This is unreleased documentation for SUSE® Storage 1.13 (Dev).

Configurable CPU Cores

SUSE Storage now supports configurable CPU cores for the V2 Data Engine through the use of a CPU Mask. This mask allows you to define exactly which CPU cores are allocated to the engine, offering both global and per-node configuration options. When you assign CPU cores to the V2 data engine, ensure that the V2 Guaranteed Instance Manager CPU setting reserves at least the same number of CPU cores based on the node’s allocatable CPU capacity.

Understanding the CPU Mask

The CPU mask is a hexadecimal (hex) representation of a binary bitmask, where each bit corresponds to a specific CPU core.

  • A bit set to 1 means the core is enabled for the data engine.

  • A bit set to 0 means the core is skipped.

How to Calculate the Mask

To determine the correct hex string, visualize your CPU cores as a sequence of bits from right to left:

Desired No. of Cores Binary Representation (Cores 3, 2, 1, 0) Hexadecimal Value

1 Core

0001

0x1

2 Cores

0011

0x3

3 Cores

0111

0x7

4 Cores

1111

0xF

Example for 23 Cores: To allocate 23 cores, you need 23 bits set to 1.

  • Binary: 111 1111 1111 1111 1111 1111

  • Hexadecimal: 0x7FFFFF

Do not confuse the number of cores with the hex value. For instance, setting 0x4 (Binary 0100) only enables one core (Core #2), whereas 0xF (Binary 1111) enables four cores.

Global Configuration

To set CPU cores globally across the cluster, update the data-engine-cpu-mask setting.

  1. Navigate to Settings > General.

  2. Locate Data Engine CPU Mask.

  3. Enter your calculated hex string (for example, 0xF).

Per-node Configuration

For node-specific CPU core allocation, update the spec.dataEngineSpec.v2.cpuMask field of the instance manager with a hexadecimal encoded string. By default, this value is empty, and the V2 Data Engine uses the global setting specified by data-engine-cpu-mask. When a per-node configuration is set, the V2 Data Engine prioritizes this value over the global setting for that specific node.

Calculation Tools

You can use a Binary to Hex Converter to help calculate your mask. Type a 1 for every core you wish to allocate and convert the resulting binary string to Hex.