name.x86_64-1.15.3.oci.tar.xz

image=”appx”

An archive image suitable for the Windows Subsystem For Linux container engine. The result is an appx binary file:

  • container: exc_image_base_name.x86_64-1.15.3.appx

image=”kis”

An optional root filesystem image associated with a kernel and initrd. All three binaries are packed in a tarball, see Section 10.6, “Build KIS Image (Kernel, Initrd, System)” for further details about the kis archive:

  • kis archive: exc_image_base_name.x86_64-1.15.3.tar.xz

9.2 Image Bundle Format

The result files as mentioned above are used in the KIWI NG result bundler. The kiwi-ng result bundle command can be used to copy or package the mandatory image files to create a customer release. In this process it’s possible to apply a specific name pattern suitable for the requirements of the release. A typical result bundle call can look like the following:

$ kiwi-ng result bundle --target-dir /path/to/image/build_result \
      --bundle-dir=/path/to/image/release_result \
      --id=release_identifier

In this call and depending on the image type the required files as they exist in /path/to/image/build_result are copied to /path/to/image/release_result/. The only modification on the file names is the --id information which is appended with a - to at the end of the version substring. If we take exc_image_base_name.x86_64-1.15.3.iso as example. This file would be bundled as exc_image_base_name.x86_64-1.15.3-release_identifier.iso

Depending on the use case and the customer requirements this naming schema and the default way how the kiwi bundler processes the result files is not appropriate. To allow for a more flexible naming schema when bundling results, KIWI NG allows to specify a bundle_format per type like in the following example:

<type image="..." bundle_format="name_pattern">
    <!-- type definition -->
</type>

The specified name_pattern is used as the base name for the image files the bundler uses. As part of the name_pattern the following placeholders which gets replaced by their real value can be used:

%N

Turns into the contents of the name attribute of the <image> section

%P

Turns into the profile name used at build time of the image. If multiple profiles were used to build the image the result name consists out of the individual profile names concatenated by a _ in the order of their specification in the image description and/or the commandline.

%A

Turns into the architecture name at build time of the image. Arch names are taken from Python’s platform.machine information.

%I

Turns into the identifier name given via the --id option at call time of the bundler

%T

Turns into the contents of the image attribute of the <type> section

%M

Turns into the major number of the <version> section

%m

Turns into the minor number of the <version> section

%p

Turns into the patch number of the <version> section

Print this page