Jump to contentJump to page navigation: previous page [access key p]/next page [access key n]
documentation.suse.com / Documentación de SUSE Enterprise Storage 7.1 / Troubleshooting Guide / Troubleshooting OSDs
Applies to SUSE Enterprise Storage 7.1

4 Troubleshooting OSDs

Before troubleshooting your OSDs, check your monitors and network first. If you execute ceph health or ceph -s on the command line and Ceph returns a health status, it means that the monitors have a quorum. If you do not have a monitor quorum or if there are errors with the monitor status, see Chapter 6, Troubleshooting Ceph Monitors and Ceph Managers. Check your networks to ensure they are running properly, because networks may have a significant impact on OSD operation and performance.

4.1 Obtain OSD data

To begin troubleshooting the OSDs, obtain any information including the information collected from Sección 12.9, “Supervisión de los OSD y los grupos de colocación”.

4.1.1 Finding Ceph logs

If you have not changed the default path, you can find Ceph log files at /var/log/ceph:

cephuser@adm > ls /var/log/ceph

If you do not get enough detail, change your logging level. See Chapter 2, Troubleshooting logging and debugging for more information.

4.1.2 Using the admin socket tool

Use the admin socket tool to retrieve runtime information. For details, list the sockets for your Ceph processes:

cephuser@adm > ls /var/run/ceph

Execute the following:

cephuser@adm > ceph daemon DAEMON-NAME help

Alternatively, specify a SOCKET-FILE:

cephuser@adm > ceph daemon SOCKET-FILE help

The admin socket, among other things, allows you to:

  • List your configuration at runtime

  • Dump historic operations

  • Dump the operation priority queue state

  • Dump operations in flight

  • Dump perfcounters

4.1.3 Displaying freespace

Filesystem issues may arise. To display your file system’s free space, execute df.

cephuser@adm > df -h

Execute df --help for additional usage.

4.1.4 Identifying I/O statistics

Use iostat to identify I/O-related issues.

cephuser@adm > iostat -x

4.1.5 Retrieving diagnostic messages

To retrieve diagnostic messages, use dmesg with less, more, grep or tail. For example:

cephuser@adm > dmesg | grep scsi

4.2 Stopping without rebalancing

Periodically you may need to perform maintenance on a subset of your cluster or resolve a problem that affects a failure domain. If you do not want CRUSH to automatically rebalance the cluster as you stop OSDs for maintenance, set the cluster to noout first:

cephuser@adm > ceph osd set noout

Once the cluster is set to noout, you can begin stopping the OSDs within the failure domain that requires maintenance work:

cephuser@adm > ceph orch daemon stop osd.ID
Note
Note

Placement groups within the OSDs you stop will become degraded while you are addressing issues with within the failure domain.

Once you have completed your maintenance, restart the OSDs:

cephuser@adm > ceph orch daemon start osd.ID

Finally, unset the cluster from noout:

cephuser@adm > ceph osd unset noout

4.3 OSDs not running

Under normal circumstances, restarting the ceph-osd daemon will allow it to rejoin the cluster and recover. If this is not true, continue on to the next section.

4.3.1 An OSD will not start

If an OSD will not start when you start your cluster and you are unable to determine the reason, we recommend generating a supportconfig and open a support ticket. For more information, see How do I submit a support case?

4.3.2 Failing OSD

When a ceph-osd process dies, the monitor learns about the failure from surviving ceph-osd daemons and reports it via the ceph health command:

cephuser@adm > ceph health
HEALTH_WARN 1/3 in osds are down

A warning displays whenever there are ceph-osd processes that are marked in and down. Identify which ceph-osds are down with:

cephuser@adm > ceph health detail
HEALTH_WARN 1/3 in osds are down
osd.0 is down since epoch 23, last address 192.168.106.220:6800/11080

If there is a disk failure or other fault preventing ceph-osd from functioning or restarting, an error message should be present in its log file. You can monitor the cephadm log in real time with the following command:

cephuser@adm > ceph -W cephadm

You can view the last few messages with:

cephuser@adm > ceph log last cephadm

If the daemon stopped because of a heartbeat failure, the underlying kernel file system may be unresponsive. Check dmesg output for disk or other kernel errors.

4.3.3 Preventing write action to OSD

Ceph prevents writing to a full OSD so that you do not lose data. In an operational cluster, you should receive a warning when your cluster is getting near its full ratio. The mon osd full ratio defaults to 0.95, or 95% of capacity before it stops clients from writing data. The mon osd backfillfull ratio defaults to 0.90, or 90% of capacity when it blocks backfills from starting. The OSD nearfull ratio defaults to 0.85, or 85% of capacity when it generates a health warning. Change this using the following command:

cephuser@adm > ceph osd set-nearfull-ratio <float[0.0-1.0]>

Full cluster issues usually arise when testing how Ceph handles an OSD failure on a small cluster. When one node has a high percentage of the cluster’s data, the cluster can easily eclipse its nearfull and full ratio immediately. If you are testing how Ceph reacts to OSD failures on a small cluster, you should leave ample free disk space and consider temporarily lowering the OSD full ratio, OSD backfillfull ratio and OSD nearfull ratio using these commands:

cephuser@adm > ceph osd set-nearfull-ratio <float[0.0-1.0]>
cephuser@adm > ceph osd set-full-ratio <float[0.0-1.0]>
cephuser@adm > ceph osd set-backfillfull-ratio <float[0.0-1.0]>

Full ceph-osds will be reported by ceph health:

cephuser@adm > ceph health
  HEALTH_WARN 1 nearfull osd(s)

Or:

cephuser@adm > ceph health detail
  HEALTH_ERR 1 full osd(s); 1 backfillfull osd(s); 1 nearfull osd(s)
  osd.3 is full at 97%
  osd.4 is backfill full at 91%
  osd.2 is near full at 87%

We recommend adding new ceph-osds to deal with a full cluster, allowing the cluster to redistribute data to the newly available storage. If you cannot start an OSD because it is full, you may delete some data by deleting some placement group directories in the full OSD.

Important
Important

If you choose to delete a placement group directory on a full OSD, do not delete the same placement group directory on another full OSD, or you may loose data. You must maintain at least one copy of your data on at least one OSD.

4.4 Unresponsive or slow OSDs

A commonly recurring issue involves slow or unresponsive OSDs. Ensure that you have eliminated other troubleshooting possibilities before delving into OSD performance issues. For example, ensure that your network(s) is working properly and your OSDs are running. Check to see if OSDs are throttling recovery traffic.

4.4.1 Identifying bad sectors and fragmented disks

Check your disks for bad sectors and fragmentation. This can cause total throughput to drop substantially.

4.4.2 Co-resident monitors and OSDs

Monitors are generally light-weight processes but often perform fsync(). This can interfere with other workloads, particularly if monitors run on the same drive as the OSDs. Additionally, if you run monitors on the same host as the OSDs, you may incur performance issues related to:

  • Running an older kernel (pre-3.0)

  • Running a kernel with no syncfs(2) syscall.

In these cases, multiple OSDs running on the same host can drag each other down by doing lots of commits. That often leads to the bursty writes.

4.4.3 Co-resident processes

Spinning up co-resident processes such as a cloud-based solution, virtual machines and other applications that write data to Ceph while operating on the same hardware as OSDs can introduce significant OSD latency. We recommend optimizing a host for use with Ceph and using other hosts for other processes. The practice of separating Ceph operations from other applications may help improve performance and may streamline troubleshooting and maintenance.

4.4.4 Logging levels

If you turned logging levels up to track an issue and then forgot to turn logging levels back down, the OSD may be putting a lot of logs onto the disk. If you intend to keep logging levels high, you may consider mounting a drive to the default path for logging. For example, /var/log/ceph/$cluster-$name.log.

4.4.5 Recovery throttling

Depending upon your configuration, Ceph may reduce recovery rates to maintain performance or it may increase recovery rates to the point that recovery impacts OSD performance. Check to see if the OSD is recovering.

4.4.6 Kernel version

Check the kernel version you are running. Older kernels may not receive new backports that Ceph depends upon for better performance.

4.4.7 Kernel issues with syncfs

Try running one OSD per host to see if performance improves. Old kernels might not have a recent enough version of glibc to support syncfs(2).

4.4.8 Filesystem issues

Currently, we recommend deploying clusters with XFS.

4.4.9 Insufficient RAM

We recommend 1.5 GB of RAM per TB of raw OSD capacity for each Object Storage Node. You may notice that during normal operations, the OSD only uses a fraction of that amount. Unused RAM makes it tempting to use the excess RAM for co-resident applications, VMs and so forth. However, when OSDs go into recovery mode, their memory utilization spikes. If there is no RAM available, the OSD performance will slow considerably.

4.4.10 Complaining about old or slow requests

If a ceph-osd daemon is slow to respond to a request, log messages will generate complaining about requests that are taking too long. The warning threshold defaults to 30 seconds, and is configurable via the osd op complaint time option. When this happens, the cluster log receives messages. Legacy versions of Ceph complain about old requests:

osd.0 192.168.106.220:6800/18813 312 : [WRN] old request \
  osd_op(client.5099.0:790 fatty_26485_object789 [write 0~4096] 2.5e54f643) \
  v4 received at 2012-03-06 15:42:56.054801 currently waiting for sub ops

Newer versions of Ceph complain about slow requests:

{date} {osd.num} [WRN] 1 slow requests, 1 included below; oldest blocked for > 30.005692 secs
{date} {osd.num}  [WRN] slow request 30.005692 seconds old, received at \
{date-time}: osd_op(client.4240.0:8 benchmark_data_ceph-1_39426_object7 \
[write 0~4194304] 0.69848840) v4 currently waiting for subops from [610]

Possible causes include:

  • A bad drive (check dmesg output)

  • A bug in the kernel file system (check dmesg output)

  • An overloaded cluster (check system load, iostat, etc.)

  • A bug in the ceph-osd daemon.

Possible solutions:

  • Remove VMs from Ceph hosts

  • Upgrade kernel

  • Upgrade Ceph

  • Restart OSDs

4.4.11 Debugging slow requests

If you run ceph daemon osd.<id> dump_historic_ops or ceph daemon osd.<id> dump_ops_in_flight, you see a set of operations and a list of events each operation went through. These are briefly described below.

Events from the Messenger layer:

header_read

When the messenger first started reading the message off the wire.

throttled

When the messenger tried to acquire memory throttle space to read the message into memory.

all_read

When the messenger finished reading the message off the wire.

dispatched

When the messenger gave the message to the OSD.

initiated

This is identical to header_read. The existence of both is a historical oddity.

Events from the OSD as it prepares operations:

queued_for_pg

The op has been put into the queue for processing by its PG.

reached_pg

The PG has started doing the op.

waiting for \*

The op is waiting for some other work to complete before it can proceed (e.g. a new OSDMap; for its object target to scrub; for the PG to finish peering; all as specified in the message).

started

The op has been accepted as something the OSD should do and is now being performed.

waiting for subops from

The op has been sent to replica OSDs.

Events from the FileStore:

commit_queued_for_journal_write:

The op has been given to the FileStore.

write_thread_in_journal_buffer

The op is in the journal’s buffer and waiting to be persisted (as the next disk write).

journaled_completion_queued

The op was journaled to disk and its callback queued for invocation.

Events from the OSD after stuff has been given to local disk:

op_commit

The op has been committed by the primary OSD.

op_applied

The op has been write()’en to the backing FS on the primary.

sub_op_applied: op_applied

For a replica’s “subop”.

sub_op_committed: op_commit

For a replica’s sub-op (only for EC pools).

sub_op_commit_rec/sub_op_apply_rec from <X>

The primary marks this when it hears about the above, but for a particular replica (i.e. <X>).

commit_sent

We sent a reply back to the client (or primary OSD, for sub ops).

Many of these events are seemingly redundant, but cross important boundaries in the internal code (such as passing data across locks into new threads).

4.5 OSD weight is 0

When OSD starts, it is assigned a weight. The higher the weight, the bigger the chance that the cluster writes data to the OSD. The weight is either specified in a cluster CRUSH Map, or calculated by the OSDs' start-up script.

4.6 OSD is down

OSD daemon is either running, or stopped/down. There are 3 general reasons why an OSD is down:

  • Hard disk failure.

  • The OSD crashed.

  • The server crashed.

You can see the detailed status of OSDs by running

cephuser@adm > ceph osd tree
# id  weight  type name up/down reweight
 -1    0.02998  root default
 -2    0.009995   host doc-ceph1
 0     0.009995      osd.0 up  1
 -3    0.009995   host doc-ceph2
 1     0.009995      osd.1 up  1
 -4    0.009995   host doc-ceph3
 2     0.009995      osd.2 down

The example listing shows that the osd.2 is down. Then you may check if the disk where the OSD is located is mounted:

# lsblk -f
NAME                                                                                                  FSTYPE      LABEL UUID                                   FSAVAIL FSUSE% MOUNTPOINT
vda
├─vda1
├─vda2                                                                                                vfat        EFI   7BDD-40C3                                18.8M     6% /boot/efi
└─vda3                                                                                                ext4        ROOT  144d3eec-c193-4793-b6a9-1ac295259f4b     36.7G     5% /
vdb                                                                                                   LVM2_member       Fj8nlY-Dnmm-8Y0w-tJrO-8rAe-SUTH-lA2Ux2
└─ceph--6dc6f71f--ff02--4316--b145--c7804d5fb2f4-osd--block--2cb16f65--c87d--405d--a913--4e4ea6037ca1
vdc                                                                                                   LVM2_member       0101m1-mc83-K8ce-j4Dv-yxUO-5KPj-6FpuSu
└─ceph--1082eac0--4478--48cf--b8ab--4d3a62ca1c27-osd--data--185c9dd6--ce28--4b98--a9b6--9d5b1f444a4f
vdd                                                                                                   LVM2_member       wqE8sC-w5mx-J9t1-FoM1-vIRC-0xxq-5FPyuL
└─ceph--9e71d81a--e394--49b7--bef9--b639083be779-osd--data--eb94f8e6--af6d--4ef6--911b--7f44f7484c85

You can track the reason why the OSD is down by inspecting its log file. See Section 4.3.2, “Failing OSD” for instructions on how to source the log files. After you find and fix the reason why the OSD is not running, start it with the following command. To identify the unique FSID of the cluster, run ceph fsid. To identify the Object Gateway daemon name, run ceph orch ps ---hostname HOSTNAME.

# systemctl start ceph-FSID@osd.2

Do not forget to replace 2 with the actual number of your stopped OSD.

4.7 Finding slow OSDs

When tuning the cluster performance, it is very important to identify slow storage/OSDs within the cluster. The reason is that if the data is written to the slow(est) disk, the complete write operation slows down as it always waits until it is finished on all the related disks.

It is not trivial to locate the storage bottleneck. You need to examine each and every OSD to find out the ones slowing down the write process. To do a benchmark on a single OSD, run:

ceph tell osd.OSD_ID_NUMBER bench

For example:

cephuser@adm > ceph tell osd.0 bench
 { "bytes_written": 1073741824,
   "blocksize": 4194304,
   "bytes_per_sec": "19377779.000000"}

Then you need to run this command on each OSD and compare the bytes_per_sec value to get the slow(est) OSDs.

4.8 Flapping OSDs

We recommend using both a public (front-end) network and a cluster (back-end) network so that you can better meet the capacity requirements of object replication. Another advantage is that you can run a cluster network such that it is not connected to the internet, thereby preventing some denial of service attacks. When OSDs peer and check heartbeats, they use the cluster (back-end) network when it’s available.

However, if the cluster (back-end) network fails or develops significant latency while the public (front-end) network operates optimally, OSDs currently do not handle this situation well. What happens is that OSDs mark each other down on the monitor, while marking themselves up. This is called flapping.

If something is causing OSDs to flap (repeatedly getting marked down and then up again), you can force the monitors to stop the flapping with:

cephuser@adm > ceph osd set noup      # prevent OSDs from getting marked up
cephuser@adm > ceph osd set nodown    # prevent OSDs from getting marked down

These flags are recorded in the osdmap structure:

cephuser@adm > ceph osd dump | grep flags
flags no-up,no-down

You can clear the flags with:

cephuser@adm > ceph osd unset noup
cephuser@adm > ceph osd unset nodown

Two other flags are supported, noin and noout, which prevent booting OSDs from being marked in (allocated data) or protect OSDs from eventually being marked out (regardless of what the current value for mon osd down out interval is).

Note
Note

noup, noout, and nodown are temporary in the sense that once the flags are cleared, the action they were blocking should occur shortly after. The noin flag, on the other hand, prevents OSDs from being marked in on boot, and any daemons that started while the flag was set will remain that way.