Jump to contentJump to page navigation: previous page [access key p]/next page [access key n]
documentation.suse.com / Documentation SUSE Linux Enterprise Desktop / Administration Guide / Common tasks / YaST in text mode
Applies to SUSE Linux Enterprise Desktop 15 SP6

4 YaST in text mode

The ncurses-based pseudo-graphical YaST interface is designed primarily to help system administrators to manage systems without an X server. The interface offers several advantages compared to the conventional GUI. You can navigate the ncurses interface using the keyboard, and there are keyboard shortcuts for practically all interface elements. The ncurses interface is light on resources, and runs fast even on modest hardware. You can run the ncurses-based version of YaST via an SSH connection, so you can administer remote systems. Keep in mind that the minimum supported size of the terminal emulator in which to run YaST is 80x25 characters.

Main window of YaST in text mode
Figure 4.1: Main window of YaST in text mode

To launch the ncurses-based version of YaST, open the terminal and run the sudo yast2 command. Use the →| or arrow keys to navigate between interface elements like menu items, fields and buttons. All menu items and buttons in YaST can be accessed using the appropriate function keys or keyboard shortcuts. For example, you can cancel the current operation by pressing F9, while the F10 key can be used to accept the changes. Each menu item and button in YaST's ncurses-based interface has a highlighted letter in its label. This letter is part of the keyboard shortcut assigned to the interface element. For example, the letter Q is highlighted in the Quit button. This means that you can activate the button by pressing AltAlt+Q.

Tip
Tip: Refreshing YaST dialogs

If a YaST dialog gets corrupted or distorted, for example, while resizing the window, press CtrlL to refresh and restore its contents.

4.1 Navigation in modules

The following description of the control elements in the YaST modules assumes that all function keys and Alt key combinations work and are not assigned to different global functions. Read Section 4.3, “Restriction of key combinations” for information about possible exceptions.

Moving between buttons and selection lists

Use →| to move between the buttons and frames containing selection lists. To navigate in the opposite direction, use Alt→| or Shift→| combinations.

Navigating in selection lists

Use the arrow keys ( and ) to move through the individual elements in an active frame containing a selection list. If individual entries are longer than the frame's width, use Shift or Shift to scroll horizontally. If the arrow key causes the selection to move to another frame, use CtrlE or CtrlA instead.

Working with buttons, radio buttons, and check boxes

To select items with empty square brackets (check boxes) or empty parentheses (radio buttons), press Space or Enter. Alternatively, radio buttons and check boxes can be selected directly with Althighlighted_letter. In this case, you do not need to confirm with Enter. If you navigate to an item with →|, press Enter to execute the selected action or activate the respective menu item.

Function keys

The function keys (from F1 to F12) enable quick access to the specific buttons. Available function key combinations (FX) are shown in the bottom line of the YaST screen. Which function keys are really mapped to which buttons depend on the active YaST module, because the different modules offer different buttons (Details, Info, Add, Delete, etc.). Use F10 for Accept, OK, Next, and Finish. Press F1 to access the YaST help.

Using the navigation tree

Certain YaST modules use a navigation tree in the left part of the window to select configuration dialogs. Use the arrow keys ( and ) to navigate in the tree. Use Space to open or close tree items. In the ncurses mode, Enter must be pressed after a selection in the navigation tree to show the selected dialog. This is an intentional behavior to save time-consuming redraws when browsing through the navigation tree.

Selecting software in the software installation module

Use the filters on the left side to list packages matching the specified string. Installed packages are marked with the letter i. To change the status of a package, press Space or Enter. Alternatively, use the Actions menu to select the needed status change (install, delete, update, taboo or lock).

The software installation module
Figure 4.2: The software installation module

4.2 Advanced key combinations

The ncurses-based version of YaST offers several advanced key combinations.

ShiftF1

List advanced hotkeys.

ShiftF4

Change color schema.

CtrlQ

Quit the application.

CtrlL

Refresh screen.

CtrlDF1

List advanced hotkeys.

CtrlDShiftD

Dump dialog to the log file as a screenshot.

CtrlDShiftY

Open YDialogSpy to see the widget hierarchy.

4.3 Restriction of key combinations

If your window manager uses global Alt combinations, the Alt combinations in YaST may not work. Keys like Alt or Shift can also be occupied by the settings of the terminal.

Using Alt instead of Esc

Alt shortcuts can be executed with Esc instead of Alt. For example, EscH replaces AltH. (Press Esc, then press H.)

Backward and forward navigation with CtrlF and CtrlB

If the Alt and Shift combinations are taken over by the window manager or the terminal, use the combinations CtrlF (forward) and CtrlB (backward) instead.

Restriction of function keys

The function keys (F1 ... F12) are also used for functions. Certain function keys may be taken over by the terminal and may not be available for YaST. However, the Alt key combinations and function keys should always be fully available on a text-only console.

4.4 YaST command line options

Besides the text mode interface, YaST provides a command line interface. To get a list of YaST command line options, use the following command:

> sudo yast -h

4.4.1 Installing packages from the command line

If you know the package name, and the package is provided by an active installation repository, you can use the command line option -i to install the package:

> sudo yast -i package_name

or

> sudo yast --install -i package_name

package_name can be a single short package name, for example, gvim, installed with dependency checking, or the full path to an RPM package, which is installed without dependency checking.

While YaST offers basic functionality for managing software from the command line, consider using Zypper for more advanced package management tasks. Find more information on using Zypper in Section 9.1, “Using Zypper”.

4.4.2 Working with individual modules

To save time, you can start individual YaST modules using the following command:

> sudo yast module_name

View a list of all modules available on your system with yast -l or yast --list.

4.4.3 Command line parameters of YaST modules

To use YaST functionality in scripts, YaST provides command line support for individual modules. However, not all modules have command line support. To display the available options of a module, use the following command:

> sudo yast module_name help

If a module does not provide command line support, it is started in a text mode with the following message:

This YaST module does not support the command line interface.

The following sections describe all YaST modules with command line support, along with a brief explanation of all their commands and available options.

4.4.3.1 Common YaST module commands

All YaST modules support the following commands:

help

Lists all the module's supported commands with their description:

> sudo yast lan help
longhelp

Same as help, but adds a detailed list of all command's options and their descriptions:

> sudo yast lan longhelp
xmlhelp

Same as longhelp, but the output is structured as an XML document and redirected to a file:

> sudo yast lan xmlhelp xmlfile=/tmp/yast_lan.xml
interactive

Enters the interactive mode. This lets you run the module's commands without prefixing them with sudo yast. Use exit to leave the interactive mode.

4.4.3.2 yast add-on

Adds a new add-on product from the specified path:

 > sudo yast add-on http://server.name/directory/Lang-AddOn-CD1/

You can use the following protocols to specify the source path: http:// ftp:// nfs:// disk:// cd:// or dvd://.

4.4.3.3 yast audit-laf

Displays and configures the Linux Audit Framework. Refer to the Part VI, “The Linux Audit Framework” for more details. yast audit-laf accepts the following commands:

set

Sets an option:

> sudo yast audit-laf set log_file=/tmp/audit.log

For a complete list of options, run yast audit-laf set help.

show

Displays settings of an option:

> sudo yast audit-laf show diskspace
space_left: 75
space_left_action: SYSLOG
admin_space_left: 50
admin_space_left_action: SUSPEND
action_mail_acct: root
disk_full_action: SUSPEND
disk_error_action: SUSPEND

For a complete list of options, run yast audit-laf show help.

4.4.3.4 yast dhcp-server

Manages the DHCP server and configures its settings. yast dhcp-server accepts the following commands:

disable

Disables the DHCP server service.

enable

Enables the DHCP server service.

host

Configures settings for individual hosts.

interface

Specifies to which network interface to listen to:

> sudo yast dhcp-server interface current
Selected Interfaces: eth0
Other Interfaces: bond0, pbu, eth1

For a complete list of options, run yast dhcp-server interface help.

options

Manages global DHCP options. For a complete list of options, run yast dhcp-server options help.

status

Prints the status of the DHCP service.

subnet

Manages the DHCP subnet options. For a complete list of options, run yast dhcp-server subnet help.

4.4.3.5 yast dns-server

Manages the DNS server configuration. yast dns-server accepts the following commands:

acls

Displays access control list settings:

 > sudo yast dns-server acls show
 ACLs:
 -----
  Name       Type        Value
  ----------------------------
  any        Predefined
  localips   Predefined
  localnets  Predefined
  none       Predefined
dnsrecord

Configures zone resource records:

> sudo yast dnsrecord add zone=example.org query=office.example.org type=NS value=ns3

For a complete list of options, run yast dns-server dnsrecord help.

forwarders

Configures DNS forwarders:

> sudo yast dns-server forwarders add ip=10.0.0.100
> sudo yast dns-server forwarders show
[...]
Forwarder IP
------------
10.0.0.100

For a complete list of options, run yast dns-server forwarders help.

host

Handles A and its related PTR record at once:

> sudo yast dns-server host show zone=example.org

For a complete list of options, run yast dns-server host help.

logging

Configures logging settings:

> sudo yast dns-server logging set updates=no transfers=yes

For a complete list of options, run yast dns-server logging help.

mailserver

Configures zone mail servers:

> sudo yast dns-server mailserver add zone=example.org mx=mx1 priority=100

For a complete list of options, run yast dns-server mailserver help.

nameserver

Configures zone name servers:

> sudo yast dns-server nameserver add zone=example.com ns=ns1

For a complete list of options, run yast dns-server nameserver help.

soa

Configures the start of authority (SOA) record:

> sudo yast dns-server soa set zone=example.org serial=2006081623 ttl=2D3H20S

For a complete list of options, run yast dns-server soa help.

startup

Manages the DNS server service:

> sudo yast dns-server startup atboot

For a complete list of options, run yast dns-server startup help.

transport

Configures zone transport rules. For a complete list of options, run yast dns-server transport help.

zones

Manages DNS zones:

> sudo yast dns-server zones add name=example.org zonetype=master

For a complete list of options, run yast dns-server zones help.

4.4.3.6 yast disk

Prints information about all disks or partitions. The only supported command is list followed by either of the following options:

disks

Lists all configured disks in the system:

> sudo yast disk list disks
Device   | Size       | FS Type | Mount Point | Label | Model
---------+------------+---------+-------------+-------+-------------
/dev/sda | 119.24 GiB |         |             |       | SSD 840
/dev/sdb |  60.84 GiB |         |             |       | WD1003FBYX-0
partitions

Lists all partitions in the system:

> sudo yast disk list partitions
Device         | Size       | FS Type | Mount Point | Label | Model
---------------+------------+---------+-------------+-------+------
/dev/sda1      |   1.00 GiB | Ext2    | /boot       |       |
/dev/sdb1      |   1.00 GiB | Swap    | swap        |       |
/dev/sdc1      | 698.64 GiB | XFS     | /mnt/extra  |       |
/dev/vg00/home | 580.50 GiB | Ext3    | /home       |       |
/dev/vg00/root | 100.00 GiB | Ext3    | /           |       |
[...]

4.4.3.7 yast ftp-server

Configures FTP server settings. yast ftp-server accepts the following options:

SSL, TLS

Controls secure connections via SSL and TLS. SSL options are valid for the vsftpd only.

> sudo yast ftp-server SSL enable
> sudo yast ftp-server TLS disable
access

Configures access permissions:

> sudo yast ftp-server access authen_only

For a complete list of options, run yast ftp-server access help.

anon_access

Configures access permissions for anonymous users:

> sudo yast ftp-server anon_access can_upload

For a complete list of options, run yast ftp-server anon_access help.

anon_dir

Specifies the directory for anonymous users. The directory must already exist on the server:

> sudo yast ftp-server anon_dir set_anon_dir=/srv/ftp

For a complete list of options, run yast ftp-server anon_dir help.

chroot

Controls change root environment (chroot):

> sudo yast ftp-server chroot enable
> sudo yast ftp-server chroot disable
idle-time

Sets the maximum idle time in minutes before FTP server terminates the current connection:

> sudo yast ftp-server idle-time set_idle_time=15
logging

Determines whether to save the log messages into a log file:

> sudo yast ftp-server logging enable
> sudo yast ftp-server logging disable
max_clients

Specifies the maximum number of concurrently connected clients:

> sudo yast ftp-server max_clients set_max_clients=1500
max_clients_ip

Specifies the maximum number of concurrently connected clients via IP:

> sudo yast ftp-server max_clients_ip set_max_clients=20
max_rate_anon

Specifies the maximum data transfer rate permitted for anonymous clients (KB/s):

> sudo yast ftp-server max_rate_anon set_max_rate=10000
max_rate_authen

Specifies the maximum data transfer rate permitted for locally authenticated users (KB/s):

> sudo yast ftp-server max_rate_authen set_max_rate=10000
port_range

Specifies the port range for passive connection replies:

> sudo yast ftp-server port_range set_min_port=20000 set_max_port=30000

For a complete list of options, run yast ftp-server port_range help.

show

Displays FTP server settings.

startup

Controls the FTP start-up method:

> sudo yast ftp-server startup atboot

For a complete list of options, run yast ftp-server startup help.

umask

Specifies the file umask for authenticated:anonymous users:

> sudo yast ftp-server umask set_umask=177:077
welcome_message

Specifies the text to display when someone connects to the FTP server:

> sudo yast ftp-server welcome_message set_message="hello everybody"

4.4.3.8 yast http-server

Configures the HTTP server (Apache2). yast http-server accepts the following commands:

configure

Configures the HTTP server host settings:

> sudo yast http-server configure host=main servername=www.example.com \
 serveradmin=admin@example.com

For a complete list of options, run yast http-server configure help.

hosts

Configures virtual hosts:

> sudo yast http-server hosts create servername=www.example.com \
 serveradmin=admin@example.com documentroot=/var/www

For a complete list of options, run yast http-server hosts help.

listen

Specifies the ports and network addresses where the HTTP server should listen:

> sudo yast http-server listen add=81
> sudo yast http-server listen list
Listen Statements:
==================
:80
:81
> sudo yast http-server delete=80

For a complete list of options, run yast http-server listen help.

mode

Enables or disables the wizard mode:

> sudo yast http-server mode wizard=on
modules

Controls the Apache2 server modules:

> sudo yast http-server modules enable=php5,rewrite
> sudo yast http-server modules disable=ssl
> sudo http-server modules list
[...]
Enabled rewrite
Disabled ssl
Enabled php5
[...]

4.4.3.9 yast kdump

Configures kdump settings. For more information on kdump, refer to the Section 18.7, “Basic Kdump configuration”. yast kdump accepts the following commands:

copykernel

Copies the kernel into the dump directory.

customkernel

Specifies the kernel_string part of the name of the custom kernel. The naming scheme is /boot/vmlinu[zx]-kernel_string[.gz].

> sudo yast kdump customkernel kernel=kdump

For a complete list of options, run yast kdump customkernel help.

dumpformat

Specifies the (compression) format of the dump kernel image. Available formats are none, ELF, compressed or lzo:

> sudo yast kdump dumpformat dump_format=ELF
dumplevel

Specifies the dump level number in the range from 0 to 31:

> sudo yast kdump dumplevel dump_level=24
dumptarget

Specifies the destination for saving dump images:

> sudo kdump dumptarget target=ssh server=name_server port=22 \
 dir=/var/log/dump user=user_name

For a complete list of options, run yast kdump dumptarget help.

immediatereboot

Controls whether the system should reboot immediately after saving the core in the Kdump kernel:

> sudo yast kdump immediatereboot enable
> sudo yast kdump immediatereboot disable
keepolddumps

Specifies how many old dump images are kept. Specify zero to keep them all:

> sudo yast kdump keepolddumps no=5
kernelcommandline

Specifies the command line that needs to be passed off to the Kdump kernel:

> sudo yast kdump kernelcommandline command="ro root=LABEL=/"
kernelcommandlineappend

Specifies the command line that you need to append to the default command line string:

> sudo yast kdump kernelcommandlineappend command="ro root=LABEL=/"
notificationcc

Specifies an e-mail address for sending copies of notification messages:

> sudo yast kdump notificationcc email="user1@example.com user2@example.com"
notificationto

Specifies an e-mail address for sending notification messages:

> sudo yast kdump notificationto email="user1@example.com user2@example.com"
show

Displays kdump settings:

> sudo yast kdump show
Kdump is disabled
Dump Level: 31
Dump Format: compressed
Dump Target Settings
target: file
file directory: /var/crash
Kdump immediate reboots: Enabled
Numbers of old dumps: 5
smtppass

Specifies the file with the plain text SMTP password used for sending notification messages:

> sudo yast kdump smtppass pass=/path/to/file
smtpserver

Specifies the SMTP server host name used for sending notification messages:

> sudo yast kdump smtpserver server=smtp.server.com
smtpuser

Specifies the SMTP user name used for sending notification messages:

> sudo yast kdump smtpuser user=smtp_user
startup

Enables or disables start-up options:

> sudo yast kdump startup enable alloc_mem=128,256
> sudo yast kdump startup disable

4.4.3.10 yast keyboard

Configures the system keyboard for virtual consoles. It does not affect the keyboard settings in graphical desktop environments, such as GNOME or KDE. yast keyboard accepts the following commands:

list

Lists all available keyboard layouts.

set

Activates new keyboard layout setting:

> sudo yast keyboard set layout=czech
summary

Displays the current keyboard configuration.

4.4.3.11 yast lan

Configures network cards. yast lan accepts the following commands:

add

Configures a new network card:

> sudo yast lan add name=vlan50 ethdevice=eth0 bootproto=dhcp

For a complete list of options, run yast lan add help.

delete

Deletes an existing network card:

> sudo yast lan delete id=0
edit

Changes the configuration of an existing network card:

> sudo yast lan edit id=0 bootproto=dhcp
list

Displays a summary of network card configuration:

> sudo yast lan list
id name,           bootproto
0 Ethernet Card 0, NONE
1 Network Bridge,  DHCP

4.4.3.12 yast language

Configures system languages. yast language accepts the following commands:

list

Lists all available languages.

set

Specifies the main system languages and secondary languages:

> sudo yast language set lang=cs_CZ languages=en_US,es_ES no_packages

4.4.3.13 yast mail

Displays the configuration of the mail system:

> sudo yast mail summary

4.4.3.14 yast nfs

Controls the NFS client. yast nfs accepts the following commands:

add

Adds a new NFS mount:

> sudo yast nfs add spec=remote_host:/path/to/nfs/share file=/local/mount/point

For a complete list of options, run yast nfs add help.

delete

Deletes an existing NFS mount:

> sudo yast nfs delete spec=remote_host:/path/to/nfs/share file=/local/mount/point

For a complete list of options, run yast nfs delete help.

edit

Changes an existing NFS mount:

> sudo yast nfs edit spec=remote_host:/path/to/nfs/share \
 file=/local/mount/point type=nfs4

For a complete list of options, run yast nfs edit help.

list

Lists existing NFS mounts:

> sudo yast nfs list
Server            Remote File System    Mount Point    Options
----------------------------------------------------------------
nfs.example.com   /mnt                  /nfs/mnt       nfs
nfs.example.com   /home/tux/nfs_share   /nfs/tux       nfs

4.4.3.15 yast nfs-server

Configures the NFS server. yast nfs-server accepts the following commands:

add

Adds a directory to export:

> sudo yast nfs-server add mountpoint=/nfs/export hosts=*.allowed_hosts.com

For a complete list of options, run yast nfs-server add help.

delete

Deletes a directory from the NFS export:

 > sudo yast nfs-server delete mountpoint=/nfs/export
set

Specifies additional parameters for the NFS server:

> sudo yast nfs-server set enablev4=yes security=yes

For a complete list of options, run yast nfs-server set help.

start

Starts the NFS server service:

> sudo yast nfs-server start
stop

Stops the NFS server service:

> sudo yast nfs-server stop
summary

Displays a summary of the NFS server configuration:

> sudo yast nfs-server summary
NFS server is enabled
NFS Exports
* /mnt
* /home

NFSv4 support is enabled.
The NFSv4 domain for idmapping is localdomain.
NFS Security using GSS is enabled.

4.4.3.16 yast nis

Configures the NIS client. yast nis accepts the following commands:

configure

Changes global settings of a NIS client:

> sudo yast nis configure server=nis.example.com broadcast=yes

For a complete list of options, run yast nis configure help.

disable

Disables the NIS client:

> sudo yast nis disable
enable

Enables your machine as NIS client:

> sudo yast nis enable server=nis.example.com broadcast=yes automounter=yes

For a complete list of options, run yast nis enable help.

find

Shows available NIS servers for a given domain:

> sudo yast nis find domain=nisdomain.com
summary

Displays a configuration summary of a NIS client.

4.4.3.17 yast nis-server

Configures a NIS server. yast nis-server accepts the following commands:

master

Configures a NIS master server:

> sudo yast nis-server master domain=nisdomain.com yppasswd=yes

For a complete list of options, run yast nis-server master help.

slave

Configures a NIS worker server:

> sudo yast nis-server slave domain=nisdomain.com master_ip=10.100.51.65

For a complete list of options, run yast nis-server slave help.

stop

Stops a NIS server:

> sudo yast nis-server stop
summary

Displays a configuration summary of a NIS server:

> sudo yast nis-server summary

4.4.3.18 yast proxy

Configures proxy settings. yast proxy accepts the following commands:

authentication

Specifies the authentication options for proxy:

> sudo yast proxy authentication username=tux password=secret

For a complete list of options, run yast proxy authentication help.

enable, disable

Enables or disables proxy settings.

set

Changes the current proxy settings:

> sudo yast proxy set https=proxy.example.com

For a complete list of options, run yast proxy set help.

summary

Displays proxy settings.

4.4.3.19 yast rdp

Controls remote desktop settings. yast rdp accepts the following commands:

allow

Allows remote access to the server's desktop:

> sudo yast rdp allow set=yes
list

Displays the remote desktop configuration summary.

4.4.3.20 yast samba-client

Configures the Samba client settings. yast samba-client accepts the following commands:

configure

Changes global settings of Samba:

> sudo yast samba-client configure workgroup=FAMILY
isdomainmember

Checks whether the machine is a member of a domain:

> sudo yast samba-client isdomainmember domain=SMB_DOMAIN
joindomain

Makes the machine a member of a domain:

> sudo yast samba-client joindomain domain=SMB_DOMAIN user=username password=pwd
winbind

Enables or disables Winbind services (the winbindd daemon):

> sudo yast samba-client winbind enable
> sudo yast samba-client winbind disable

4.4.3.21 yast samba-server

Configures Samba server settings. yast samba-server accepts the following commands:

backend

Specifies the back-end for storing user information:

> sudo yast samba-server backend smbpasswd

For a complete list of options, run yast samba-server backend help.

configure

Configures global settings of the Samba server:

> sudo yast samba-server configure workgroup=FAMILY description='Home server'

For a complete list of options, run yast samba-server configure help.

list

Displays a list of available shares:

> sudo yast samba-server list
Status     Type Name
==============================
Disabled   Disk profiles
Enabled    Disk print$
Enabled    Disk homes
Disabled   Disk groups
Enabled    Disk movies
Enabled    Printer printers
role

Specifies the role of the Samba server:

> sudo yast samba-server role standalone

For a complete list of options, run yast samba-server role help.

service

Enables or disables the Samba services (smb and nmb):

> sudo yast samba-server service enable
> sudo yast samba-server service disable
share

Manipulates a single Samba share:

> sudo yast samba-server share name=movies browseable=yes guest_ok=yes

For a complete list of options, run yast samba-server share help.

4.4.3.22 yast security

Controls the security level of the host. yast security accepts the following commands:

level

Specifies the security level of the host:

> sudo yast security level server

For a complete list of options, run yast security level help.

set

Sets the value of a specific option:

> sudo yast security set passwd=sha512 crack=yes

For a complete list of options, run yast security set help.

summary

Displays a summary of the current security configuration:

sudoyast security summary

4.4.3.23 yast sound

Configures sound card settings. yast sound accepts the following commands:

add

Configures a new sound card. Without any parameters, the command adds the first detected card.

> sudo yast sound add card=0 volume=75

For a complete list of options, run yast sound add help.

channels

Lists available volume channels of a sound card:

> sudo yast sound channels card=0
Master 75
PCM 100
modules

Lists all available sound kernel modules:

> sudo yast sound modules
snd-atiixp ATI IXP AC97 controller (snd-atiixp)
snd-atiixp-modem ATI IXP MC97 controller (snd-atiixp-modem)
snd-virtuoso Asus Virtuoso driver (snd-virtuoso)
[...]
playtest

Plays a test sound on a sound card:

> sudo yast sound playtest card=0
remove

Removes a configured sound card:

> sudo yast sound remove card=0
> sudo yast sound remove all
set

Specifies new values for a sound card:

> sudo yast sound set card=0 volume=80
show

Displays detailed information about a sound card:

> sudo yast sound show card=0
Parameters of card 'ThinkPad X240' (using module snd-hda-intel):

align_buffer_size
 Force buffer and period sizes to be multiple of 128 bytes.
bdl_pos_adj
 BDL position adjustment offset.
beep_mode
 Select HDA Beep registration mode (0=off, 1=on) (default=1).
 Default Value: 0
enable_msi
 Enable Message Signaled Interrupt (MSI)
[...]
summary

Prints a configuration summary for all sound cards on the system:

> sudo yast sound summary
volume

Specifies the volume level of a sound card:

sudoyast sound volume card=0 play

4.4.3.24 yast sysconfig

Controls the variables in files under /etc/sysconfig. yast sysconfig accepts the following commands:

clear

Sets empty value to a variable:

> sudo yast sysconfig clear=POSTFIX_LISTEN
Tip
Tip: Variable in multiple files

If the variable is available in several files, use the VARIABLE_NAME$FILE_NAME syntax:

> sudo yast sysconfig clear=CONFIG_TYPE$/etc/sysconfig/mail
details

Displays detailed information about a variable:

> sudo yast sysconfig details variable=POSTFIX_LISTEN
Description:
Value:
File: /etc/sysconfig/postfix
Possible Values: Any value
Default Value:
Configuration Script: postfix
Description:
 Comma separated list of IP's
 NOTE: If not set, LISTEN on all interfaces
list

Displays summary of modified variables. Use all to list all variables and their values:

> sudo yast sysconfig list all
AOU_AUTO_AGREE_WITH_LICENSES="false"
AOU_ENABLE_CRONJOB="true"
AOU_INCLUDE_RECOMMENDS="false"
[...]
set

Sets a value for a variable:

> sudo yast sysconfig set DISPLAYMANAGER=gdm
Tip
Tip: Variable in multiple files

If the variable is available in several files, use the VARIABLE_NAME$FILE_NAME syntax:

> sudo yast sysconfig set CONFIG_TYPE$/etc/sysconfig/mail=advanced

4.4.3.25 yast tftp-server

Configures a TFTP server. yast tftp-server accepts the following commands:

directory

Specifies the directory of the TFTP server:

> sudo yast tftp-server directory path=/srv/tftp
> sudo yast tftp-server directory list
Directory Path: /srv/tftp
status

Controls the status of the TFTP server service:

> sudo yast tftp-server status disable
> sudo yast tftp-server status show
Service Status: false
> sudo yast tftp-server status enable

4.4.3.26 yast timezone

Configures the time zone. yast timezone accepts the following commands:

list

Lists all available time zones grouped by region:

> sudo yast timezone list
Region: Africa
Africa/Abidjan (Abidjan)
Africa/Accra (Accra)
Africa/Addis_Ababa (Addis Ababa)
[...]
set

Specifies new values for the time zone configuration:

> sudo yast timezone set timezone=Europe/Prague hwclock=local
summary

Displays the time zone configuration summary:

> sudo yast timezone summary
Current Time Zone: Europe/Prague
Hardware Clock Set To: Local time
Current Time and Date: Mon 12. March 2018, 11:36:21 CET

4.4.3.27 yast users

Manages user accounts. yast users accepts the following commands:

add

Adds a new user:

> sudo yast users add username=user1 password=secret home=/home/user1

For a complete list of options, run yast users add help.

delete

Deletes an existing user account:

> sudo yast users delete username=user1 delete_home

For a complete list of options, run yast users delete help.

edit

Changes an existing user account:

> sudo yast users edit username=user1 password=new_secret

For a complete list of options, run yast users edit help.

list

Lists existing users filtered by user type:

> sudo yast users list system

For a complete list of options, run yast users list help.

show

Displays details about a user:

> sudo yast users show username=wwwrun
Full Name: WWW daemon apache
List of Groups: www
Default Group: wwwrun
Home Directory: /var/lib/wwwrun
Login Shell: /sbin/nologin
Login Name: wwwrun
UID: 456

For a complete list of options, run yast users show help.