Jump to contentJump to page navigation: previous page [access key p]/next page [access key n]
documentation.suse.com / Documentation de SUSE Linux Enterprise Server / Administration Guide / Common tasks / User space live patching
Applies to SUSE Linux Enterprise Server 15 SP4

12 User space live patching

This chapter describes the basic principles and usage of user space live patching.

12.1 About user space live patching

User space live patching (ULP) refers to the process of applying patches to the libraries used by a running process without interrupting them. Every time a security fix is available as a live patch, customer services will be secured after applying the live patch without restarting the processes.

Live patching operations are performed using the ulp tool that is part of libpulp. libpulp is a framework that consists of the libpulp.so library and the ulp binary that makes libraries live patchable and applies live patches.

Tip
Tip

You can run the ulp command either as a normal user or a privileged user via the sudo mechanism. The difference is that running ulp via sudo lets you view information of processes or patch processes that are running by root.

12.1.1 Prerequisites

For ULP to work, two requirements must be met.

  • Install the ULP on your system by running:

    > sudo zypper in libpulp0 libpulp-tools
  • Applications with desired live patch support must be launched preloading the libpulp.so.0 library. See Section 12.1.3, “Using libpulp for more details.

12.1.2 Supported libraries

Currently, only glibc and openssl (openssl1_1) are supported. Additional packages will be available after they are prepared for live patching. To receive glibc and openssl live patches, install both glibc-livepatches and openssl-livepatches packages:

> zypper install glibc-livepatches openssl-livepatches

12.1.3 Using libpulp

To enable live patching on an application, you need to preload the libpulp.so.0 library when starting the application:

> LD_PRELOAD=/usr/lib64/libpulp.so.0 APPLICATION_CMD

12.1.3.1 Checking if a library is live patchable

To check whether a library is live patchable, use the following command:

> ulp livepatchable PATH_TO_LIBRARY

12.1.3.2 Checking if a .so file is a live patch container

A shared object (.so) is a live patch container if it contains the ULP patch description embedded into it. You can verify it with the following command:

> readelf -S SHARED_OBJECT | grep .ulp

If the output shows that there are both .ulp and .ulp.rev sections in the shared object, then it is a live patch container.

12.1.3.3 Applying live patches

Live patches are applied using the ulp trigger command, for example:

> ulp trigger -p PID LIVEPATCH.so

Replace PID with the process ID of the running process that uses the library to be patched and LIVEPATCH.so with the actual live patch file. The command returns one of the following status messages:

SUCCESS

The live patching operation was successful.

SKIPPED

The patch was skipped because it was not designed for any library that is loaded in the process.

ERROR

An error occurred, and you can retrieve more information by inspecting the libpulp internal message buffer. See Section 12.1.3.6, “View internal message queue” for more information.

It is also possible to apply multiple live patches by using wildcards, for example:

> ulp trigger '*.so'

The command tries to apply every patch in the current folder to every process that have the libpulp library loaded. If the patch is not suitable for the process, it is automatically skipped. In the end, the tool shows how many patches it successfully applied to how many processes.

12.1.3.4 Reverting live patches

You can use the ulp trigger command to revert live patches. There are two ways to revert live patches. You can revert a live patch by using the --revert switch and passing the live patch container:

> ulp trigger -p PID --revert LIVEPATCH.so

Alternatively, it is possible to remove all patches associated with a particular library, for example:

> ulp trigger -p PID --revert-all=LIBRARY

In the example, LIBRARY refers to the actual library, such as libcrypto.so.1.1.

The latter approach can be useful when the source code of the original live patch is not available. Or you want to remove a specific old patch and apply a new one while the target application is still running a secure code, for example:

> ulp trigger -p PID  --revert-all=libcrypto.so.1.1 new_livepatch2.so

12.1.3.5 View applied patches

It is possible to verify which applications have live patches applied by running:

> ulp patches

The output shows which libraries are live patchable and patches loaded in programs, as well which bugs the patch addresses:

PID: 10636, name: test
  Livepatchable libraries:
    in /lib64/libc.so.6:
      livepatch: libc_livepatch1.so
        bug labels: jsc#SLE-0000
    in /usr/lib64/libpulp.so.0:

It is also possible to see which functions are patched by the live patch:

> ulp dump LIVEPATCH.so

12.1.3.6 View internal message queue

Log messages from libpulp.so are stored in a buffer inside the library and are not displayed unless requested by the user. To show these messages, run:

> ulp messages -p PID

12.2 More information

Further information about libpulp is available in the project's Git repository.