2 Authentication with PAM #

System administrators and programmers often want to restrict access to certain parts of the system or to limit the use of certain functions of an application. Without PAM, applications must be adapted every time a new authentication mechanism, such as LDAP, Samba, or Kerberos, is introduced. However, this process is time-consuming and error-prone. One way to avoid these drawbacks is to separate applications from the authentication mechanism and delegate authentication to centrally managed modules. Whenever a newly required authentication scheme is needed, it is sufficient to adapt or write a suitable PAM module for use by the program in question.

The PAM concept consists of:

PAM can be configured in two ways:

The files under /etc/pam.d/ define the PAM modules used for authentication. Each file consists of lines, which define a service, and each line consists of a maximum of four components:

TYPE  CONTROL
 MODULE_PATH  MODULE_ARGS

The components have the following meaning:

In addition, there are global configuration files for PAM modules under /etc/security, which define the exact behavior of these modules (examples include pam_env.conf and time.conf). Every application that uses a PAM module actually calls a set of PAM functions, which then process the information in the various configuration files and return the result to the requesting application.

To simplify the creation and maintenance of PAM modules, common default configuration files for the types auth, account, password, and session modules have been introduced. These are retrieved from every application's PAM configuration. Updates to the global PAM configuration modules in common-* are thus propagated across all PAM configuration files without requiring the administrator to update every single PAM configuration file.

The global PAM configuration files are maintained using the pam-config tool. This tool automatically adds new modules to the configuration, changes the configuration of existing ones or deletes modules (or options) from the configurations. Manual intervention in maintaining PAM configurations is minimized or no longer required.

Note: 64-bit and 32-bit mixed installations

When using a 64-bit operating system, it is possible to also include a runtime environment for 32-bit applications. In this case, make sure that you also install the 32-bit version of the PAM modules.

Consider the PAM configuration of sshd as an example:

#%PAM-1.0 1
auth     requisite      pam_nologin.so                              2
auth     include        common-auth                                 3
account  requisite      pam_nologin.so                              2
account  include        common-account                              3
password include        common-password                             3
session  required       pam_loginuid.so                             4
session  include        common-session                              3
session  optional       pam_lastlog.so   silent noupdate showfailed 5

By including the configuration files instead of adding each module separately to the respective PAM configuration, you automatically get an updated PAM configuration when an administrator changes the defaults. Formerly, you needed to adjust all configuration files manually for all applications when changes to PAM occurred or a new application was installed. Now the PAM configuration is made with central configuration files and all changes are automatically inherited by the PAM configuration of each service.

The first include file (common-auth) calls three modules of the auth type: pam_env.so, pam_gnome_keyring.so and pam_unix.so. See Example 2.2, “Default configuration for the auth section (common-auth)”.

auth  required  pam_env.so                   1
auth  optional  pam_gnome_keyring.so         2
auth  required  pam_unix.so  try_first_pass 3

The whole stack of auth modules is processed before sshd gets any feedback about whether the login has succeeded. All modules of the stack having the required control flag must be processed successfully before sshd receives a message about the positive result. If one of the modules is not successful, the entire module stack is still processed and only then is sshd notified about the negative result.

When all modules of the auth type have been successfully processed, another include statement is processed, in this case, that in Example 2.3, “Default configuration for the account section (common-account)”. common-account contains only one module, pam_unix. If pam_unix returns the result that the user exists, sshd receives a message announcing this success and the next stack of modules (password) is processed, shown in Example 2.4, “Default configuration for the password section (common-password)”.

account  required  pam_unix.so  try_first_pass

password  requisite  pam_cracklib.so
password  optional   pam_gnome_keyring.so  use_authtok
password  required   pam_unix.so  use_authtok nullok shadow try_first_pass

Again, the PAM configuration of sshd involves only an include statement referring to the default configuration for password modules located in common-password. These modules must successfully be completed (control flags requisite and required) whenever the application requests the change of an authentication token.

Changing a password or another authentication token requires a security check. This is achieved with the pam_cracklib module. The pam_unix module used afterward carries over any old and new passwords from pam_cracklib, so the user does not need to authenticate again after changing the password. This procedure makes it impossible to circumvent the checks carried out by pam_cracklib. Whenever the account or the auth type are configured to complain about expired passwords, the password modules should also be used.

session  required  pam_limits.so
session  required  pam_unix.so  try_first_pass
session  optional  pam_umask.so
session  optional  pam_systemd.so
session  optional  pam_gnome_keyring.so auto_start only_if=gdm,gdm-password,lxdm,lightdm
session  optional  pam_env.so

As the final step, the modules of the session type (bundled in the common-session file) are called to configure the session according to the settings for the user in question. The pam_limits module loads the file /etc/security/limits.conf, which may define limits on the use of certain system resources. The pam_unix module is processed again. The pam_umask module can be used to set the file mode creation mask. Since this module carries the optional flag, a failure of this module would not affect the successful completion of the entire session module stack. The session modules are called a second time when the user logs out.

Some PAM modules are configurable. The configuration files are located in /etc/security. This section briefly describes the configuration files relevant to the sshd example—pam_env.conf and limits.conf.

VARIABLE  [DEFAULT=VALUE]  [OVERRIDE=VALUE]

REMOTEHOST  DEFAULT=localhost          OVERRIDE=@{PAM_RHOST}
DISPLAY     DEFAULT=${REMOTEHOST}:0.0  OVERRIDE=${DISPLAY}

2.4.2 pam_mount.conf.xml #

 

The purpose of pam_mount is to mount user home directories during the login process, and to unmount them during logout in an environment where a central file server keeps all the home directories of users. With this method, it is not necessary to mount a complete /home directory where all the user home directories would be accessible. Instead, only the home directory of the user who is about to log in, is mounted.

After installing pam_mount, a template for pam_mount.conf.xml is available in /etc/security. The description of the various elements can be found in the manual page man 5 pam_mount.conf.

A basic configuration of this feature can be done with YaST. Select Network Settings › Windows Domain Membership › Expert Settings to add the file server. See Section 20.5, “Configuring clients”.

Note: LUKS2 support

LUKS2 support was added to cryptsetup 2.0, and SUSE Linux Enterprise Server has included support for LUKS2 in pam_mount since SUSE Linux Enterprise Server 12 SP3.

The pam-config tool helps you configure the global PAM configuration files (/etc/pam.d/common-*) and several selected application configurations. For a list of supported modules, use the pam-config --list-modules command. Use the pam-config command to maintain your PAM configuration files. Add new modules to your PAM configurations, delete other modules or modify options to these modules. When changing global PAM configuration files, no manual tweaking of the PAM setup for individual applications is required.

A simple use case for pam-config involves the following:

For more information on the pam-config command and the options available, refer to the manual page of pam-config(8).

If you prefer to manually create or maintain your PAM configuration files, make sure to disable pam-config for these files.

When you create your PAM configuration files from scratch using the pam-config --create command, it creates symbolic links from the common-* to the common-*-pc files. pam-config only modifies the common-*-pc configuration files. Removing these symbolic links effectively disables pam-config, because pam-config only operates on the common-*-pc files and these files are not put into effect without the symbolic links.

Warning: Include pam_systemd.so in configuration

If you are creating your own PAM configuration, make sure to include pam_systemd.so configured as session optional. Not including the pam_systemd.so can cause problems with systemd task limits. For details, refer to the man page of pam_systemd.so.

In the /usr/share/doc/packages/pam directory after installing the pam-doc package, find the following additional documentation: