Jump to contentJump to page navigation: previous page [access key p]/next page [access key n]
documentation.suse.com / SUSE Linux Enterprise Desktop Documentation / Deployment Guide / Setting up an installation server / Deploying customized preinstallations
Applies to SUSE Linux Enterprise Desktop 15 SP5

15 Deploying customized preinstallations

Rolling out customized preinstallations of SUSE Linux Enterprise Desktop to many identical machines spares you from installing each one of them separately and provides a standardized installation for the end users.

With YaST firstboot, create customized preinstallation images and determine the workflow for the final personalization steps that involve end user interaction (as opposed to AutoYaST, which allows completely automated installations).

Creating a custom installation, rolling it out to your hardware, and personalizing the final product involves the following steps:

  1. Prepare the master machine whose disk needs to be cloned to the client machines. For more information, refer to Section 15.1, “Preparing the master machine”.

  2. Customize the firstboot workflow. For more information, refer to Section 15.2, “Customizing the firstboot installation”.

  3. Clone the master machine's disk and roll this image out to the clients' disks. For more information, refer to Section 15.3, “Cloning the master installation”.

  4. Have the end user personalize the instance of SUSE Linux Enterprise Desktop. For more information, refer to Section 15.4, “Personalizing the installation”.

15.1 Preparing the master machine

To prepare a master machine for a firstboot workflow, proceed as follows:

  1. Insert the installation media into the master machine.

  2. Boot the machine.

  3. Perform a normal installation including all necessary configuration steps, and make sure to select the yast2-firstboot package for installation.

  4. To define your own workflow of YaST configuration steps for the end user or to add your own YaST modules to this workflow, proceed to Section 15.2, “Customizing the firstboot installation”. Otherwise proceed directly to Step 5.

  5. Enable firstboot as root:

    Create an empty file /var/lib/YaST2/reconfig_system to trigger firstboot's execution. This file will be deleted after the firstboot configuration has been successfully accomplished. Create this file using the following command:

    touch /var/lib/YaST2/reconfig_system
  6. Proceed to Section 15.3, “Cloning the master installation”.

15.2 Customizing the firstboot installation

Customizing the firstboot installation workflow may involve several components. Customizing them is recommended. If you do not make any changes, firstboot performs the installation using the default settings. The following options are available:

To customize any of these components, modify the following configuration files:

/etc/sysconfig/firstboot

Configure various aspects of firstboot (such as release notes, scripts, and license actions).

/etc/YaST2/firstboot.xml

Configure the installation workflow by enabling or disabling components or adding custom ones.

Provide translations for such a customized installation workflow, as described in Section 15.2.6, “Providing translations of the installation workflow”.

Tip
Tip: Alternative location of the control file

/etc/YaST2/firstboot.xml is the default path for the control file, installed by the yast2-firstboot package. If you need to define a different location for the control file, edit /etc/sysconfig/firstboot, and change the FIRSTBOOT_CONTROL_FILE variable to your preferred location.

If you want to customize more than the workflow components, refer to the control.xml documentation at https://doc.opensuse.org/projects/YaST/SLES11/tdg/inst_in_general_chap.html#product_control.

15.2.1 Customizing YaST messages

By default, an installation of SUSE Linux Enterprise Desktop contains several default messages that are localized and displayed at certain stages of the installation process. These include a welcome message, a license message, and a congratulatory message at the end of installation. You can replace any of these with your own versions and include localized versions of them in the installation. To include your own welcome message, proceed as follows:

  1. Log in as root.

  2. Open the /etc/sysconfig/firstboot configuration file and apply the following changes:

    1. Set FIRSTBOOT_WELCOME_DIR to the directory path where you want to store the files containing the welcome message and the localized versions, for example:

      FIRSTBOOT_WELCOME_DIR="/usr/share/firstboot/"
    2. If your welcome message has file names other than welcome.txt and welcome_locale.txt (where locale matches the ISO 639 language codes such as cs or de), specify the file name pattern in FIRSTBOOT_WELCOME_PATTERNS. For example:

      FIRSTBOOT_WELCOME_PATTERNS="mywelcome.txt"

      If unset, the default value of welcome.txt is assumed.

  3. Create the welcome file and the localized versions and place them in the directory specified in the /etc/sysconfig/firstboot configuration file.

Proceed in a similar way to configure customized license and finish messages. These variables are FIRSTBOOT_LICENSE_DIR and FIRSTBOOT_FINISH_FILE.

Change the SHOW_Y2CC_CHECKBOX to yes if the user needs to be able to start YaST directly after performing the installation.

15.2.2 Customizing the license action

You can customize the way the installation system reacts to a user's refusal to accept the license agreement. There are three different ways in which the system could react to this scenario:

halt

The firstboot installation is aborted and the entire system shuts down. This is the default setting.

continue

The firstboot installation continues.

abort

The firstboot installation is aborted, but the system attempts to boot.

Make your choice and set LICENSE_REFUSAL_ACTION to the appropriate value.

15.2.3 Customizing the release notes

Depending on whether you have changed the instance of SUSE Linux Enterprise Desktop you are deploying with firstboot, you might need to educate the end users about important aspects of their new operating system. A standard installation uses release notes (displayed during one of the final stages of the installation) to provide important information to the users. To have your own modified release notes displayed as part of a firstboot installation, proceed as follows:

  1. Create your own release notes file. Use the RTF format as in the example file in /usr/share/doc/release-notes and save the result as RELEASE-NOTES.en.rtf (for English).

  2. Store optional localized versions next to the original version and replace the en part of the file name with the actual ISO 639 language code, such as de for German.

  3. Open the firstboot configuration file from /etc/sysconfig/firstboot and set FIRSTBOOT_RELEASE_NOTES_PATH to the actual directory where the release notes files are stored.

15.2.4 Customizing the workflow

The provided /etc/YaST2/firstboot.xml example defines a standard workflow which includes the following enabled components:

  • Language Selection

  • Welcome

  • License Agreement

  • Time and Date

  • Users

  • Root Password

  • Finish Setup

Bear in mind that this workflow is a template. You can adjust it properly by manually editing the firstboot configuration file /etc/YaST2/firstboot.xml. This XML file is a subset of the standard control.xml file that is used by YaST to control the installation workflow. See Example 15.2, “Configuring the workflow section” to learn more about how to configure the workflow section.

For an overview of proposals, see Example 15.1, “Configuring the proposal screens”. This provides you with enough background to modify the firstboot installation workflow. The basic syntax of the firstboot configuration file (plus how the key elements are configured) is explained via this example.

Example 15.1: Configuring the proposal screens
    …
    <proposals config:type="list">1
        <proposal>2
            <name>firstboot_hardware</name>3
            <mode>installation</mode>4
            <stage>firstboot</stage>5
            <label>Hardware Configuration</label>6
            <proposal_modules config:type="list">7
                <proposal_module>printer</proposal_module>8
            </proposal_modules>
        </proposal>
        <proposal>
        …
        </proposal>
    </proposals>

1

The container for all proposals that should be part of the firstboot workflow.

2

The container for an individual proposal.

3

The internal name of the proposal.

4

The mode of this proposal. Do not make any changes here. For a firstboot installation, this must be set to installation.

5

The stage of the installation process at which this proposal is invoked. Do not make any changes here. For a firstboot installation, this must be set to firstboot.

6

The label to be displayed on the proposal.

7

The container for all modules that are part of the proposal screen.

8

One or more modules that are part of the proposal screen.

The next section of the firstboot configuration file consists of the workflow definition. All modules that should be part of the firstboot installation workflow must be listed here.

Example 15.2: Configuring the workflow section
    <workflows  config:type="list">
        <workflow>
            <defaults>
                <enable_back>yes</enable_back>
                <enable_next>yes</enable_next>
                <archs>all</archs>
            </defaults>
            <stage>firstboot</stage>
            <label>Configuration</label>
            <mode>installation</mode>
            … <!–– list of modules  ––>
            </modules>
        </workflow>
    </workflows>
    …

The overall structure of the workflows section is very similar to that of the proposals section. A container holds the workflow elements and the workflow elements all include stage, label and mode information (just as the proposals introduced in Example 15.1, “Configuring the proposal screens”). The most notable difference is the defaults section, which contains basic design information for the workflow components:

enable_back

Include the Back button in all dialogs.

enable_next

Include the Next button in all dialogs.

archs

Specify the hardware architectures on which this workflow should be used.

Example 15.3: Configuring the list of workflow components
    <modules  config:type="list">1
        <module>2
            <label>Language</label>3
            <enabled config:type="boolean">false</enabled>4
            <name>firstboot_language</name>5
        </module>
    <modules>

1

The container for all components of the workflow.

2

The module definition.

3

The label displayed with the module.

4

The switch to enable or disable this component in the workflow.

5

The module name. The module itself must be located under /usr/share/YaST2/clients.

To make changes to the number or order of proposal screens during the firstboot installation, proceed as follows:

  1. Open the firstboot configuration file at /etc/YaST2/firstboot.xml.

  2. Delete or add proposal screens or change the order of the existing ones:

    • To delete an entire proposal, remove the proposal element including all its sub-elements from the proposals section and remove the respective module element (with sub-elements) from the workflow.

    • To add a new proposal, create a new proposal element and fill in all the required sub-elements. Make sure that the proposal exists as a YaST module in /usr/share/YaST2/clients.

    • To change the order of proposals, move the respective module elements containing the proposal screens around in the workflow. Note that there may be dependencies on other installation steps that require a certain order of proposals and workflow components.

  3. Apply your changes and close the configuration file.

You can always change the workflow of the configuration steps if the default does not meet your needs. Enable or disable certain modules in the workflow (or add your own custom ones).

To toggle the status of a module in the firstboot workflow, proceed as follows:

  1. Open the /etc/YaST2/firstboot.xml configuration file.

  2. Change the value for the enabled element from true to false to disable the module or from false to true to enable it again.

    <module>
        <label>Time and Date</label>
        <enabled config:type="boolean">true</enabled>
        <name>firstboot_timezone</name>
    </module>
  3. Apply your changes and close the configuration file.

To add a custom made module to the workflow, proceed as follows:

  1. Create your own YaST module and store the module file module_name.rb in /usr/share/YaST2/clients.

  2. Open the /etc/YaST2/firstboot.xml configuration file.

  3. Determine at which point in the workflow your new module should be run. In doing so, make sure that any dependencies on other steps in the workflow are taken into account and resolved.

  4. Create a new module element inside the modules container and add the appropriate sub-elements:

    <modules config:type="list">
         …
         <module>
            <label>my_module</label>
            <enabled config:type="boolean">true</enabled>
            <name>filename_my_module</name>
         </module>
    </modules>
    1. Enter the label to be displayed on your module in the label element.

    2. Make sure that enabled is set to true to have your module included in the workflow.

    3. Enter the file name of your module in the name element. Omit the full path and the .rb suffix.

  5. Apply your settings and close the configuration file.

Tip
Tip: Finding connected network interface for auto-configuration

If the target hardware could feature more than one network interface, add the network-autoconfig package to the application image. network-autoconfig cycles through all available Ethernet interfaces until one is successfully configured via DHCP.

15.2.5 Configuring additional scripts

Firstboot can be configured to execute additional scripts after the firstboot workflow has been completed. To add additional scripts to the firstboot sequence, proceed as follows:

  1. Open the /etc/sysconfig/firstboot configuration file and make sure that the path specified for SCRIPT_DIR is correct. The default value is /usr/share/firstboot/scripts.

  2. Create your shell script, store it in the specified directory, and apply the appropriate file permissions.

15.2.6 Providing translations of the installation workflow

Depending on the end user it could be desirable to offer translations of the customized workflow. Those translations could be necessary if you customized the workflow by changing the /etc/YaST2/firstboot.xml file, as described in Section 15.2.4, “Customizing the workflow”.

If you have changed /etc/YaST2/firstboot.xml and introduced string changes, generate a new translation template file (.pot file) and use the gettext toolchain to translate and finally install the translated files in the YaST locale directories (/usr/share/YaST2/locale) as compiled .mo files. Proceed as follows:

  1. For example, change the textdomain setting from:

    <textdomain>firstboot</textdomain>

    to the following:

    <textdomain>firstboot-oem</textdomain>
  2. Use xgettext to extract the translatable strings to the translation template file (.pot file), for example to firstboot-oem.pot:

    xgettext -L Glade -o firstboot-oem.pot /etc/YaST2/firstboot.xml
  3. Start the translation process. Then package the translated files (.LL_code.po files) the same way as translations of the other projects and install the compiled firstboot-oem.mo files.

If you need translations for additional or changed YaST modules, provide translations within such a module itself. If you changed an existing module, make sure to change also its text-domain statement to avoid undesired side effects.

Tip
Tip: More information

For more information about YaST development, refer to https://en.opensuse.org/openSUSE:YaST_development. Detailed information about YaST firstboot can be found at https://doc.opensuse.org/projects/YaST/SLES11/tdg/bk09ch01s02.html.

15.3 Cloning the master installation

Clone the master machine's disk using any of the imaging mechanisms available to you, and roll these images out to the target machines. For more information about imaging, see https://doc.suse.com/kiwi/.

15.4 Personalizing the installation

When the cloned disk image is booted, firstboot starts and the installation proceeds exactly as laid out in Section 15.2.4, “Customizing the workflow”. Only the components included in the firstboot workflow configuration are started. All other installation steps are skipped. The end user adjusts language, keyboard, network, and password settings to personalize the workstation. After this process is finished, a firstboot installed system behaves as any other instance of SUSE Linux Enterprise Desktop.