3 Authentication with PAM #

System administrators and programmers often want to restrict access to certain parts of the system or to limit the use of certain functions of an application. Without PAM, applications must be adapted every time a new authentication mechanism, such as LDAP, Samba, or Kerberos, is introduced. However, this process is time-consuming and error-prone. One way to avoid these drawbacks is to separate applications from the authentication mechanism and delegate authentication to centrally managed modules. Whenever a newly required authentication scheme is needed, it is sufficient to adapt or write a suitable PAM module for use by the program in question.

The PAM concept consists of:

PAM on SLE Micro comes with a set of configuration files stored in /etc/pam.d. Every service (or program) that relies on the PAM mechanism has its own configuration file in this directory. For example, the service for sshd can be found in the /etc/pam.d/sshd file.

The files under /etc/pam.d/ define the PAM modules used for authentication. Each file consists of lines, which define a service, and each line consists of a maximum of four components:

TYPE  CONTROL
 MODULE_PATH  MODULE_ARGS

The components have the following meaning:

In addition, there are global configuration files for PAM modules under /etc/security, which define the exact behavior of these modules (examples include pam_env.conf and time.conf). Every application that uses a PAM module actually calls a set of PAM functions, which then process the information in the various configuration files and return the result to the requesting application.

To simplify the creation and maintenance of PAM modules, common default configuration files for the types auth, account, password, and session modules have been introduced. These are retrieved from every application's PAM configuration. Updates to the global PAM configuration modules in common-* are thus propagated across all PAM configuration files without requiring the administrator to update every single PAM configuration file.

The global PAM configuration files are maintained using the pam-config tool. This tool automatically adds new modules to the configuration, changes the configuration of existing ones or deletes modules (or options) from the configurations. Manual intervention in maintaining PAM configurations is minimized or no longer required.

Consider the PAM configuration of sshd as an example:

#%PAM-1.0 1
auth     requisite      pam_nologin.so                              2
auth     include        common-auth                                 3
account  requisite      pam_nologin.so                              2
account  include        common-account                              3
password include        common-password                             3
session  required       pam_loginuid.so                             4
session  include        common-session                              3
session  optional       pam_lastlog.so   silent noupdate showfailed 5

By including the configuration files instead of adding each module separately to the respective PAM configuration, you automatically get an updated PAM configuration when an administrator changes the defaults. Formerly, you needed to adjust all configuration files manually for all applications when changes to PAM occurred or a new application was installed. Now the PAM configuration is made with central configuration files and all changes are automatically inherited by the PAM configuration of each service.

The first include file (common-auth) calls three modules of the auth type: pam_env.so, pam_gnome_keyring.so and pam_unix.so. See Example 3.2, “Default configuration for the auth section (common-auth)”.

auth  required  pam_env.so                   1
auth  optional  pam_gnome_keyring.so         2
auth  required  pam_unix.so  try_first_pass 3

The whole stack of auth modules is processed before sshd gets any feedback about whether the login has succeeded. All modules of the stack having the required control flag must be processed successfully before sshd receives a message about the positive result. If one of the modules is not successful, the entire module stack is still processed and only then is sshd notified about the negative result.

When all modules of the auth type have been successfully processed, another include statement is processed, in this case, that in Example 3.3, “Default configuration for the account section (common-account)”. common-account contains only one module, pam_unix. If pam_unix returns the result that the user exists, sshd receives a message announcing this success and the next stack of modules (password) is processed, shown in Example 3.4, “Default configuration for the password section (common-password)”.

account  required  pam_unix.so  try_first_pass

password  requisite  pam_cracklib.so
password  requisite   pam_cracklib.so  
password  required   pam_unix.so  use_authtok nullok shadow try_first_pass

Again, the PAM configuration of sshd involves only an include statement referring to the default configuration for password modules located in common-password. These modules must successfully be completed (control flags requisite and required) whenever the application requests the change of an authentication token.

Changing a password or another authentication token requires a security check. This is achieved with the pam_cracklib module. The pam_unix module used afterward carries over any old and new passwords from pam_cracklib, so the user does not need to authenticate again after changing the password. This procedure makes it impossible to circumvent the checks carried out by pam_cracklib. Whenever the account or the auth type are configured to complain about expired passwords, the password modules should also be used.

session  required  pam_selinux.so  close
session  optional  pam_systemd.so
session  required  pam_limits.so
session  required  pam_unix.so  try_first_pass
session  optional  pam_umask.so
session  required  pam_selinux.so  open
session  optional  pam_env.so

As the final step, the modules of the session type (bundled in the common-session file) are called to configure the session according to the settings for the user in question. The pam_limits module loads the file /etc/security/limits.conf, which may define limits on the use of certain system resources. The pam_unix module is processed again. The pam_umask module can be used to set the file mode creation mask. Since this module carries the optional flag, a failure of this module would not affect the successful completion of the entire session module stack. The session modules are called a second time when the user logs out.

Some PAM modules are configurable. The configuration files are located in /etc/security. This section briefly describes the configuration files relevant to the sshd example—pam_env.conf and limits.conf.

VARIABLE  [DEFAULT=VALUE]  [OVERRIDE=VALUE]

REMOTEHOST  DEFAULT=localhost          OVERRIDE=@{PAM_RHOST}
DISPLAY     DEFAULT=${REMOTEHOST}:0.0  OVERRIDE=${DISPLAY}

The pam-config tool helps you configure the global PAM configuration files (/etc/pam.d/common-*) and several selected application configurations. For a list of supported modules, use the pam-config --list-modules command. Use the pam-config command to maintain your PAM configuration files. Add new modules to your PAM configurations, delete other modules or modify options to these modules. When changing global PAM configuration files, no manual tweaking of the PAM setup for individual applications is required.

A simple use case for pam-config involves the following:

For more information on the pam-config command and the options available, refer to the manual page of pam-config(8).

If you prefer to manually create or maintain your PAM configuration files, make sure to disable pam-config for these files.

When you create your PAM configuration files from scratch using the pam-config --create command, it creates symbolic links from the common-* to the common-*-pc files. pam-config only modifies the common-*-pc configuration files. Removing these symbolic links effectively disables pam-config, because pam-config only operates on the common-*-pc files and these files are not put into effect without the symbolic links.

Warning: Include pam_systemd.so in configuration

If you are creating your own PAM configuration, make sure to include pam_systemd.so configured as session optional. Not including the pam_systemd.so can cause problems with systemd task limits. For details, refer to the man page of pam_systemd.so.

To provide more security during the local login , you can configure two-factor authentication using the pam-u2f framework and the U2F feature on Yubikeys and Security Keys.

To set up U2F on your system, you need to associate your key with your account . After that, configure your system to use the key. The procedure is described in the following sections.

3.7.1 Associating the U2F key with your account #

  

To associate your U2F key with your account proceed as follows:

1. Log in to your machine.

2. Insert your U2F key.

3. Create a directory for the U2F key configuration:

   > sudo mkdir -p ~/.config/Yubico

4. Run the pamu2fcfg that outputs configuration lines:

   > sudo pamu2fcfg > ~/.config/Yubico/u2f_keys

5. When your device begins flashing, touch the metal contact to confirm the association.

We recommend using a backup U2F device, which you can set up by running the following commands:

1. Run:

   > sudo pamu2fcfg -n >> ~/.config/Yubico/u2f_keys

2. When your device begins flashing, touch the metal contact to confirm the association.

You can move the output file from the default location to a directory that requires the sudo permission to modify the file to increase security, for example, to the /etc directory. To do so, follow the steps:

1. Create a directory in /etc:

   > sudo mkdir /etc/Yubico

2. Move the created file:

   > sudo mv ~/.config/Yubico/u2f_keys /etc/Yubico/u2f_keys

Note: Placing the u2f_keys to a non-default location

If you move the output file to a different directory than is the default ($HOME/.config/Yubico/u2f_keys), you need to add the path to the /etc/pam.d/login file as described in Section 3.7.2, “Updating the PAM configuration”.