CIS 1.7 Self Assessment Guide

Overview

This document is a companion to the K3s security hardening guide. The hardening guide provides prescriptive guidance for hardening a production installation of K3s, and this benchmark guide is meant to help you evaluate the level of security of the hardened cluster against each control in the CIS Kubernetes Benchmark. It is to be used by K3s operators, security teams, auditors, and decision-makers.

This guide is specific to the v1.25 release line of K3s and the v1.7.1 release of the CIS Kubernetes Benchmark.

For more information about each control, including detailed descriptions and remediations for failing tests, you can refer to the corresponding section of the CIS Kubernetes Benchmark v1.7.1. You can download the benchmark, after creating a free account, in Center for Internet Security (CIS).

Testing controls methodology

Each control in the CIS Kubernetes Benchmark was evaluated against a K3s cluster that was configured according to the accompanying hardening guide.

Where control audits differ from the original CIS benchmark, the audit commands specific to K3s are provided for testing.

These are the possible results for each control:

Pass - The K3s cluster under test passed the audit outlined in the benchmark.
Not Applicable - The control is not applicable to K3s because of how it is designed to operate. The remediation section will explain why this is so.
Warn - The control is manual in the CIS benchmark and it depends on the cluster’s use case or some other factor that must be determined by the cluster operator. These controls have been evaluated to ensure K3s does not prevent their implementation, but no further configuration or auditing of the cluster under test has been performed.

This guide makes the assumption that K3s is running as a Systemd unit. Your installation may vary and will require you to adjust the "audit" commands to fit your scenario.

Only scored test, also know as automated tests are covered in this guide.

1.1 Control Plane Node Configuration Files

1.1.1 Ensure that the API server pod specification file permissions are set to 600 or more restrictive (Automated)

Result: Not Applicable

Rationale:

By default, K3s embeds the api server within the k3s process. There is no API server pod specification file.

1.1.2 Ensure that the API server pod specification file ownership is set to root:root (Automated)

Result: Not Applicable

Rationale:

By default, K3s embeds the api server within the k3s process. There is no API server pod specification file.

1.1.3 Ensure that the controller manager pod specification file permissions are set to 600 or more restrictive (Automated)

Result: Not Applicable

Rationale:

By default, K3s embeds the controller manager within the k3s process. There is no controller manager pod specification file.

1.1.4 Ensure that the controller manager pod specification file ownership is set to root:root (Automated)

Result: Not Applicable

Rationale:

By default, K3s embeds the controller manager within the k3s process. There is no controller manager pod specification file.

1.1.5 Ensure that the scheduler pod specification file permissions are set to 600 or more restrictive (Automated)

Result: Not Applicable

Rationale:

By default, K3s embeds the scheduler within the k3s process. There is no scheduler pod specification file.

1.1.6 Ensure that the scheduler pod specification file ownership is set to root:root (Automated)

Result: Not Applicable

Rationale:

By default, K3s embeds the scheduler within the k3s process. There is no scheduler pod specification file.

1.1.7 Ensure that the etcd pod specification file permissions are set to 600 or more restrictive (Automated)

Result: Not Applicable

Rationale:

By default, K3s embeds etcd within the k3s process. There is no etcd pod specification file.

1.1.8 Ensure that the etcd pod specification file ownership is set to root:root (Automated)

Result: Not Applicable

Rationale:

By default, K3s embeds etcd within the k3s process. There is no etcd pod specification file.

1.1.9 Ensure that the Container Network Interface file permissions are set to 600 or more restrictive (Manual)

Result: WARN

Remediation: By default, K3s sets the CNI file permissions to 644. Note that for many CNIs, a lock file is created with permissions 750. This is expected and can be ignored. If you modify your CNI configuration, ensure that the permissions are set to 600. For example, chmod 600 /var/lib/cni/networks/<filename>

1.1.10 Ensure that the Container Network Interface file ownership is set to root:root (Automated)

Result: PASS

Audit:

ps -ef | grep containerd | grep -- --cni-conf-dir | sed 's%.*cni-conf-dir[= ]\([^ ]*\).*%\1%' | xargs -I{} find {} -mindepth 1 | xargs --no-run-if-empty stat -c %U:%G
find /var/lib/cni/networks -type f 2> /dev/null | xargs --no-run-if-empty stat -c %U:%G

Expected Result: 'root:root' is present

Returned Value:

root:root
root:root
root:root
root:root
root:root
root:root
root:root

Remediation:

Run the below command (based on the file location on your system) on the control plane node. For example, chown root:root <path/to/cni/files>

1.1.11 Ensure that the etcd data directory permissions are set to 700 or more restrictive (Automated)

Result: PASS

Audit:

if [ "$(journalctl -u k3s | grep -m1 'Managed etcd cluster' | wc -l)" -gt 0 ]; then
  stat -c permissions=%a /var/lib/rancher/k3s/server/db/etcd
else
  echo "permissions=700"
fi

Expected Result: permissions has permissions 700, expected 700 or more restrictive

Returned Value:

permissions=700

Remediation:

On the etcd server node, get the etcd data directory, passed as an argument --data-dir, from the command 'ps -ef | grep etcd'. Run the below command (based on the etcd data directory found above). For example, chmod 700 /var/lib/rancher/k3s/server/db/etcd

1.1.12 Ensure that the etcd data directory ownership is set to etcd:etcd (Automated)

Result: Not Applicable

Rationale:

For K3s, etcd is embedded within the k3s process. There is no separate etcd process. Therefore the etcd data directory ownership is managed by the k3s process and should be root:root.

1.1.13 Ensure that the admin.conf file permissions are set to 600 or more restrictive (Automated)

Result: PASS

Audit:

/bin/sh -c 'if test -e /var/lib/rancher/k3s/server/cred/admin.kubeconfig; then stat -c permissions=%a /var/lib/rancher/k3s/server/cred/admin.kubeconfig; fi'

Expected Result: permissions has permissions 600, expected 600 or more restrictive

Returned Value:

permissions=600

Remediation:

Run the below command (based on the file location on your system) on the control plane node. For example, chmod 600 /var/lib/rancher/k3s/server/cred/admin.kubeconfig

1.1.14 Ensure that the admin.conf file ownership is set to root:root (Automated)

Result: PASS

Audit:

/bin/sh -c 'if test -e /var/lib/rancher/k3s/server/cred/admin.kubeconfig; then stat -c %U:%G /var/lib/rancher/k3s/server/cred/admin.kubeconfig; fi'

Expected Result: 'root:root' is equal to 'root:root'

Returned Value:

root:root

Remediation:

Run the below command (based on the file location on your system) on the control plane node. For example, chown root:root /var/lib/rancher/k3s/server/cred/admin.kubeconfig

1.1.15 Ensure that the scheduler.conf file permissions are set to 600 or more restrictive (Automated)

Result: PASS

Audit:

/bin/sh -c 'if test -e /var/lib/rancher/k3s/server/cred/scheduler.kubeconfig; then stat -c permissions=%a /var/lib/rancher/k3s/server/cred/scheduler.kubeconfig; fi'

Expected Result: permissions has permissions 600, expected 600 or more restrictive

Returned Value:

permissions=600

Remediation:

Run the below command (based on the file location on your system) on the control plane node. For example, chmod 600 /var/lib/rancher/k3s/server/cred/scheduler.kubeconfig

1.1.16 Ensure that the scheduler.conf file ownership is set to root:root (Automated)

Result: PASS

Audit:

/bin/sh -c 'if test -e /var/lib/rancher/k3s/server/cred/scheduler.kubeconfig; then stat -c %U:%G /var/lib/rancher/k3s/server/cred/scheduler.kubeconfig; fi'

Expected Result: 'root:root' is present

Returned Value:

root:root

Remediation:

Run the below command (based on the file location on your system) on the control plane node. For example, chown root:root /var/lib/rancher/k3s/server/cred/scheduler.kubeconfig

1.1.17 Ensure that the controller-manager.conf file permissions are set to 600 or more restrictive (Automated)

Result: PASS

Audit:

/bin/sh -c 'if test -e /var/lib/rancher/k3s/server/cred/controller.kubeconfig; then stat -c permissions=%a /var/lib/rancher/k3s/server/cred/controller.kubeconfig; fi'

Expected Result: permissions has permissions 600, expected 600 or more restrictive

Returned Value:

permissions=600

Remediation:

Run the below command (based on the file location on your system) on the control plane node. For example, chmod 600 /var/lib/rancher/k3s/server/cred/controller.kubeconfig

1.1.18 Ensure that the controller-manager.conf file ownership is set to root:root (Automated)

Result: PASS

Audit:

stat -c %U:%G /var/lib/rancher/k3s/server/cred/controller.kubeconfig

Expected Result: 'root:root' is equal to 'root:root'

Returned Value:

root:root

Remediation:

Run the below command (based on the file location on your system) on the control plane node. For example, chown root:root /var/lib/rancher/k3s/server/cred/controller.kubeconfig

1.1.19 Ensure that the Kubernetes PKI directory and file ownership is set to root:root (Automated)

Result: PASS

Audit:

stat -c %U:%G /var/lib/rancher/k3s/server/tls

Expected Result: 'root:root' is present

Returned Value:

root:root

Remediation:

Run the below command (based on the file location on your system) on the control plane node. For example, chown -R root:root /var/lib/rancher/k3s/server/tls

1.1.20 Ensure that the Kubernetes PKI certificate file permissions are set to 600 or more restrictive (Manual)

Result: WARN

Remediation: Run the below command (based on the file location on your system) on the master node. For example, chmod -R 600 /var/lib/rancher/k3s/server/tls/*.crt

1.1.21 Ensure that the Kubernetes PKI key file permissions are set to 600 (Automated)

Result: PASS

Audit:

/bin/sh -c 'stat -c permissions=%a /var/lib/rancher/k3s/server/tls/*.key'

Expected Result: permissions has permissions 600, expected 600 or more restrictive

Returned Value:

permissions=600
permissions=600
permissions=600
permissions=600
permissions=600
permissions=600
permissions=600
permissions=600
permissions=600
permissions=600
permissions=600
permissions=600
permissions=600
permissions=600
permissions=600
permissions=600
permissions=600

Remediation:

Run the below command (based on the file location on your system) on the master node. For example, chmod -R 600 /var/lib/rancher/k3s/server/tls/*.key

1.2 API Server

1.2.1 Ensure that the --anonymous-auth argument is set to false (Automated)

Result: PASS

Audit:

journalctl -u k3s | grep 'Running kube-apiserver' | tail -n1 | grep 'anonymous-auth'

Expected Result: '--anonymous-auth' is equal to 'false'

Returned Value:

Aug 09 19:01:28 server-0 k3s[2354]: time="2024-08-09T19:01:28Z" level=info msg="Running kube-apiserver --admission-control-config-file=/var/lib/rancher/k3s/server/psa.yaml --advertise-address=10.10.10.100 --advertise-port=6443 --allow-privileged=true --anonymous-auth=false --api-audiences=https://kubernetes.default.svc.cluster.local,k3s --audit-log-maxage=30 --audit-log-maxbackup=10 --audit-log-maxsize=100 --audit-log-path=/var/lib/rancher/k3s/server/logs/audit.log --audit-policy-file=/var/lib/rancher/k3s/server/audit.yaml --authorization-mode=Node,RBAC --bind-address=127.0.0.1 --cert-dir=/var/lib/rancher/k3s/server/tls/temporary-certs --client-ca-file=/var/lib/rancher/k3s/server/tls/client-ca.crt --egress-selector-config-file=/var/lib/rancher/k3s/server/etc/egress-selector-config.yaml --enable-admission-plugins=NodeRestriction --enable-aggregator-routing=true --enable-bootstrap-token-auth=true --encryption-provider-config=/var/lib/rancher/k3s/server/cred/encryption-config.json --etcd-cafile=/var/lib/rancher/k3s/server/tls/etcd/server-ca.crt --etcd-certfile=/var/lib/rancher/k3s/server/tls/etcd/client.crt --etcd-keyfile=/var/lib/rancher/k3s/server/tls/etcd/client.key --etcd-servers=https://127.0.0.1:2379 --feature-gates=JobTrackingWithFinalizers=true --kubelet-certificate-authority=/var/lib/rancher/k3s/server/tls/server-ca.crt --kubelet-client-certificate=/var/lib/rancher/k3s/server/tls/client-kube-apiserver.crt --kubelet-client-key=/var/lib/rancher/k3s/server/tls/client-kube-apiserver.key --kubelet-preferred-address-types=InternalIP,ExternalIP,Hostname --profiling=false --proxy-client-cert-file=/var/lib/rancher/k3s/server/tls/client-auth-proxy.crt --proxy-client-key-file=/var/lib/rancher/k3s/server/tls/client-auth-proxy.key --requestheader-allowed-names=system:auth-proxy --requestheader-client-ca-file=/var/lib/rancher/k3s/server/tls/request-header-ca.crt --requestheader-extra-headers-prefix=X-Remote-Extra- --requestheader-group-headers=X-Remote-Group --requestheader-username-headers=X-Remote-User --secure-port=6444 --service-account-issuer=https://kubernetes.default.svc.cluster.local --service-account-key-file=/var/lib/rancher/k3s/server/tls/service.key --service-account-signing-key-file=/var/lib/rancher/k3s/server/tls/service.current.key --service-cluster-ip-range=10.43.0.0/16 --service-node-port-range=30000-32767 --storage-backend=etcd3 --tls-cert-file=/var/lib/rancher/k3s/server/tls/serving-kube-apiserver.crt --tls-cipher-suites=TLS_ECDHE_ECDSA_WITH_AES_256_GCM_SHA384,TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384,TLS_ECDHE_ECDSA_WITH_AES_128_GCM_SHA256,TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256,TLS_ECDHE_ECDSA_WITH_CHACHA20_POLY1305,TLS_ECDHE_RSA_WITH_CHACHA20_POLY1305 --tls-private-key-file=/var/lib/rancher/k3s/server/tls/serving-kube-apiserver.key"

Remediation:

By default, K3s sets the --anonymous-auth argument to false. If it is set to true, edit the K3s config file /etc/rancher/k3s/config.yaml and remove anything similar to below.

kube-apiserver-arg:
  - "anonymous-auth=true"

1.2.2 Ensure that the --token-auth-file parameter is not set (Automated)

Result: PASS

Audit:

journalctl -u k3s | grep 'Running kube-apiserver' | tail -n1

Expected Result: '--token-auth-file' is not present

Returned Value:

Aug 09 19:01:28 server-0 k3s[2354]: time="2024-08-09T19:01:28Z" level=info msg="Running kube-apiserver --admission-control-config-file=/var/lib/rancher/k3s/server/psa.yaml --advertise-address=10.10.10.100 --advertise-port=6443 --allow-privileged=true --anonymous-auth=false --api-audiences=https://kubernetes.default.svc.cluster.local,k3s --audit-log-maxage=30 --audit-log-maxbackup=10 --audit-log-maxsize=100 --audit-log-path=/var/lib/rancher/k3s/server/logs/audit.log --audit-policy-file=/var/lib/rancher/k3s/server/audit.yaml --authorization-mode=Node,RBAC --bind-address=127.0.0.1 --cert-dir=/var/lib/rancher/k3s/server/tls/temporary-certs --client-ca-file=/var/lib/rancher/k3s/server/tls/client-ca.crt --egress-selector-config-file=/var/lib/rancher/k3s/server/etc/egress-selector-config.yaml --enable-admission-plugins=NodeRestriction --enable-aggregator-routing=true --enable-bootstrap-token-auth=true --encryption-provider-config=/var/lib/rancher/k3s/server/cred/encryption-config.json --etcd-cafile=/var/lib/rancher/k3s/server/tls/etcd/server-ca.crt --etcd-certfile=/var/lib/rancher/k3s/server/tls/etcd/client.crt --etcd-keyfile=/var/lib/rancher/k3s/server/tls/etcd/client.key --etcd-servers=https://127.0.0.1:2379 --feature-gates=JobTrackingWithFinalizers=true --kubelet-certificate-authority=/var/lib/rancher/k3s/server/tls/server-ca.crt --kubelet-client-certificate=/var/lib/rancher/k3s/server/tls/client-kube-apiserver.crt --kubelet-client-key=/var/lib/rancher/k3s/server/tls/client-kube-apiserver.key --kubelet-preferred-address-types=InternalIP,ExternalIP,Hostname --profiling=false --proxy-client-cert-file=/var/lib/rancher/k3s/server/tls/client-auth-proxy.crt --proxy-client-key-file=/var/lib/rancher/k3s/server/tls/client-auth-proxy.key --requestheader-allowed-names=system:auth-proxy --requestheader-client-ca-file=/var/lib/rancher/k3s/server/tls/request-header-ca.crt --requestheader-extra-headers-prefix=X-Remote-Extra- --requestheader-group-headers=X-Remote-Group --requestheader-username-headers=X-Remote-User --secure-port=6444 --service-account-issuer=https://kubernetes.default.svc.cluster.local --service-account-key-file=/var/lib/rancher/k3s/server/tls/service.key --service-account-signing-key-file=/var/lib/rancher/k3s/server/tls/service.current.key --service-cluster-ip-range=10.43.0.0/16 --service-node-port-range=30000-32767 --storage-backend=etcd3 --tls-cert-file=/var/lib/rancher/k3s/server/tls/serving-kube-apiserver.crt --tls-cipher-suites=TLS_ECDHE_ECDSA_WITH_AES_256_GCM_SHA384,TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384,TLS_ECDHE_ECDSA_WITH_AES_128_GCM_SHA256,TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256,TLS_ECDHE_ECDSA_WITH_CHACHA20_POLY1305,TLS_ECDHE_RSA_WITH_CHACHA20_POLY1305 --tls-private-key-file=/var/lib/rancher/k3s/server/tls/serving-kube-apiserver.key"

Remediation:

Follow the documentation and configure alternate mechanisms for authentication. If this check fails, edit the K3s config file /etc/rancher/k3s/config.yaml and remove anything similar to below.

kube-apiserver-arg:
  - "token-auth-file=<path>"

1.2.3 Ensure that the --DenyServiceExternalIPs is not set (Automated)

Result: PASS

Audit:

journalctl -u k3s | grep 'Running kube-apiserver' | tail -n1

Expected Result: '--enable-admission-plugins' does not have 'DenyServiceExternalIPs' OR '--enable-admission-plugins' is not present

Returned Value:

Aug 09 19:01:28 server-0 k3s[2354]: time="2024-08-09T19:01:28Z" level=info msg="Running kube-apiserver --admission-control-config-file=/var/lib/rancher/k3s/server/psa.yaml --advertise-address=10.10.10.100 --advertise-port=6443 --allow-privileged=true --anonymous-auth=false --api-audiences=https://kubernetes.default.svc.cluster.local,k3s --audit-log-maxage=30 --audit-log-maxbackup=10 --audit-log-maxsize=100 --audit-log-path=/var/lib/rancher/k3s/server/logs/audit.log --audit-policy-file=/var/lib/rancher/k3s/server/audit.yaml --authorization-mode=Node,RBAC --bind-address=127.0.0.1 --cert-dir=/var/lib/rancher/k3s/server/tls/temporary-certs --client-ca-file=/var/lib/rancher/k3s/server/tls/client-ca.crt --egress-selector-config-file=/var/lib/rancher/k3s/server/etc/egress-selector-config.yaml --enable-admission-plugins=NodeRestriction --enable-aggregator-routing=true --enable-bootstrap-token-auth=true --encryption-provider-config=/var/lib/rancher/k3s/server/cred/encryption-config.json --etcd-cafile=/var/lib/rancher/k3s/server/tls/etcd/server-ca.crt --etcd-certfile=/var/lib/rancher/k3s/server/tls/etcd/client.crt --etcd-keyfile=/var/lib/rancher/k3s/server/tls/etcd/client.key --etcd-servers=https://127.0.0.1:2379 --feature-gates=JobTrackingWithFinalizers=true --kubelet-certificate-authority=/var/lib/rancher/k3s/server/tls/server-ca.crt --kubelet-client-certificate=/var/lib/rancher/k3s/server/tls/client-kube-apiserver.crt --kubelet-client-key=/var/lib/rancher/k3s/server/tls/client-kube-apiserver.key --kubelet-preferred-address-types=InternalIP,ExternalIP,Hostname --profiling=false --proxy-client-cert-file=/var/lib/rancher/k3s/server/tls/client-auth-proxy.crt --proxy-client-key-file=/var/lib/rancher/k3s/server/tls/client-auth-proxy.key --requestheader-allowed-names=system:auth-proxy --requestheader-client-ca-file=/var/lib/rancher/k3s/server/tls/request-header-ca.crt --requestheader-extra-headers-prefix=X-Remote-Extra- --requestheader-group-headers=X-Remote-Group --requestheader-username-headers=X-Remote-User --secure-port=6444 --service-account-issuer=https://kubernetes.default.svc.cluster.local --service-account-key-file=/var/lib/rancher/k3s/server/tls/service.key --service-account-signing-key-file=/var/lib/rancher/k3s/server/tls/service.current.key --service-cluster-ip-range=10.43.0.0/16 --service-node-port-range=30000-32767 --storage-backend=etcd3 --tls-cert-file=/var/lib/rancher/k3s/server/tls/serving-kube-apiserver.crt --tls-cipher-suites=TLS_ECDHE_ECDSA_WITH_AES_256_GCM_SHA384,TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384,TLS_ECDHE_ECDSA_WITH_AES_128_GCM_SHA256,TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256,TLS_ECDHE_ECDSA_WITH_CHACHA20_POLY1305,TLS_ECDHE_RSA_WITH_CHACHA20_POLY1305 --tls-private-key-file=/var/lib/rancher/k3s/server/tls/serving-kube-apiserver.key"

Remediation:

By default, K3s does not set DenyServiceExternalIPs. If this check fails, edit the K3s config file /etc/rancher/k3s/config.yaml, remove any lines like below.

kube-apiserver-arg:
  - "enable-admission-plugins=DenyServiceExternalIPs"

1.2.4 Ensure that the --kubelet-client-certificate and --kubelet-client-key arguments are set as appropriate (Automated)

Result: PASS

Audit:

journalctl -u k3s | grep 'Running kube-apiserver' | tail -n1 | grep 'kubelet-certificate-authority'

Expected Result: '--kubelet-client-certificate' is present AND '--kubelet-client-key' is present

Returned Value:

Aug 09 19:01:28 server-0 k3s[2354]: time="2024-08-09T19:01:28Z" level=info msg="Running kube-apiserver --admission-control-config-file=/var/lib/rancher/k3s/server/psa.yaml --advertise-address=10.10.10.100 --advertise-port=6443 --allow-privileged=true --anonymous-auth=false --api-audiences=https://kubernetes.default.svc.cluster.local,k3s --audit-log-maxage=30 --audit-log-maxbackup=10 --audit-log-maxsize=100 --audit-log-path=/var/lib/rancher/k3s/server/logs/audit.log --audit-policy-file=/var/lib/rancher/k3s/server/audit.yaml --authorization-mode=Node,RBAC --bind-address=127.0.0.1 --cert-dir=/var/lib/rancher/k3s/server/tls/temporary-certs --client-ca-file=/var/lib/rancher/k3s/server/tls/client-ca.crt --egress-selector-config-file=/var/lib/rancher/k3s/server/etc/egress-selector-config.yaml --enable-admission-plugins=NodeRestriction --enable-aggregator-routing=true --enable-bootstrap-token-auth=true --encryption-provider-config=/var/lib/rancher/k3s/server/cred/encryption-config.json --etcd-cafile=/var/lib/rancher/k3s/server/tls/etcd/server-ca.crt --etcd-certfile=/var/lib/rancher/k3s/server/tls/etcd/client.crt --etcd-keyfile=/var/lib/rancher/k3s/server/tls/etcd/client.key --etcd-servers=https://127.0.0.1:2379 --feature-gates=JobTrackingWithFinalizers=true --kubelet-certificate-authority=/var/lib/rancher/k3s/server/tls/server-ca.crt --kubelet-client-certificate=/var/lib/rancher/k3s/server/tls/client-kube-apiserver.crt --kubelet-client-key=/var/lib/rancher/k3s/server/tls/client-kube-apiserver.key --kubelet-preferred-address-types=InternalIP,ExternalIP,Hostname --profiling=false --proxy-client-cert-file=/var/lib/rancher/k3s/server/tls/client-auth-proxy.crt --proxy-client-key-file=/var/lib/rancher/k3s/server/tls/client-auth-proxy.key --requestheader-allowed-names=system:auth-proxy --requestheader-client-ca-file=/var/lib/rancher/k3s/server/tls/request-header-ca.crt --requestheader-extra-headers-prefix=X-Remote-Extra- --requestheader-group-headers=X-Remote-Group --requestheader-username-headers=X-Remote-User --secure-port=6444 --service-account-issuer=https://kubernetes.default.svc.cluster.local --service-account-key-file=/var/lib/rancher/k3s/server/tls/service.key --service-account-signing-key-file=/var/lib/rancher/k3s/server/tls/service.current.key --service-cluster-ip-range=10.43.0.0/16 --service-node-port-range=30000-32767 --storage-backend=etcd3 --tls-cert-file=/var/lib/rancher/k3s/server/tls/serving-kube-apiserver.crt --tls-cipher-suites=TLS_ECDHE_ECDSA_WITH_AES_256_GCM_SHA384,TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384,TLS_ECDHE_ECDSA_WITH_AES_128_GCM_SHA256,TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256,TLS_ECDHE_ECDSA_WITH_CHACHA20_POLY1305,TLS_ECDHE_RSA_WITH_CHACHA20_POLY1305 --tls-private-key-file=/var/lib/rancher/k3s/server/tls/serving-kube-apiserver.key"

Remediation:

By default, K3s automatically provides the kubelet client certificate and key. They are generated and located at /var/lib/rancher/k3s/server/tls/client-kube-apiserver.crt and /var/lib/rancher/k3s/server/tls/client-kube-apiserver.key If for some reason you need to provide your own certificate and key, you can set the below parameters in the K3s config file /etc/rancher/k3s/config.yaml.

kube-apiserver-arg:
  - "kubelet-client-certificate=<path/to/client-cert-file>"
  - "kubelet-client-key=<path/to/client-key-file>"

1.2.5 Ensure that the --kubelet-certificate-authority argument is set as appropriate (Automated)

Result: PASS

Audit:

journalctl -u k3s | grep 'Running kube-apiserver' | tail -n1 | grep 'kubelet-certificate-authority'

Expected Result: '--kubelet-certificate-authority' is present

Returned Value:

Aug 09 19:01:28 server-0 k3s[2354]: time="2024-08-09T19:01:28Z" level=info msg="Running kube-apiserver --admission-control-config-file=/var/lib/rancher/k3s/server/psa.yaml --advertise-address=10.10.10.100 --advertise-port=6443 --allow-privileged=true --anonymous-auth=false --api-audiences=https://kubernetes.default.svc.cluster.local,k3s --audit-log-maxage=30 --audit-log-maxbackup=10 --audit-log-maxsize=100 --audit-log-path=/var/lib/rancher/k3s/server/logs/audit.log --audit-policy-file=/var/lib/rancher/k3s/server/audit.yaml --authorization-mode=Node,RBAC --bind-address=127.0.0.1 --cert-dir=/var/lib/rancher/k3s/server/tls/temporary-certs --client-ca-file=/var/lib/rancher/k3s/server/tls/client-ca.crt --egress-selector-config-file=/var/lib/rancher/k3s/server/etc/egress-selector-config.yaml --enable-admission-plugins=NodeRestriction --enable-aggregator-routing=true --enable-bootstrap-token-auth=true --encryption-provider-config=/var/lib/rancher/k3s/server/cred/encryption-config.json --etcd-cafile=/var/lib/rancher/k3s/server/tls/etcd/server-ca.crt --etcd-certfile=/var/lib/rancher/k3s/server/tls/etcd/client.crt --etcd-keyfile=/var/lib/rancher/k3s/server/tls/etcd/client.key --etcd-servers=https://127.0.0.1:2379 --feature-gates=JobTrackingWithFinalizers=true --kubelet-certificate-authority=/var/lib/rancher/k3s/server/tls/server-ca.crt --kubelet-client-certificate=/var/lib/rancher/k3s/server/tls/client-kube-apiserver.crt --kubelet-client-key=/var/lib/rancher/k3s/server/tls/client-kube-apiserver.key --kubelet-preferred-address-types=InternalIP,ExternalIP,Hostname --profiling=false --proxy-client-cert-file=/var/lib/rancher/k3s/server/tls/client-auth-proxy.crt --proxy-client-key-file=/var/lib/rancher/k3s/server/tls/client-auth-proxy.key --requestheader-allowed-names=system:auth-proxy --requestheader-client-ca-file=/var/lib/rancher/k3s/server/tls/request-header-ca.crt --requestheader-extra-headers-prefix=X-Remote-Extra- --requestheader-group-headers=X-Remote-Group --requestheader-username-headers=X-Remote-User --secure-port=6444 --service-account-issuer=https://kubernetes.default.svc.cluster.local --service-account-key-file=/var/lib/rancher/k3s/server/tls/service.key --service-account-signing-key-file=/var/lib/rancher/k3s/server/tls/service.current.key --service-cluster-ip-range=10.43.0.0/16 --service-node-port-range=30000-32767 --storage-backend=etcd3 --tls-cert-file=/var/lib/rancher/k3s/server/tls/serving-kube-apiserver.crt --tls-cipher-suites=TLS_ECDHE_ECDSA_WITH_AES_256_GCM_SHA384,TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384,TLS_ECDHE_ECDSA_WITH_AES_128_GCM_SHA256,TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256,TLS_ECDHE_ECDSA_WITH_CHACHA20_POLY1305,TLS_ECDHE_RSA_WITH_CHACHA20_POLY1305 --tls-private-key-file=/var/lib/rancher/k3s/server/tls/serving-kube-apiserver.key"

Remediation:

By default, K3s automatically provides the kubelet CA cert file, at /var/lib/rancher/k3s/server/tls/server-ca.crt. If this check fails, edit the K3s config file /etc/rancher/k3s/config.yaml and remove any lines like below.

kube-apiserver-arg:
  - "kubelet-certificate-authority=<path/to/ca-cert-file>"

1.2.6 Ensure that the --authorization-mode argument is not set to AlwaysAllow (Automated)

Result: PASS

Audit:

journalctl -u k3s | grep 'Running kube-apiserver' | tail -n1 | grep 'authorization-mode'

Expected Result: '--authorization-mode' does not have 'AlwaysAllow'

Returned Value:

Aug 09 19:01:28 server-0 k3s[2354]: time="2024-08-09T19:01:28Z" level=info msg="Running kube-apiserver --admission-control-config-file=/var/lib/rancher/k3s/server/psa.yaml --advertise-address=10.10.10.100 --advertise-port=6443 --allow-privileged=true --anonymous-auth=false --api-audiences=https://kubernetes.default.svc.cluster.local,k3s --audit-log-maxage=30 --audit-log-maxbackup=10 --audit-log-maxsize=100 --audit-log-path=/var/lib/rancher/k3s/server/logs/audit.log --audit-policy-file=/var/lib/rancher/k3s/server/audit.yaml --authorization-mode=Node,RBAC --bind-address=127.0.0.1 --cert-dir=/var/lib/rancher/k3s/server/tls/temporary-certs --client-ca-file=/var/lib/rancher/k3s/server/tls/client-ca.crt --egress-selector-config-file=/var/lib/rancher/k3s/server/etc/egress-selector-config.yaml --enable-admission-plugins=NodeRestriction --enable-aggregator-routing=true --enable-bootstrap-token-auth=true --encryption-provider-config=/var/lib/rancher/k3s/server/cred/encryption-config.json --etcd-cafile=/var/lib/rancher/k3s/server/tls/etcd/server-ca.crt --etcd-certfile=/var/lib/rancher/k3s/server/tls/etcd/client.crt --etcd-keyfile=/var/lib/rancher/k3s/server/tls/etcd/client.key --etcd-servers=https://127.0.0.1:2379 --feature-gates=JobTrackingWithFinalizers=true --kubelet-certificate-authority=/var/lib/rancher/k3s/server/tls/server-ca.crt --kubelet-client-certificate=/var/lib/rancher/k3s/server/tls/client-kube-apiserver.crt --kubelet-client-key=/var/lib/rancher/k3s/server/tls/client-kube-apiserver.key --kubelet-preferred-address-types=InternalIP,ExternalIP,Hostname --profiling=false --proxy-client-cert-file=/var/lib/rancher/k3s/server/tls/client-auth-proxy.crt --proxy-client-key-file=/var/lib/rancher/k3s/server/tls/client-auth-proxy.key --requestheader-allowed-names=system:auth-proxy --requestheader-client-ca-file=/var/lib/rancher/k3s/server/tls/request-header-ca.crt --requestheader-extra-headers-prefix=X-Remote-Extra- --requestheader-group-headers=X-Remote-Group --requestheader-username-headers=X-Remote-User --secure-port=6444 --service-account-issuer=https://kubernetes.default.svc.cluster.local --service-account-key-file=/var/lib/rancher/k3s/server/tls/service.key --service-account-signing-key-file=/var/lib/rancher/k3s/server/tls/service.current.key --service-cluster-ip-range=10.43.0.0/16 --service-node-port-range=30000-32767 --storage-backend=etcd3 --tls-cert-file=/var/lib/rancher/k3s/server/tls/serving-kube-apiserver.crt --tls-cipher-suites=TLS_ECDHE_ECDSA_WITH_AES_256_GCM_SHA384,TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384,TLS_ECDHE_ECDSA_WITH_AES_128_GCM_SHA256,TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256,TLS_ECDHE_ECDSA_WITH_CHACHA20_POLY1305,TLS_ECDHE_RSA_WITH_CHACHA20_POLY1305 --tls-private-key-file=/var/lib/rancher/k3s/server/tls/serving-kube-apiserver.key"

Remediation:

By default, K3s does not set the --authorization-mode to AlwaysAllow. If this check fails, edit K3s config file /etc/rancher/k3s/config.yaml, remove any lines like below.

kube-apiserver-arg:
  - "authorization-mode=AlwaysAllow"

1.2.7 Ensure that the --authorization-mode argument includes Node (Automated)

Result: PASS

Audit:

journalctl -u k3s | grep 'Running kube-apiserver' | tail -n1 | grep 'authorization-mode'

Expected Result: '--authorization-mode' has 'Node'

Returned Value:

Aug 09 19:01:28 server-0 k3s[2354]: time="2024-08-09T19:01:28Z" level=info msg="Running kube-apiserver --admission-control-config-file=/var/lib/rancher/k3s/server/psa.yaml --advertise-address=10.10.10.100 --advertise-port=6443 --allow-privileged=true --anonymous-auth=false --api-audiences=https://kubernetes.default.svc.cluster.local,k3s --audit-log-maxage=30 --audit-log-maxbackup=10 --audit-log-maxsize=100 --audit-log-path=/var/lib/rancher/k3s/server/logs/audit.log --audit-policy-file=/var/lib/rancher/k3s/server/audit.yaml --authorization-mode=Node,RBAC --bind-address=127.0.0.1 --cert-dir=/var/lib/rancher/k3s/server/tls/temporary-certs --client-ca-file=/var/lib/rancher/k3s/server/tls/client-ca.crt --egress-selector-config-file=/var/lib/rancher/k3s/server/etc/egress-selector-config.yaml --enable-admission-plugins=NodeRestriction --enable-aggregator-routing=true --enable-bootstrap-token-auth=true --encryption-provider-config=/var/lib/rancher/k3s/server/cred/encryption-config.json --etcd-cafile=/var/lib/rancher/k3s/server/tls/etcd/server-ca.crt --etcd-certfile=/var/lib/rancher/k3s/server/tls/etcd/client.crt --etcd-keyfile=/var/lib/rancher/k3s/server/tls/etcd/client.key --etcd-servers=https://127.0.0.1:2379 --feature-gates=JobTrackingWithFinalizers=true --kubelet-certificate-authority=/var/lib/rancher/k3s/server/tls/server-ca.crt --kubelet-client-certificate=/var/lib/rancher/k3s/server/tls/client-kube-apiserver.crt --kubelet-client-key=/var/lib/rancher/k3s/server/tls/client-kube-apiserver.key --kubelet-preferred-address-types=InternalIP,ExternalIP,Hostname --profiling=false --proxy-client-cert-file=/var/lib/rancher/k3s/server/tls/client-auth-proxy.crt --proxy-client-key-file=/var/lib/rancher/k3s/server/tls/client-auth-proxy.key --requestheader-allowed-names=system:auth-proxy --requestheader-client-ca-file=/var/lib/rancher/k3s/server/tls/request-header-ca.crt --requestheader-extra-headers-prefix=X-Remote-Extra- --requestheader-group-headers=X-Remote-Group --requestheader-username-headers=X-Remote-User --secure-port=6444 --service-account-issuer=https://kubernetes.default.svc.cluster.local --service-account-key-file=/var/lib/rancher/k3s/server/tls/service.key --service-account-signing-key-file=/var/lib/rancher/k3s/server/tls/service.current.key --service-cluster-ip-range=10.43.0.0/16 --service-node-port-range=30000-32767 --storage-backend=etcd3 --tls-cert-file=/var/lib/rancher/k3s/server/tls/serving-kube-apiserver.crt --tls-cipher-suites=TLS_ECDHE_ECDSA_WITH_AES_256_GCM_SHA384,TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384,TLS_ECDHE_ECDSA_WITH_AES_128_GCM_SHA256,TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256,TLS_ECDHE_ECDSA_WITH_CHACHA20_POLY1305,TLS_ECDHE_RSA_WITH_CHACHA20_POLY1305 --tls-private-key-file=/var/lib/rancher/k3s/server/tls/serving-kube-apiserver.key"

Remediation:

By default, K3s sets the --authorization-mode to Node and RBAC. If this check fails, edit the K3s config file /etc/rancher/k3s/config.yaml, ensure that you are not overriding authorization-mode.

1.2.8 Ensure that the --authorization-mode argument includes RBAC (Automated)

Result: PASS

Audit:

journalctl -u k3s | grep 'Running kube-apiserver' | tail -n1 | grep 'authorization-mode'

Expected Result: '--authorization-mode' has 'RBAC'

Returned Value:

Aug 09 19:01:28 server-0 k3s[2354]: time="2024-08-09T19:01:28Z" level=info msg="Running kube-apiserver --admission-control-config-file=/var/lib/rancher/k3s/server/psa.yaml --advertise-address=10.10.10.100 --advertise-port=6443 --allow-privileged=true --anonymous-auth=false --api-audiences=https://kubernetes.default.svc.cluster.local,k3s --audit-log-maxage=30 --audit-log-maxbackup=10 --audit-log-maxsize=100 --audit-log-path=/var/lib/rancher/k3s/server/logs/audit.log --audit-policy-file=/var/lib/rancher/k3s/server/audit.yaml --authorization-mode=Node,RBAC --bind-address=127.0.0.1 --cert-dir=/var/lib/rancher/k3s/server/tls/temporary-certs --client-ca-file=/var/lib/rancher/k3s/server/tls/client-ca.crt --egress-selector-config-file=/var/lib/rancher/k3s/server/etc/egress-selector-config.yaml --enable-admission-plugins=NodeRestriction --enable-aggregator-routing=true --enable-bootstrap-token-auth=true --encryption-provider-config=/var/lib/rancher/k3s/server/cred/encryption-config.json --etcd-cafile=/var/lib/rancher/k3s/server/tls/etcd/server-ca.crt --etcd-certfile=/var/lib/rancher/k3s/server/tls/etcd/client.crt --etcd-keyfile=/var/lib/rancher/k3s/server/tls/etcd/client.key --etcd-servers=https://127.0.0.1:2379 --feature-gates=JobTrackingWithFinalizers=true --kubelet-certificate-authority=/var/lib/rancher/k3s/server/tls/server-ca.crt --kubelet-client-certificate=/var/lib/rancher/k3s/server/tls/client-kube-apiserver.crt --kubelet-client-key=/var/lib/rancher/k3s/server/tls/client-kube-apiserver.key --kubelet-preferred-address-types=InternalIP,ExternalIP,Hostname --profiling=false --proxy-client-cert-file=/var/lib/rancher/k3s/server/tls/client-auth-proxy.crt --proxy-client-key-file=/var/lib/rancher/k3s/server/tls/client-auth-proxy.key --requestheader-allowed-names=system:auth-proxy --requestheader-client-ca-file=/var/lib/rancher/k3s/server/tls/request-header-ca.crt --requestheader-extra-headers-prefix=X-Remote-Extra- --requestheader-group-headers=X-Remote-Group --requestheader-username-headers=X-Remote-User --secure-port=6444 --service-account-issuer=https://kubernetes.default.svc.cluster.local --service-account-key-file=/var/lib/rancher/k3s/server/tls/service.key --service-account-signing-key-file=/var/lib/rancher/k3s/server/tls/service.current.key --service-cluster-ip-range=10.43.0.0/16 --service-node-port-range=30000-32767 --storage-backend=etcd3 --tls-cert-file=/var/lib/rancher/k3s/server/tls/serving-kube-apiserver.crt --tls-cipher-suites=TLS_ECDHE_ECDSA_WITH_AES_256_GCM_SHA384,TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384,TLS_ECDHE_ECDSA_WITH_AES_128_GCM_SHA256,TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256,TLS_ECDHE_ECDSA_WITH_CHACHA20_POLY1305,TLS_ECDHE_RSA_WITH_CHACHA20_POLY1305 --tls-private-key-file=/var/lib/rancher/k3s/server/tls/serving-kube-apiserver.key"

Remediation:

By default, K3s sets the --authorization-mode to Node and RBAC. If this check fails, edit the K3s config file /etc/rancher/k3s/config.yaml, ensure that you are not overriding authorization-mode.

1.2.9 Ensure that the admission control plugin EventRateLimit is set (Manual)

Result: WARN

Remediation: Follow the Kubernetes documentation and set the desired limits in a configuration file. Then, edit the K3s config file /etc/rancher/k3s/config.yaml and set the below parameters.

kube-apiserver-arg:
  - "enable-admission-plugins=...,EventRateLimit,..."
  - "admission-control-config-file=<path/to/configuration/file>"

1.2.10 Ensure that the admission control plugin AlwaysAdmit is not set (Automated)

Result: PASS

Audit:

journalctl -u k3s | grep 'Running kube-apiserver' | tail -n1 | grep 'enable-admission-plugins'

Expected Result: '--enable-admission-plugins' does not have 'AlwaysAdmit' OR '--enable-admission-plugins' is not present

Returned Value:

Aug 09 19:01:28 server-0 k3s[2354]: time="2024-08-09T19:01:28Z" level=info msg="Running kube-apiserver --admission-control-config-file=/var/lib/rancher/k3s/server/psa.yaml --advertise-address=10.10.10.100 --advertise-port=6443 --allow-privileged=true --anonymous-auth=false --api-audiences=https://kubernetes.default.svc.cluster.local,k3s --audit-log-maxage=30 --audit-log-maxbackup=10 --audit-log-maxsize=100 --audit-log-path=/var/lib/rancher/k3s/server/logs/audit.log --audit-policy-file=/var/lib/rancher/k3s/server/audit.yaml --authorization-mode=Node,RBAC --bind-address=127.0.0.1 --cert-dir=/var/lib/rancher/k3s/server/tls/temporary-certs --client-ca-file=/var/lib/rancher/k3s/server/tls/client-ca.crt --egress-selector-config-file=/var/lib/rancher/k3s/server/etc/egress-selector-config.yaml --enable-admission-plugins=NodeRestriction --enable-aggregator-routing=true --enable-bootstrap-token-auth=true --encryption-provider-config=/var/lib/rancher/k3s/server/cred/encryption-config.json --etcd-cafile=/var/lib/rancher/k3s/server/tls/etcd/server-ca.crt --etcd-certfile=/var/lib/rancher/k3s/server/tls/etcd/client.crt --etcd-keyfile=/var/lib/rancher/k3s/server/tls/etcd/client.key --etcd-servers=https://127.0.0.1:2379 --feature-gates=JobTrackingWithFinalizers=true --kubelet-certificate-authority=/var/lib/rancher/k3s/server/tls/server-ca.crt --kubelet-client-certificate=/var/lib/rancher/k3s/server/tls/client-kube-apiserver.crt --kubelet-client-key=/var/lib/rancher/k3s/server/tls/client-kube-apiserver.key --kubelet-preferred-address-types=InternalIP,ExternalIP,Hostname --profiling=false --proxy-client-cert-file=/var/lib/rancher/k3s/server/tls/client-auth-proxy.crt --proxy-client-key-file=/var/lib/rancher/k3s/server/tls/client-auth-proxy.key --requestheader-allowed-names=system:auth-proxy --requestheader-client-ca-file=/var/lib/rancher/k3s/server/tls/request-header-ca.crt --requestheader-extra-headers-prefix=X-Remote-Extra- --requestheader-group-headers=X-Remote-Group --requestheader-username-headers=X-Remote-User --secure-port=6444 --service-account-issuer=https://kubernetes.default.svc.cluster.local --service-account-key-file=/var/lib/rancher/k3s/server/tls/service.key --service-account-signing-key-file=/var/lib/rancher/k3s/server/tls/service.current.key --service-cluster-ip-range=10.43.0.0/16 --service-node-port-range=30000-32767 --storage-backend=etcd3 --tls-cert-file=/var/lib/rancher/k3s/server/tls/serving-kube-apiserver.crt --tls-cipher-suites=TLS_ECDHE_ECDSA_WITH_AES_256_GCM_SHA384,TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384,TLS_ECDHE_ECDSA_WITH_AES_128_GCM_SHA256,TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256,TLS_ECDHE_ECDSA_WITH_CHACHA20_POLY1305,TLS_ECDHE_RSA_WITH_CHACHA20_POLY1305 --tls-private-key-file=/var/lib/rancher/k3s/server/tls/serving-kube-apiserver.key"

Remediation:

By default, K3s does not set the --enable-admission-plugins to AlwaysAdmit. If this check fails, edit K3s config file /etc/rancher/k3s/config.yaml, remove any lines like below.

kube-apiserver-arg:
  - "enable-admission-plugins=AlwaysAdmit"

1.2.11 Ensure that the admission control plugin AlwaysPullImages is set (Manual)

Result: WARN

Remediation: Permissive, per CIS guidelines, "This setting could impact offline or isolated clusters, which have images pre-loaded and do not have access to a registry to pull in-use images. This setting is not appropriate for clusters which use this configuration." Edit the K3s config file /etc/rancher/k3s/config.yaml and set the below parameter.

kube-apiserver-arg:
  - "enable-admission-plugins=...,AlwaysPullImages,..."

1.2.12 Ensure that the admission control plugin SecurityContextDeny is set if PodSecurityPolicy is not used (Manual)

Result: Not Applicable

Rationale:

Enabling Pod Security Policy is no longer supported on K3s v1.25+ and will cause applications to unexpectedly fail.

1.2.13 Ensure that the admission control plugin ServiceAccount is set (Automated)

Result: PASS

Audit:

journalctl -u k3s | grep 'Running kube-apiserver' | tail -n1

Expected Result: '--disable-admission-plugins' is present OR '--disable-admission-plugins' is not present

Returned Value:

Aug 09 19:01:28 server-0 k3s[2354]: time="2024-08-09T19:01:28Z" level=info msg="Running kube-apiserver --admission-control-config-file=/var/lib/rancher/k3s/server/psa.yaml --advertise-address=10.10.10.100 --advertise-port=6443 --allow-privileged=true --anonymous-auth=false --api-audiences=https://kubernetes.default.svc.cluster.local,k3s --audit-log-maxage=30 --audit-log-maxbackup=10 --audit-log-maxsize=100 --audit-log-path=/var/lib/rancher/k3s/server/logs/audit.log --audit-policy-file=/var/lib/rancher/k3s/server/audit.yaml --authorization-mode=Node,RBAC --bind-address=127.0.0.1 --cert-dir=/var/lib/rancher/k3s/server/tls/temporary-certs --client-ca-file=/var/lib/rancher/k3s/server/tls/client-ca.crt --egress-selector-config-file=/var/lib/rancher/k3s/server/etc/egress-selector-config.yaml --enable-admission-plugins=NodeRestriction --enable-aggregator-routing=true --enable-bootstrap-token-auth=true --encryption-provider-config=/var/lib/rancher/k3s/server/cred/encryption-config.json --etcd-cafile=/var/lib/rancher/k3s/server/tls/etcd/server-ca.crt --etcd-certfile=/var/lib/rancher/k3s/server/tls/etcd/client.crt --etcd-keyfile=/var/lib/rancher/k3s/server/tls/etcd/client.key --etcd-servers=https://127.0.0.1:2379 --feature-gates=JobTrackingWithFinalizers=true --kubelet-certificate-authority=/var/lib/rancher/k3s/server/tls/server-ca.crt --kubelet-client-certificate=/var/lib/rancher/k3s/server/tls/client-kube-apiserver.crt --kubelet-client-key=/var/lib/rancher/k3s/server/tls/client-kube-apiserver.key --kubelet-preferred-address-types=InternalIP,ExternalIP,Hostname --profiling=false --proxy-client-cert-file=/var/lib/rancher/k3s/server/tls/client-auth-proxy.crt --proxy-client-key-file=/var/lib/rancher/k3s/server/tls/client-auth-proxy.key --requestheader-allowed-names=system:auth-proxy --requestheader-client-ca-file=/var/lib/rancher/k3s/server/tls/request-header-ca.crt --requestheader-extra-headers-prefix=X-Remote-Extra- --requestheader-group-headers=X-Remote-Group --requestheader-username-headers=X-Remote-User --secure-port=6444 --service-account-issuer=https://kubernetes.default.svc.cluster.local --service-account-key-file=/var/lib/rancher/k3s/server/tls/service.key --service-account-signing-key-file=/var/lib/rancher/k3s/server/tls/service.current.key --service-cluster-ip-range=10.43.0.0/16 --service-node-port-range=30000-32767 --storage-backend=etcd3 --tls-cert-file=/var/lib/rancher/k3s/server/tls/serving-kube-apiserver.crt --tls-cipher-suites=TLS_ECDHE_ECDSA_WITH_AES_256_GCM_SHA384,TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384,TLS_ECDHE_ECDSA_WITH_AES_128_GCM_SHA256,TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256,TLS_ECDHE_ECDSA_WITH_CHACHA20_POLY1305,TLS_ECDHE_RSA_WITH_CHACHA20_POLY1305 --tls-private-key-file=/var/lib/rancher/k3s/server/tls/serving-kube-apiserver.key"

Remediation:

By default, K3s does not set the --disable-admission-plugins to anything. Follow the documentation and create ServiceAccount objects as per your environment. If this check fails, edit the K3s config file /etc/rancher/k3s/config.yaml and remove any lines like below.

kube-apiserver-arg:
  - "disable-admission-plugins=ServiceAccount"

1.2.14 Ensure that the admission control plugin NamespaceLifecycle is set (Automated)

Result: PASS

Audit:

journalctl -u k3s | grep 'Running kube-apiserver' | tail -n1

Expected Result: '--disable-admission-plugins' is present OR '--disable-admission-plugins' is not present

Returned Value:

Aug 09 19:01:28 server-0 k3s[2354]: time="2024-08-09T19:01:28Z" level=info msg="Running kube-apiserver --admission-control-config-file=/var/lib/rancher/k3s/server/psa.yaml --advertise-address=10.10.10.100 --advertise-port=6443 --allow-privileged=true --anonymous-auth=false --api-audiences=https://kubernetes.default.svc.cluster.local,k3s --audit-log-maxage=30 --audit-log-maxbackup=10 --audit-log-maxsize=100 --audit-log-path=/var/lib/rancher/k3s/server/logs/audit.log --audit-policy-file=/var/lib/rancher/k3s/server/audit.yaml --authorization-mode=Node,RBAC --bind-address=127.0.0.1 --cert-dir=/var/lib/rancher/k3s/server/tls/temporary-certs --client-ca-file=/var/lib/rancher/k3s/server/tls/client-ca.crt --egress-selector-config-file=/var/lib/rancher/k3s/server/etc/egress-selector-config.yaml --enable-admission-plugins=NodeRestriction --enable-aggregator-routing=true --enable-bootstrap-token-auth=true --encryption-provider-config=/var/lib/rancher/k3s/server/cred/encryption-config.json --etcd-cafile=/var/lib/rancher/k3s/server/tls/etcd/server-ca.crt --etcd-certfile=/var/lib/rancher/k3s/server/tls/etcd/client.crt --etcd-keyfile=/var/lib/rancher/k3s/server/tls/etcd/client.key --etcd-servers=https://127.0.0.1:2379 --feature-gates=JobTrackingWithFinalizers=true --kubelet-certificate-authority=/var/lib/rancher/k3s/server/tls/server-ca.crt --kubelet-client-certificate=/var/lib/rancher/k3s/server/tls/client-kube-apiserver.crt --kubelet-client-key=/var/lib/rancher/k3s/server/tls/client-kube-apiserver.key --kubelet-preferred-address-types=InternalIP,ExternalIP,Hostname --profiling=false --proxy-client-cert-file=/var/lib/rancher/k3s/server/tls/client-auth-proxy.crt --proxy-client-key-file=/var/lib/rancher/k3s/server/tls/client-auth-proxy.key --requestheader-allowed-names=system:auth-proxy --requestheader-client-ca-file=/var/lib/rancher/k3s/server/tls/request-header-ca.crt --requestheader-extra-headers-prefix=X-Remote-Extra- --requestheader-group-headers=X-Remote-Group --requestheader-username-headers=X-Remote-User --secure-port=6444 --service-account-issuer=https://kubernetes.default.svc.cluster.local --service-account-key-file=/var/lib/rancher/k3s/server/tls/service.key --service-account-signing-key-file=/var/lib/rancher/k3s/server/tls/service.current.key --service-cluster-ip-range=10.43.0.0/16 --service-node-port-range=30000-32767 --storage-backend=etcd3 --tls-cert-file=/var/lib/rancher/k3s/server/tls/serving-kube-apiserver.crt --tls-cipher-suites=TLS_ECDHE_ECDSA_WITH_AES_256_GCM_SHA384,TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384,TLS_ECDHE_ECDSA_WITH_AES_128_GCM_SHA256,TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256,TLS_ECDHE_ECDSA_WITH_CHACHA20_POLY1305,TLS_ECDHE_RSA_WITH_CHACHA20_POLY1305 --tls-private-key-file=/var/lib/rancher/k3s/server/tls/serving-kube-apiserver.key"

Remediation:

By default, K3s does not set the --disable-admission-plugins to anything. If this check fails, edit the K3s config file /etc/rancher/k3s/config.yaml and remove any lines like below.

kube-apiserver-arg:
  - "disable-admission-plugins=...,NamespaceLifecycle,..."

1.2.15 Ensure that the admission control plugin NodeRestriction is set (Automated)

Result: PASS

Audit:

journalctl -u k3s | grep 'Running kube-apiserver' | tail -n1 | grep 'enable-admission-plugins'

Expected Result: '--enable-admission-plugins' has 'NodeRestriction'

Returned Value:

Aug 09 19:01:28 server-0 k3s[2354]: time="2024-08-09T19:01:28Z" level=info msg="Running kube-apiserver --admission-control-config-file=/var/lib/rancher/k3s/server/psa.yaml --advertise-address=10.10.10.100 --advertise-port=6443 --allow-privileged=true --anonymous-auth=false --api-audiences=https://kubernetes.default.svc.cluster.local,k3s --audit-log-maxage=30 --audit-log-maxbackup=10 --audit-log-maxsize=100 --audit-log-path=/var/lib/rancher/k3s/server/logs/audit.log --audit-policy-file=/var/lib/rancher/k3s/server/audit.yaml --authorization-mode=Node,RBAC --bind-address=127.0.0.1 --cert-dir=/var/lib/rancher/k3s/server/tls/temporary-certs --client-ca-file=/var/lib/rancher/k3s/server/tls/client-ca.crt --egress-selector-config-file=/var/lib/rancher/k3s/server/etc/egress-selector-config.yaml --enable-admission-plugins=NodeRestriction --enable-aggregator-routing=true --enable-bootstrap-token-auth=true --encryption-provider-config=/var/lib/rancher/k3s/server/cred/encryption-config.json --etcd-cafile=/var/lib/rancher/k3s/server/tls/etcd/server-ca.crt --etcd-certfile=/var/lib/rancher/k3s/server/tls/etcd/client.crt --etcd-keyfile=/var/lib/rancher/k3s/server/tls/etcd/client.key --etcd-servers=https://127.0.0.1:2379 --feature-gates=JobTrackingWithFinalizers=true --kubelet-certificate-authority=/var/lib/rancher/k3s/server/tls/server-ca.crt --kubelet-client-certificate=/var/lib/rancher/k3s/server/tls/client-kube-apiserver.crt --kubelet-client-key=/var/lib/rancher/k3s/server/tls/client-kube-apiserver.key --kubelet-preferred-address-types=InternalIP,ExternalIP,Hostname --profiling=false --proxy-client-cert-file=/var/lib/rancher/k3s/server/tls/client-auth-proxy.crt --proxy-client-key-file=/var/lib/rancher/k3s/server/tls/client-auth-proxy.key --requestheader-allowed-names=system:auth-proxy --requestheader-client-ca-file=/var/lib/rancher/k3s/server/tls/request-header-ca.crt --requestheader-extra-headers-prefix=X-Remote-Extra- --requestheader-group-headers=X-Remote-Group --requestheader-username-headers=X-Remote-User --secure-port=6444 --service-account-issuer=https://kubernetes.default.svc.cluster.local --service-account-key-file=/var/lib/rancher/k3s/server/tls/service.key --service-account-signing-key-file=/var/lib/rancher/k3s/server/tls/service.current.key --service-cluster-ip-range=10.43.0.0/16 --service-node-port-range=30000-32767 --storage-backend=etcd3 --tls-cert-file=/var/lib/rancher/k3s/server/tls/serving-kube-apiserver.crt --tls-cipher-suites=TLS_ECDHE_ECDSA_WITH_AES_256_GCM_SHA384,TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384,TLS_ECDHE_ECDSA_WITH_AES_128_GCM_SHA256,TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256,TLS_ECDHE_ECDSA_WITH_CHACHA20_POLY1305,TLS_ECDHE_RSA_WITH_CHACHA20_POLY1305 --tls-private-key-file=/var/lib/rancher/k3s/server/tls/serving-kube-apiserver.key"

Remediation:

By default, K3s sets the --enable-admission-plugins to NodeRestriction. If using the K3s config file /etc/rancher/k3s/config.yaml, check that you are not overriding the admission plugins. If you are, include NodeRestriction in the list.

kube-apiserver-arg:
  - "enable-admission-plugins=...,NodeRestriction,..."

1.2.16 Ensure that the --secure-port argument is not set to 0 - NoteThis recommendation is obsolete and will be deleted per the consensus process (Automated)

Result: PASS

Audit:

journalctl -u k3s | grep 'Running kube-apiserver' | tail -n1 | grep 'secure-port'

Expected Result: '--secure-port' is greater than 0 OR '--secure-port' is not present

Returned Value:

Aug 09 19:01:28 server-0 k3s[2354]: time="2024-08-09T19:01:28Z" level=info msg="Running kube-apiserver --admission-control-config-file=/var/lib/rancher/k3s/server/psa.yaml --advertise-address=10.10.10.100 --advertise-port=6443 --allow-privileged=true --anonymous-auth=false --api-audiences=https://kubernetes.default.svc.cluster.local,k3s --audit-log-maxage=30 --audit-log-maxbackup=10 --audit-log-maxsize=100 --audit-log-path=/var/lib/rancher/k3s/server/logs/audit.log --audit-policy-file=/var/lib/rancher/k3s/server/audit.yaml --authorization-mode=Node,RBAC --bind-address=127.0.0.1 --cert-dir=/var/lib/rancher/k3s/server/tls/temporary-certs --client-ca-file=/var/lib/rancher/k3s/server/tls/client-ca.crt --egress-selector-config-file=/var/lib/rancher/k3s/server/etc/egress-selector-config.yaml --enable-admission-plugins=NodeRestriction --enable-aggregator-routing=true --enable-bootstrap-token-auth=true --encryption-provider-config=/var/lib/rancher/k3s/server/cred/encryption-config.json --etcd-cafile=/var/lib/rancher/k3s/server/tls/etcd/server-ca.crt --etcd-certfile=/var/lib/rancher/k3s/server/tls/etcd/client.crt --etcd-keyfile=/var/lib/rancher/k3s/server/tls/etcd/client.key --etcd-servers=https://127.0.0.1:2379 --feature-gates=JobTrackingWithFinalizers=true --kubelet-certificate-authority=/var/lib/rancher/k3s/server/tls/server-ca.crt --kubelet-client-certificate=/var/lib/rancher/k3s/server/tls/client-kube-apiserver.crt --kubelet-client-key=/var/lib/rancher/k3s/server/tls/client-kube-apiserver.key --kubelet-preferred-address-types=InternalIP,ExternalIP,Hostname --profiling=false --proxy-client-cert-file=/var/lib/rancher/k3s/server/tls/client-auth-proxy.crt --proxy-client-key-file=/var/lib/rancher/k3s/server/tls/client-auth-proxy.key --requestheader-allowed-names=system:auth-proxy --requestheader-client-ca-file=/var/lib/rancher/k3s/server/tls/request-header-ca.crt --requestheader-extra-headers-prefix=X-Remote-Extra- --requestheader-group-headers=X-Remote-Group --requestheader-username-headers=X-Remote-User --secure-port=6444 --service-account-issuer=https://kubernetes.default.svc.cluster.local --service-account-key-file=/var/lib/rancher/k3s/server/tls/service.key --service-account-signing-key-file=/var/lib/rancher/k3s/server/tls/service.current.key --service-cluster-ip-range=10.43.0.0/16 --service-node-port-range=30000-32767 --storage-backend=etcd3 --tls-cert-file=/var/lib/rancher/k3s/server/tls/serving-kube-apiserver.crt --tls-cipher-suites=TLS_ECDHE_ECDSA_WITH_AES_256_GCM_SHA384,TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384,TLS_ECDHE_ECDSA_WITH_AES_128_GCM_SHA256,TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256,TLS_ECDHE_ECDSA_WITH_CHACHA20_POLY1305,TLS_ECDHE_RSA_WITH_CHACHA20_POLY1305 --tls-private-key-file=/var/lib/rancher/k3s/server/tls/serving-kube-apiserver.key"

Remediation:

By default, K3s sets the secure port to 6444. If this check fails, edit the K3s config file /etc/rancher/k3s/config.yaml and remove any lines like below.

kube-apiserver-arg:
  - "secure-port=<PORT>"

1.2.17 Ensure that the --profiling argument is set to false (Automated)

Result: PASS

Audit:

journalctl -u k3s | grep 'Running kube-apiserver' | tail -n1 | grep 'profiling'

Expected Result: '--profiling' is equal to 'false'

Returned Value:

Aug 09 19:01:28 server-0 k3s[2354]: time="2024-08-09T19:01:28Z" level=info msg="Running kube-apiserver --admission-control-config-file=/var/lib/rancher/k3s/server/psa.yaml --advertise-address=10.10.10.100 --advertise-port=6443 --allow-privileged=true --anonymous-auth=false --api-audiences=https://kubernetes.default.svc.cluster.local,k3s --audit-log-maxage=30 --audit-log-maxbackup=10 --audit-log-maxsize=100 --audit-log-path=/var/lib/rancher/k3s/server/logs/audit.log --audit-policy-file=/var/lib/rancher/k3s/server/audit.yaml --authorization-mode=Node,RBAC --bind-address=127.0.0.1 --cert-dir=/var/lib/rancher/k3s/server/tls/temporary-certs --client-ca-file=/var/lib/rancher/k3s/server/tls/client-ca.crt --egress-selector-config-file=/var/lib/rancher/k3s/server/etc/egress-selector-config.yaml --enable-admission-plugins=NodeRestriction --enable-aggregator-routing=true --enable-bootstrap-token-auth=true --encryption-provider-config=/var/lib/rancher/k3s/server/cred/encryption-config.json --etcd-cafile=/var/lib/rancher/k3s/server/tls/etcd/server-ca.crt --etcd-certfile=/var/lib/rancher/k3s/server/tls/etcd/client.crt --etcd-keyfile=/var/lib/rancher/k3s/server/tls/etcd/client.key --etcd-servers=https://127.0.0.1:2379 --feature-gates=JobTrackingWithFinalizers=true --kubelet-certificate-authority=/var/lib/rancher/k3s/server/tls/server-ca.crt --kubelet-client-certificate=/var/lib/rancher/k3s/server/tls/client-kube-apiserver.crt --kubelet-client-key=/var/lib/rancher/k3s/server/tls/client-kube-apiserver.key --kubelet-preferred-address-types=InternalIP,ExternalIP,Hostname --profiling=false --proxy-client-cert-file=/var/lib/rancher/k3s/server/tls/client-auth-proxy.crt --proxy-client-key-file=/var/lib/rancher/k3s/server/tls/client-auth-proxy.key --requestheader-allowed-names=system:auth-proxy --requestheader-client-ca-file=/var/lib/rancher/k3s/server/tls/request-header-ca.crt --requestheader-extra-headers-prefix=X-Remote-Extra- --requestheader-group-headers=X-Remote-Group --requestheader-username-headers=X-Remote-User --secure-port=6444 --service-account-issuer=https://kubernetes.default.svc.cluster.local --service-account-key-file=/var/lib/rancher/k3s/server/tls/service.key --service-account-signing-key-file=/var/lib/rancher/k3s/server/tls/service.current.key --service-cluster-ip-range=10.43.0.0/16 --service-node-port-range=30000-32767 --storage-backend=etcd3 --tls-cert-file=/var/lib/rancher/k3s/server/tls/serving-kube-apiserver.crt --tls-cipher-suites=TLS_ECDHE_ECDSA_WITH_AES_256_GCM_SHA384,TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384,TLS_ECDHE_ECDSA_WITH_AES_128_GCM_SHA256,TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256,TLS_ECDHE_ECDSA_WITH_CHACHA20_POLY1305,TLS_ECDHE_RSA_WITH_CHACHA20_POLY1305 --tls-private-key-file=/var/lib/rancher/k3s/server/tls/serving-kube-apiserver.key"

Remediation:

By default, K3s sets the --profiling argument to false. If this check fails, edit the K3s config file /etc/rancher/k3s/config.yaml and remove any lines like below.

kube-apiserver-arg:
  - "profiling=true"

1.2.18 Ensure that the --audit-log-path argument is set (Manual)

Result: PASS

Audit:

journalctl -u k3s | grep 'Running kube-apiserver' | tail -n1

Expected Result: '--audit-log-path' is present

Returned Value:

Aug 09 19:01:28 server-0 k3s[2354]: time="2024-08-09T19:01:28Z" level=info msg="Running kube-apiserver --admission-control-config-file=/var/lib/rancher/k3s/server/psa.yaml --advertise-address=10.10.10.100 --advertise-port=6443 --allow-privileged=true --anonymous-auth=false --api-audiences=https://kubernetes.default.svc.cluster.local,k3s --audit-log-maxage=30 --audit-log-maxbackup=10 --audit-log-maxsize=100 --audit-log-path=/var/lib/rancher/k3s/server/logs/audit.log --audit-policy-file=/var/lib/rancher/k3s/server/audit.yaml --authorization-mode=Node,RBAC --bind-address=127.0.0.1 --cert-dir=/var/lib/rancher/k3s/server/tls/temporary-certs --client-ca-file=/var/lib/rancher/k3s/server/tls/client-ca.crt --egress-selector-config-file=/var/lib/rancher/k3s/server/etc/egress-selector-config.yaml --enable-admission-plugins=NodeRestriction --enable-aggregator-routing=true --enable-bootstrap-token-auth=true --encryption-provider-config=/var/lib/rancher/k3s/server/cred/encryption-config.json --etcd-cafile=/var/lib/rancher/k3s/server/tls/etcd/server-ca.crt --etcd-certfile=/var/lib/rancher/k3s/server/tls/etcd/client.crt --etcd-keyfile=/var/lib/rancher/k3s/server/tls/etcd/client.key --etcd-servers=https://127.0.0.1:2379 --feature-gates=JobTrackingWithFinalizers=true --kubelet-certificate-authority=/var/lib/rancher/k3s/server/tls/server-ca.crt --kubelet-client-certificate=/var/lib/rancher/k3s/server/tls/client-kube-apiserver.crt --kubelet-client-key=/var/lib/rancher/k3s/server/tls/client-kube-apiserver.key --kubelet-preferred-address-types=InternalIP,ExternalIP,Hostname --profiling=false --proxy-client-cert-file=/var/lib/rancher/k3s/server/tls/client-auth-proxy.crt --proxy-client-key-file=/var/lib/rancher/k3s/server/tls/client-auth-proxy.key --requestheader-allowed-names=system:auth-proxy --requestheader-client-ca-file=/var/lib/rancher/k3s/server/tls/request-header-ca.crt --requestheader-extra-headers-prefix=X-Remote-Extra- --requestheader-group-headers=X-Remote-Group --requestheader-username-headers=X-Remote-User --secure-port=6444 --service-account-issuer=https://kubernetes.default.svc.cluster.local --service-account-key-file=/var/lib/rancher/k3s/server/tls/service.key --service-account-signing-key-file=/var/lib/rancher/k3s/server/tls/service.current.key --service-cluster-ip-range=10.43.0.0/16 --service-node-port-range=30000-32767 --storage-backend=etcd3 --tls-cert-file=/var/lib/rancher/k3s/server/tls/serving-kube-apiserver.crt --tls-cipher-suites=TLS_ECDHE_ECDSA_WITH_AES_256_GCM_SHA384,TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384,TLS_ECDHE_ECDSA_WITH_AES_128_GCM_SHA256,TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256,TLS_ECDHE_ECDSA_WITH_CHACHA20_POLY1305,TLS_ECDHE_RSA_WITH_CHACHA20_POLY1305 --tls-private-key-file=/var/lib/rancher/k3s/server/tls/serving-kube-apiserver.key"

Remediation:

Edit the K3s config file /etc/rancher/k3s/config.yaml and set the audit-log-path parameter to a suitable path and file where you would like audit logs to be written, for example,

kube-apiserver-arg:
  - "audit-log-path=/var/lib/rancher/k3s/server/logs/audit.log"

1.2.19 Ensure that the --audit-log-maxage argument is set to 30 or as appropriate (Manual)

Result: PASS

Audit:

journalctl -u k3s | grep 'Running kube-apiserver' | tail -n1

Expected Result: '--audit-log-maxage' is greater or equal to 30

Returned Value:

Aug 09 19:01:28 server-0 k3s[2354]: time="2024-08-09T19:01:28Z" level=info msg="Running kube-apiserver --admission-control-config-file=/var/lib/rancher/k3s/server/psa.yaml --advertise-address=10.10.10.100 --advertise-port=6443 --allow-privileged=true --anonymous-auth=false --api-audiences=https://kubernetes.default.svc.cluster.local,k3s --audit-log-maxage=30 --audit-log-maxbackup=10 --audit-log-maxsize=100 --audit-log-path=/var/lib/rancher/k3s/server/logs/audit.log --audit-policy-file=/var/lib/rancher/k3s/server/audit.yaml --authorization-mode=Node,RBAC --bind-address=127.0.0.1 --cert-dir=/var/lib/rancher/k3s/server/tls/temporary-certs --client-ca-file=/var/lib/rancher/k3s/server/tls/client-ca.crt --egress-selector-config-file=/var/lib/rancher/k3s/server/etc/egress-selector-config.yaml --enable-admission-plugins=NodeRestriction --enable-aggregator-routing=true --enable-bootstrap-token-auth=true --encryption-provider-config=/var/lib/rancher/k3s/server/cred/encryption-config.json --etcd-cafile=/var/lib/rancher/k3s/server/tls/etcd/server-ca.crt --etcd-certfile=/var/lib/rancher/k3s/server/tls/etcd/client.crt --etcd-keyfile=/var/lib/rancher/k3s/server/tls/etcd/client.key --etcd-servers=https://127.0.0.1:2379 --feature-gates=JobTrackingWithFinalizers=true --kubelet-certificate-authority=/var/lib/rancher/k3s/server/tls/server-ca.crt --kubelet-client-certificate=/var/lib/rancher/k3s/server/tls/client-kube-apiserver.crt --kubelet-client-key=/var/lib/rancher/k3s/server/tls/client-kube-apiserver.key --kubelet-preferred-address-types=InternalIP,ExternalIP,Hostname --profiling=false --proxy-client-cert-file=/var/lib/rancher/k3s/server/tls/client-auth-proxy.crt --proxy-client-key-file=/var/lib/rancher/k3s/server/tls/client-auth-proxy.key --requestheader-allowed-names=system:auth-proxy --requestheader-client-ca-file=/var/lib/rancher/k3s/server/tls/request-header-ca.crt --requestheader-extra-headers-prefix=X-Remote-Extra- --requestheader-group-headers=X-Remote-Group --requestheader-username-headers=X-Remote-User --secure-port=6444 --service-account-issuer=https://kubernetes.default.svc.cluster.local --service-account-key-file=/var/lib/rancher/k3s/server/tls/service.key --service-account-signing-key-file=/var/lib/rancher/k3s/server/tls/service.current.key --service-cluster-ip-range=10.43.0.0/16 --service-node-port-range=30000-32767 --storage-backend=etcd3 --tls-cert-file=/var/lib/rancher/k3s/server/tls/serving-kube-apiserver.crt --tls-cipher-suites=TLS_ECDHE_ECDSA_WITH_AES_256_GCM_SHA384,TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384,TLS_ECDHE_ECDSA_WITH_AES_128_GCM_SHA256,TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256,TLS_ECDHE_ECDSA_WITH_CHACHA20_POLY1305,TLS_ECDHE_RSA_WITH_CHACHA20_POLY1305 --tls-private-key-file=/var/lib/rancher/k3s/server/tls/serving-kube-apiserver.key"

Remediation:

Edit the K3s config file /etc/rancher/k3s/config.yaml on the control plane node and set the audit-log-maxage parameter to 30 or as an appropriate number of days, for example,

kube-apiserver-arg:
  - "audit-log-maxage=30"

1.2.20 Ensure that the --audit-log-maxbackup argument is set to 10 or as appropriate (Manual)

Result: PASS

Audit:

journalctl -u k3s | grep 'Running kube-apiserver' | tail -n1

Expected Result: '--audit-log-maxbackup' is greater or equal to 10

Returned Value:

Aug 09 19:01:28 server-0 k3s[2354]: time="2024-08-09T19:01:28Z" level=info msg="Running kube-apiserver --admission-control-config-file=/var/lib/rancher/k3s/server/psa.yaml --advertise-address=10.10.10.100 --advertise-port=6443 --allow-privileged=true --anonymous-auth=false --api-audiences=https://kubernetes.default.svc.cluster.local,k3s --audit-log-maxage=30 --audit-log-maxbackup=10 --audit-log-maxsize=100 --audit-log-path=/var/lib/rancher/k3s/server/logs/audit.log --audit-policy-file=/var/lib/rancher/k3s/server/audit.yaml --authorization-mode=Node,RBAC --bind-address=127.0.0.1 --cert-dir=/var/lib/rancher/k3s/server/tls/temporary-certs --client-ca-file=/var/lib/rancher/k3s/server/tls/client-ca.crt --egress-selector-config-file=/var/lib/rancher/k3s/server/etc/egress-selector-config.yaml --enable-admission-plugins=NodeRestriction --enable-aggregator-routing=true --enable-bootstrap-token-auth=true --encryption-provider-config=/var/lib/rancher/k3s/server/cred/encryption-config.json --etcd-cafile=/var/lib/rancher/k3s/server/tls/etcd/server-ca.crt --etcd-certfile=/var/lib/rancher/k3s/server/tls/etcd/client.crt --etcd-keyfile=/var/lib/rancher/k3s/server/tls/etcd/client.key --etcd-servers=https://127.0.0.1:2379 --feature-gates=JobTrackingWithFinalizers=true --kubelet-certificate-authority=/var/lib/rancher/k3s/server/tls/server-ca.crt --kubelet-client-certificate=/var/lib/rancher/k3s/server/tls/client-kube-apiserver.crt --kubelet-client-key=/var/lib/rancher/k3s/server/tls/client-kube-apiserver.key --kubelet-preferred-address-types=InternalIP,ExternalIP,Hostname --profiling=false --proxy-client-cert-file=/var/lib/rancher/k3s/server/tls/client-auth-proxy.crt --proxy-client-key-file=/var/lib/rancher/k3s/server/tls/client-auth-proxy.key --requestheader-allowed-names=system:auth-proxy --requestheader-client-ca-file=/var/lib/rancher/k3s/server/tls/request-header-ca.crt --requestheader-extra-headers-prefix=X-Remote-Extra- --requestheader-group-headers=X-Remote-Group --requestheader-username-headers=X-Remote-User --secure-port=6444 --service-account-issuer=https://kubernetes.default.svc.cluster.local --service-account-key-file=/var/lib/rancher/k3s/server/tls/service.key --service-account-signing-key-file=/var/lib/rancher/k3s/server/tls/service.current.key --service-cluster-ip-range=10.43.0.0/16 --service-node-port-range=30000-32767 --storage-backend=etcd3 --tls-cert-file=/var/lib/rancher/k3s/server/tls/serving-kube-apiserver.crt --tls-cipher-suites=TLS_ECDHE_ECDSA_WITH_AES_256_GCM_SHA384,TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384,TLS_ECDHE_ECDSA_WITH_AES_128_GCM_SHA256,TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256,TLS_ECDHE_ECDSA_WITH_CHACHA20_POLY1305,TLS_ECDHE_RSA_WITH_CHACHA20_POLY1305 --tls-private-key-file=/var/lib/rancher/k3s/server/tls/serving-kube-apiserver.key"

Remediation:

Edit the K3s config file /etc/rancher/k3s/config.yaml on the control plane node and set the audit-log-maxbackup parameter to 10 or to an appropriate value. For example,

kube-apiserver-arg:
  - "audit-log-maxbackup=10"

1.2.21 Ensure that the --audit-log-maxsize argument is set to 100 or as appropriate (Manual)

Result: PASS

Audit:

journalctl -u k3s | grep 'Running kube-apiserver' | tail -n1

Expected Result: '--audit-log-maxsize' is greater or equal to 100

Returned Value:

Aug 09 19:01:28 server-0 k3s[2354]: time="2024-08-09T19:01:28Z" level=info msg="Running kube-apiserver --admission-control-config-file=/var/lib/rancher/k3s/server/psa.yaml --advertise-address=10.10.10.100 --advertise-port=6443 --allow-privileged=true --anonymous-auth=false --api-audiences=https://kubernetes.default.svc.cluster.local,k3s --audit-log-maxage=30 --audit-log-maxbackup=10 --audit-log-maxsize=100 --audit-log-path=/var/lib/rancher/k3s/server/logs/audit.log --audit-policy-file=/var/lib/rancher/k3s/server/audit.yaml --authorization-mode=Node,RBAC --bind-address=127.0.0.1 --cert-dir=/var/lib/rancher/k3s/server/tls/temporary-certs --client-ca-file=/var/lib/rancher/k3s/server/tls/client-ca.crt --egress-selector-config-file=/var/lib/rancher/k3s/server/etc/egress-selector-config.yaml --enable-admission-plugins=NodeRestriction --enable-aggregator-routing=true --enable-bootstrap-token-auth=true --encryption-provider-config=/var/lib/rancher/k3s/server/cred/encryption-config.json --etcd-cafile=/var/lib/rancher/k3s/server/tls/etcd/server-ca.crt --etcd-certfile=/var/lib/rancher/k3s/server/tls/etcd/client.crt --etcd-keyfile=/var/lib/rancher/k3s/server/tls/etcd/client.key --etcd-servers=https://127.0.0.1:2379 --feature-gates=JobTrackingWithFinalizers=true --kubelet-certificate-authority=/var/lib/rancher/k3s/server/tls/server-ca.crt --kubelet-client-certificate=/var/lib/rancher/k3s/server/tls/client-kube-apiserver.crt --kubelet-client-key=/var/lib/rancher/k3s/server/tls/client-kube-apiserver.key --kubelet-preferred-address-types=InternalIP,ExternalIP,Hostname --profiling=false --proxy-client-cert-file=/var/lib/rancher/k3s/server/tls/client-auth-proxy.crt --proxy-client-key-file=/var/lib/rancher/k3s/server/tls/client-auth-proxy.key --requestheader-allowed-names=system:auth-proxy --requestheader-client-ca-file=/var/lib/rancher/k3s/server/tls/request-header-ca.crt --requestheader-extra-headers-prefix=X-Remote-Extra- --requestheader-group-headers=X-Remote-Group --requestheader-username-headers=X-Remote-User --secure-port=6444 --service-account-issuer=https://kubernetes.default.svc.cluster.local --service-account-key-file=/var/lib/rancher/k3s/server/tls/service.key --service-account-signing-key-file=/var/lib/rancher/k3s/server/tls/service.current.key --service-cluster-ip-range=10.43.0.0/16 --service-node-port-range=30000-32767 --storage-backend=etcd3 --tls-cert-file=/var/lib/rancher/k3s/server/tls/serving-kube-apiserver.crt --tls-cipher-suites=TLS_ECDHE_ECDSA_WITH_AES_256_GCM_SHA384,TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384,TLS_ECDHE_ECDSA_WITH_AES_128_GCM_SHA256,TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256,TLS_ECDHE_ECDSA_WITH_CHACHA20_POLY1305,TLS_ECDHE_RSA_WITH_CHACHA20_POLY1305 --tls-private-key-file=/var/lib/rancher/k3s/server/tls/serving-kube-apiserver.key"

Remediation:

Edit the K3s config file /etc/rancher/k3s/config.yaml on the control plane node and set the audit-log-maxsize parameter to an appropriate size in MB. For example,

kube-apiserver-arg:
  - "audit-log-maxsize=100"

1.2.22 Ensure that the --request-timeout argument is set as appropriate (Manual)

Result: WARN

Remediation: Permissive, per CIS guidelines, "it is recommended to set this limit as appropriate and change the default limit of 60 seconds only if needed". Edit the K3s config file /etc/rancher/k3s/config.yaml and set the below parameter if needed. For example,

kube-apiserver-arg:
  - "request-timeout=300s"

1.2.23 Ensure that the --service-account-lookup argument is set to true (Automated)

Result: PASS

Audit:

journalctl -u k3s | grep 'Running kube-apiserver' | tail -n1

Expected Result: '--service-account-lookup' is not present OR '--service-account-lookup' is present

Returned Value:

Aug 09 19:01:28 server-0 k3s[2354]: time="2024-08-09T19:01:28Z" level=info msg="Running kube-apiserver --admission-control-config-file=/var/lib/rancher/k3s/server/psa.yaml --advertise-address=10.10.10.100 --advertise-port=6443 --allow-privileged=true --anonymous-auth=false --api-audiences=https://kubernetes.default.svc.cluster.local,k3s --audit-log-maxage=30 --audit-log-maxbackup=10 --audit-log-maxsize=100 --audit-log-path=/var/lib/rancher/k3s/server/logs/audit.log --audit-policy-file=/var/lib/rancher/k3s/server/audit.yaml --authorization-mode=Node,RBAC --bind-address=127.0.0.1 --cert-dir=/var/lib/rancher/k3s/server/tls/temporary-certs --client-ca-file=/var/lib/rancher/k3s/server/tls/client-ca.crt --egress-selector-config-file=/var/lib/rancher/k3s/server/etc/egress-selector-config.yaml --enable-admission-plugins=NodeRestriction --enable-aggregator-routing=true --enable-bootstrap-token-auth=true --encryption-provider-config=/var/lib/rancher/k3s/server/cred/encryption-config.json --etcd-cafile=/var/lib/rancher/k3s/server/tls/etcd/server-ca.crt --etcd-certfile=/var/lib/rancher/k3s/server/tls/etcd/client.crt --etcd-keyfile=/var/lib/rancher/k3s/server/tls/etcd/client.key --etcd-servers=https://127.0.0.1:2379 --feature-gates=JobTrackingWithFinalizers=true --kubelet-certificate-authority=/var/lib/rancher/k3s/server/tls/server-ca.crt --kubelet-client-certificate=/var/lib/rancher/k3s/server/tls/client-kube-apiserver.crt --kubelet-client-key=/var/lib/rancher/k3s/server/tls/client-kube-apiserver.key --kubelet-preferred-address-types=InternalIP,ExternalIP,Hostname --profiling=false --proxy-client-cert-file=/var/lib/rancher/k3s/server/tls/client-auth-proxy.crt --proxy-client-key-file=/var/lib/rancher/k3s/server/tls/client-auth-proxy.key --requestheader-allowed-names=system:auth-proxy --requestheader-client-ca-file=/var/lib/rancher/k3s/server/tls/request-header-ca.crt --requestheader-extra-headers-prefix=X-Remote-Extra- --requestheader-group-headers=X-Remote-Group --requestheader-username-headers=X-Remote-User --secure-port=6444 --service-account-issuer=https://kubernetes.default.svc.cluster.local --service-account-key-file=/var/lib/rancher/k3s/server/tls/service.key --service-account-signing-key-file=/var/lib/rancher/k3s/server/tls/service.current.key --service-cluster-ip-range=10.43.0.0/16 --service-node-port-range=30000-32767 --storage-backend=etcd3 --tls-cert-file=/var/lib/rancher/k3s/server/tls/serving-kube-apiserver.crt --tls-cipher-suites=TLS_ECDHE_ECDSA_WITH_AES_256_GCM_SHA384,TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384,TLS_ECDHE_ECDSA_WITH_AES_128_GCM_SHA256,TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256,TLS_ECDHE_ECDSA_WITH_CHACHA20_POLY1305,TLS_ECDHE_RSA_WITH_CHACHA20_POLY1305 --tls-private-key-file=/var/lib/rancher/k3s/server/tls/serving-kube-apiserver.key"

Remediation:

By default, K3s does not set the --service-account-lookup argument. Edit the K3s config file /etc/rancher/k3s/config.yaml and set the service-account-lookup. For example,

kube-apiserver-arg:
  - "service-account-lookup=true"

Alternatively, you can delete the service-account-lookup parameter from this file so that the default takes effect.

1.2.24 Ensure that the --service-account-key-file argument is set as appropriate (Automated)

Result: PASS

Audit:

journalctl -u k3s | grep 'Running kube-apiserver' | tail -n1

Expected Result: '--service-account-key-file' is present

Returned Value:

Aug 09 19:01:28 server-0 k3s[2354]: time="2024-08-09T19:01:28Z" level=info msg="Running kube-apiserver --admission-control-config-file=/var/lib/rancher/k3s/server/psa.yaml --advertise-address=10.10.10.100 --advertise-port=6443 --allow-privileged=true --anonymous-auth=false --api-audiences=https://kubernetes.default.svc.cluster.local,k3s --audit-log-maxage=30 --audit-log-maxbackup=10 --audit-log-maxsize=100 --audit-log-path=/var/lib/rancher/k3s/server/logs/audit.log --audit-policy-file=/var/lib/rancher/k3s/server/audit.yaml --authorization-mode=Node,RBAC --bind-address=127.0.0.1 --cert-dir=/var/lib/rancher/k3s/server/tls/temporary-certs --client-ca-file=/var/lib/rancher/k3s/server/tls/client-ca.crt --egress-selector-config-file=/var/lib/rancher/k3s/server/etc/egress-selector-config.yaml --enable-admission-plugins=NodeRestriction --enable-aggregator-routing=true --enable-bootstrap-token-auth=true --encryption-provider-config=/var/lib/rancher/k3s/server/cred/encryption-config.json --etcd-cafile=/var/lib/rancher/k3s/server/tls/etcd/server-ca.crt --etcd-certfile=/var/lib/rancher/k3s/server/tls/etcd/client.crt --etcd-keyfile=/var/lib/rancher/k3s/server/tls/etcd/client.key --etcd-servers=https://127.0.0.1:2379 --feature-gates=JobTrackingWithFinalizers=true --kubelet-certificate-authority=/var/lib/rancher/k3s/server/tls/server-ca.crt --kubelet-client-certificate=/var/lib/rancher/k3s/server/tls/client-kube-apiserver.crt --kubelet-client-key=/var/lib/rancher/k3s/server/tls/client-kube-apiserver.key --kubelet-preferred-address-types=InternalIP,ExternalIP,Hostname --profiling=false --proxy-client-cert-file=/var/lib/rancher/k3s/server/tls/client-auth-proxy.crt --proxy-client-key-file=/var/lib/rancher/k3s/server/tls/client-auth-proxy.key --requestheader-allowed-names=system:auth-proxy --requestheader-client-ca-file=/var/lib/rancher/k3s/server/tls/request-header-ca.crt --requestheader-extra-headers-prefix=X-Remote-Extra- --requestheader-group-headers=X-Remote-Group --requestheader-username-headers=X-Remote-User --secure-port=6444 --service-account-issuer=https://kubernetes.default.svc.cluster.local --service-account-key-file=/var/lib/rancher/k3s/server/tls/service.key --service-account-signing-key-file=/var/lib/rancher/k3s/server/tls/service.current.key --service-cluster-ip-range=10.43.0.0/16 --service-node-port-range=30000-32767 --storage-backend=etcd3 --tls-cert-file=/var/lib/rancher/k3s/server/tls/serving-kube-apiserver.crt --tls-cipher-suites=TLS_ECDHE_ECDSA_WITH_AES_256_GCM_SHA384,TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384,TLS_ECDHE_ECDSA_WITH_AES_128_GCM_SHA256,TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256,TLS_ECDHE_ECDSA_WITH_CHACHA20_POLY1305,TLS_ECDHE_RSA_WITH_CHACHA20_POLY1305 --tls-private-key-file=/var/lib/rancher/k3s/server/tls/serving-kube-apiserver.key"

Remediation:

K3s automatically generates and sets the service account key file. It is located at /var/lib/rancher/k3s/server/tls/service.key. If this check fails, edit K3s config file /etc/rancher/k3s/config.yaml and remove any lines like below.

kube-apiserver-arg:
  - "service-account-key-file=<path>"

1.2.25 Ensure that the --etcd-certfile and --etcd-keyfile arguments are set as appropriate (Automated)

Result: PASS

Audit:

if [ "$(journalctl -u k3s | grep -m1 'Managed etcd cluster' | wc -l)" -gt 0 ]; then
  journalctl -D /var/log/journal -u k3s | grep -m1 'Running kube-apiserver' | tail -n1
else
  echo "--etcd-certfile AND --etcd-keyfile"
fi

Expected Result: '--etcd-certfile' is present AND '--etcd-keyfile' is present

Returned Value:

Aug 09 19:01:28 server-0 k3s[2354]: time="2024-08-09T19:01:28Z" level=info msg="Running kube-apiserver --admission-control-config-file=/var/lib/rancher/k3s/server/psa.yaml --advertise-address=10.10.10.100 --advertise-port=6443 --allow-privileged=true --anonymous-auth=false --api-audiences=https://kubernetes.default.svc.cluster.local,k3s --audit-log-maxage=30 --audit-log-maxbackup=10 --audit-log-maxsize=100 --audit-log-path=/var/lib/rancher/k3s/server/logs/audit.log --audit-policy-file=/var/lib/rancher/k3s/server/audit.yaml --authorization-mode=Node,RBAC --bind-address=127.0.0.1 --cert-dir=/var/lib/rancher/k3s/server/tls/temporary-certs --client-ca-file=/var/lib/rancher/k3s/server/tls/client-ca.crt --egress-selector-config-file=/var/lib/rancher/k3s/server/etc/egress-selector-config.yaml --enable-admission-plugins=NodeRestriction --enable-aggregator-routing=true --enable-bootstrap-token-auth=true --encryption-provider-config=/var/lib/rancher/k3s/server/cred/encryption-config.json --etcd-cafile=/var/lib/rancher/k3s/server/tls/etcd/server-ca.crt --etcd-certfile=/var/lib/rancher/k3s/server/tls/etcd/client.crt --etcd-keyfile=/var/lib/rancher/k3s/server/tls/etcd/client.key --etcd-servers=https://127.0.0.1:2379 --feature-gates=JobTrackingWithFinalizers=true --kubelet-certificate-authority=/var/lib/rancher/k3s/server/tls/server-ca.crt --kubelet-client-certificate=/var/lib/rancher/k3s/server/tls/client-kube-apiserver.crt --kubelet-client-key=/var/lib/rancher/k3s/server/tls/client-kube-apiserver.key --kubelet-preferred-address-types=InternalIP,ExternalIP,Hostname --profiling=false --proxy-client-cert-file=/var/lib/rancher/k3s/server/tls/client-auth-proxy.crt --proxy-client-key-file=/var/lib/rancher/k3s/server/tls/client-auth-proxy.key --requestheader-allowed-names=system:auth-proxy --requestheader-client-ca-file=/var/lib/rancher/k3s/server/tls/request-header-ca.crt --requestheader-extra-headers-prefix=X-Remote-Extra- --requestheader-group-headers=X-Remote-Group --requestheader-username-headers=X-Remote-User --secure-port=6444 --service-account-issuer=https://kubernetes.default.svc.cluster.local --service-account-key-file=/var/lib/rancher/k3s/server/tls/service.key --service-account-signing-key-file=/var/lib/rancher/k3s/server/tls/service.current.key --service-cluster-ip-range=10.43.0.0/16 --service-node-port-range=30000-32767 --storage-backend=etcd3 --tls-cert-file=/var/lib/rancher/k3s/server/tls/serving-kube-apiserver.crt --tls-cipher-suites=TLS_ECDHE_ECDSA_WITH_AES_256_GCM_SHA384,TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384,TLS_ECDHE_ECDSA_WITH_AES_128_GCM_SHA256,TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256,TLS_ECDHE_ECDSA_WITH_CHACHA20_POLY1305,TLS_ECDHE_RSA_WITH_CHACHA20_POLY1305 --tls-private-key-file=/var/lib/rancher/k3s/server/tls/serving-kube-apiserver.key"

Remediation:

K3s automatically generates and sets the etcd certificate and key files. They are located at /var/lib/rancher/k3s/server/tls/etcd/client.crt and /var/lib/rancher/k3s/server/tls/etcd/client.key. If this check fails, edit the K3s config file /etc/rancher/k3s/config.yaml and remove any lines like below.

kube-apiserver-arg:
  - "etcd-certfile=<path>"
  - "etcd-keyfile=<path>"

1.2.26 Ensure that the --tls-cert-file and --tls-private-key-file arguments are set as appropriate (Automated)

Result: PASS

Audit:

journalctl -D /var/log/journal -u k3s | grep -A1 'Running kube-apiserver' | tail -n2

Expected Result: '--tls-cert-file' is present AND '--tls-private-key-file' is present

Returned Value:

Aug 09 19:01:28 server-0 k3s[2354]: time="2024-08-09T19:01:28Z" level=info msg="Running kube-apiserver --admission-control-config-file=/var/lib/rancher/k3s/server/psa.yaml --advertise-address=10.10.10.100 --advertise-port=6443 --allow-privileged=true --anonymous-auth=false --api-audiences=https://kubernetes.default.svc.cluster.local,k3s --audit-log-maxage=30 --audit-log-maxbackup=10 --audit-log-maxsize=100 --audit-log-path=/var/lib/rancher/k3s/server/logs/audit.log --audit-policy-file=/var/lib/rancher/k3s/server/audit.yaml --authorization-mode=Node,RBAC --bind-address=127.0.0.1 --cert-dir=/var/lib/rancher/k3s/server/tls/temporary-certs --client-ca-file=/var/lib/rancher/k3s/server/tls/client-ca.crt --egress-selector-config-file=/var/lib/rancher/k3s/server/etc/egress-selector-config.yaml --enable-admission-plugins=NodeRestriction --enable-aggregator-routing=true --enable-bootstrap-token-auth=true --encryption-provider-config=/var/lib/rancher/k3s/server/cred/encryption-config.json --etcd-cafile=/var/lib/rancher/k3s/server/tls/etcd/server-ca.crt --etcd-certfile=/var/lib/rancher/k3s/server/tls/etcd/client.crt --etcd-keyfile=/var/lib/rancher/k3s/server/tls/etcd/client.key --etcd-servers=https://127.0.0.1:2379 --feature-gates=JobTrackingWithFinalizers=true --kubelet-certificate-authority=/var/lib/rancher/k3s/server/tls/server-ca.crt --kubelet-client-certificate=/var/lib/rancher/k3s/server/tls/client-kube-apiserver.crt --kubelet-client-key=/var/lib/rancher/k3s/server/tls/client-kube-apiserver.key --kubelet-preferred-address-types=InternalIP,ExternalIP,Hostname --profiling=false --proxy-client-cert-file=/var/lib/rancher/k3s/server/tls/client-auth-proxy.crt --proxy-client-key-file=/var/lib/rancher/k3s/server/tls/client-auth-proxy.key --requestheader-allowed-names=system:auth-proxy --requestheader-client-ca-file=/var/lib/rancher/k3s/server/tls/request-header-ca.crt --requestheader-extra-headers-prefix=X-Remote-Extra- --requestheader-group-headers=X-Remote-Group --requestheader-username-headers=X-Remote-User --secure-port=6444 --service-account-issuer=https://kubernetes.default.svc.cluster.local --service-account-key-file=/var/lib/rancher/k3s/server/tls/service.key --service-account-signing-key-file=/var/lib/rancher/k3s/server/tls/service.current.key --service-cluster-ip-range=10.43.0.0/16 --service-node-port-range=30000-32767 --storage-backend=etcd3 --tls-cert-file=/var/lib/rancher/k3s/server/tls/serving-kube-apiserver.crt --tls-cipher-suites=TLS_ECDHE_ECDSA_WITH_AES_256_GCM_SHA384,TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384,TLS_ECDHE_ECDSA_WITH_AES_128_GCM_SHA256,TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256,TLS_ECDHE_ECDSA_WITH_CHACHA20_POLY1305,TLS_ECDHE_RSA_WITH_CHACHA20_POLY1305 --tls-private-key-file=/var/lib/rancher/k3s/server/tls/serving-kube-apiserver.key"
Aug 09 19:01:28 server-0 k3s[2354]: time="2024-08-09T19:01:28Z" level=info msg="Running kube-scheduler --authentication-kubeconfig=/var/lib/rancher/k3s/server/cred/scheduler.kubeconfig --authorization-kubeconfig=/var/lib/rancher/k3s/server/cred/scheduler.kubeconfig --bind-address=127.0.0.1 --kubeconfig=/var/lib/rancher/k3s/server/cred/scheduler.kubeconfig --profiling=false --secure-port=10259"

Remediation:

By default, K3s automatically generates and provides the TLS certificate and private key for the apiserver. They are generated and located at /var/lib/rancher/k3s/server/tls/serving-kube-apiserver.crt and /var/lib/rancher/k3s/server/tls/serving-kube-apiserver.key If this check fails, edit the K3s config file /etc/rancher/k3s/config.yaml and remove any lines like below.

kube-apiserver-arg:
  - "tls-cert-file=<path>"
  - "tls-private-key-file=<path>"

1.2.27 Ensure that the --client-ca-file argument is set as appropriate (Automated)

Result: PASS

Audit:

journalctl -u k3s | grep 'Running kube-apiserver' | tail -n1 | grep 'client-ca-file'

Expected Result: '--client-ca-file' is present

Returned Value:

Aug 09 19:01:28 server-0 k3s[2354]: time="2024-08-09T19:01:28Z" level=info msg="Running kube-apiserver --admission-control-config-file=/var/lib/rancher/k3s/server/psa.yaml --advertise-address=10.10.10.100 --advertise-port=6443 --allow-privileged=true --anonymous-auth=false --api-audiences=https://kubernetes.default.svc.cluster.local,k3s --audit-log-maxage=30 --audit-log-maxbackup=10 --audit-log-maxsize=100 --audit-log-path=/var/lib/rancher/k3s/server/logs/audit.log --audit-policy-file=/var/lib/rancher/k3s/server/audit.yaml --authorization-mode=Node,RBAC --bind-address=127.0.0.1 --cert-dir=/var/lib/rancher/k3s/server/tls/temporary-certs --client-ca-file=/var/lib/rancher/k3s/server/tls/client-ca.crt --egress-selector-config-file=/var/lib/rancher/k3s/server/etc/egress-selector-config.yaml --enable-admission-plugins=NodeRestriction --enable-aggregator-routing=true --enable-bootstrap-token-auth=true --encryption-provider-config=/var/lib/rancher/k3s/server/cred/encryption-config.json --etcd-cafile=/var/lib/rancher/k3s/server/tls/etcd/server-ca.crt --etcd-certfile=/var/lib/rancher/k3s/server/tls/etcd/client.crt --etcd-keyfile=/var/lib/rancher/k3s/server/tls/etcd/client.key --etcd-servers=https://127.0.0.1:2379 --feature-gates=JobTrackingWithFinalizers=true --kubelet-certificate-authority=/var/lib/rancher/k3s/server/tls/server-ca.crt --kubelet-client-certificate=/var/lib/rancher/k3s/server/tls/client-kube-apiserver.crt --kubelet-client-key=/var/lib/rancher/k3s/server/tls/client-kube-apiserver.key --kubelet-preferred-address-types=InternalIP,ExternalIP,Hostname --profiling=false --proxy-client-cert-file=/var/lib/rancher/k3s/server/tls/client-auth-proxy.crt --proxy-client-key-file=/var/lib/rancher/k3s/server/tls/client-auth-proxy.key --requestheader-allowed-names=system:auth-proxy --requestheader-client-ca-file=/var/lib/rancher/k3s/server/tls/request-header-ca.crt --requestheader-extra-headers-prefix=X-Remote-Extra- --requestheader-group-headers=X-Remote-Group --requestheader-username-headers=X-Remote-User --secure-port=6444 --service-account-issuer=https://kubernetes.default.svc.cluster.local --service-account-key-file=/var/lib/rancher/k3s/server/tls/service.key --service-account-signing-key-file=/var/lib/rancher/k3s/server/tls/service.current.key --service-cluster-ip-range=10.43.0.0/16 --service-node-port-range=30000-32767 --storage-backend=etcd3 --tls-cert-file=/var/lib/rancher/k3s/server/tls/serving-kube-apiserver.crt --tls-cipher-suites=TLS_ECDHE_ECDSA_WITH_AES_256_GCM_SHA384,TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384,TLS_ECDHE_ECDSA_WITH_AES_128_GCM_SHA256,TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256,TLS_ECDHE_ECDSA_WITH_CHACHA20_POLY1305,TLS_ECDHE_RSA_WITH_CHACHA20_POLY1305 --tls-private-key-file=/var/lib/rancher/k3s/server/tls/serving-kube-apiserver.key"

Remediation:

By default, K3s automatically provides the client certificate authority file. It is generated and located at /var/lib/rancher/k3s/server/tls/client-ca.crt. If this check fails, edit the K3s config file /etc/rancher/k3s/config.yaml and remove any lines like below.

kube-apiserver-arg:
  - "client-ca-file=<path>"

1.2.28 Ensure that the --etcd-cafile argument is set as appropriate (Automated)

Result: PASS

Audit:

journalctl -u k3s | grep 'Running kube-apiserver' | tail -n1 | grep 'etcd-cafile'

Expected Result: '--etcd-cafile' is present

Returned Value:

Aug 09 19:01:28 server-0 k3s[2354]: time="2024-08-09T19:01:28Z" level=info msg="Running kube-apiserver --admission-control-config-file=/var/lib/rancher/k3s/server/psa.yaml --advertise-address=10.10.10.100 --advertise-port=6443 --allow-privileged=true --anonymous-auth=false --api-audiences=https://kubernetes.default.svc.cluster.local,k3s --audit-log-maxage=30 --audit-log-maxbackup=10 --audit-log-maxsize=100 --audit-log-path=/var/lib/rancher/k3s/server/logs/audit.log --audit-policy-file=/var/lib/rancher/k3s/server/audit.yaml --authorization-mode=Node,RBAC --bind-address=127.0.0.1 --cert-dir=/var/lib/rancher/k3s/server/tls/temporary-certs --client-ca-file=/var/lib/rancher/k3s/server/tls/client-ca.crt --egress-selector-config-file=/var/lib/rancher/k3s/server/etc/egress-selector-config.yaml --enable-admission-plugins=NodeRestriction --enable-aggregator-routing=true --enable-bootstrap-token-auth=true --encryption-provider-config=/var/lib/rancher/k3s/server/cred/encryption-config.json --etcd-cafile=/var/lib/rancher/k3s/server/tls/etcd/server-ca.crt --etcd-certfile=/var/lib/rancher/k3s/server/tls/etcd/client.crt --etcd-keyfile=/var/lib/rancher/k3s/server/tls/etcd/client.key --etcd-servers=https://127.0.0.1:2379 --feature-gates=JobTrackingWithFinalizers=true --kubelet-certificate-authority=/var/lib/rancher/k3s/server/tls/server-ca.crt --kubelet-client-certificate=/var/lib/rancher/k3s/server/tls/client-kube-apiserver.crt --kubelet-client-key=/var/lib/rancher/k3s/server/tls/client-kube-apiserver.key --kubelet-preferred-address-types=InternalIP,ExternalIP,Hostname --profiling=false --proxy-client-cert-file=/var/lib/rancher/k3s/server/tls/client-auth-proxy.crt --proxy-client-key-file=/var/lib/rancher/k3s/server/tls/client-auth-proxy.key --requestheader-allowed-names=system:auth-proxy --requestheader-client-ca-file=/var/lib/rancher/k3s/server/tls/request-header-ca.crt --requestheader-extra-headers-prefix=X-Remote-Extra- --requestheader-group-headers=X-Remote-Group --requestheader-username-headers=X-Remote-User --secure-port=6444 --service-account-issuer=https://kubernetes.default.svc.cluster.local --service-account-key-file=/var/lib/rancher/k3s/server/tls/service.key --service-account-signing-key-file=/var/lib/rancher/k3s/server/tls/service.current.key --service-cluster-ip-range=10.43.0.0/16 --service-node-port-range=30000-32767 --storage-backend=etcd3 --tls-cert-file=/var/lib/rancher/k3s/server/tls/serving-kube-apiserver.crt --tls-cipher-suites=TLS_ECDHE_ECDSA_WITH_AES_256_GCM_SHA384,TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384,TLS_ECDHE_ECDSA_WITH_AES_128_GCM_SHA256,TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256,TLS_ECDHE_ECDSA_WITH_CHACHA20_POLY1305,TLS_ECDHE_RSA_WITH_CHACHA20_POLY1305 --tls-private-key-file=/var/lib/rancher/k3s/server/tls/serving-kube-apiserver.key"

Remediation:

By default, K3s automatically provides the etcd certificate authority file. It is generated and located at /var/lib/rancher/k3s/server/tls/client-ca.crt. If this check fails, edit the K3s config file /etc/rancher/k3s/config.yaml and remove any lines like below.

kube-apiserver-arg:
  - "etcd-cafile=<path>"

1.2.29 Ensure that the --encryption-provider-config argument is set as appropriate (Manual)

Result: PASS

Audit:

journalctl -u k3s | grep 'Running kube-apiserver' | tail -n1 | grep 'encryption-provider-config'

Expected Result: '--encryption-provider-config' is present

Returned Value:

Aug 09 19:01:28 server-0 k3s[2354]: time="2024-08-09T19:01:28Z" level=info msg="Running kube-apiserver --admission-control-config-file=/var/lib/rancher/k3s/server/psa.yaml --advertise-address=10.10.10.100 --advertise-port=6443 --allow-privileged=true --anonymous-auth=false --api-audiences=https://kubernetes.default.svc.cluster.local,k3s --audit-log-maxage=30 --audit-log-maxbackup=10 --audit-log-maxsize=100 --audit-log-path=/var/lib/rancher/k3s/server/logs/audit.log --audit-policy-file=/var/lib/rancher/k3s/server/audit.yaml --authorization-mode=Node,RBAC --bind-address=127.0.0.1 --cert-dir=/var/lib/rancher/k3s/server/tls/temporary-certs --client-ca-file=/var/lib/rancher/k3s/server/tls/client-ca.crt --egress-selector-config-file=/var/lib/rancher/k3s/server/etc/egress-selector-config.yaml --enable-admission-plugins=NodeRestriction --enable-aggregator-routing=true --enable-bootstrap-token-auth=true --encryption-provider-config=/var/lib/rancher/k3s/server/cred/encryption-config.json --etcd-cafile=/var/lib/rancher/k3s/server/tls/etcd/server-ca.crt --etcd-certfile=/var/lib/rancher/k3s/server/tls/etcd/client.crt --etcd-keyfile=/var/lib/rancher/k3s/server/tls/etcd/client.key --etcd-servers=https://127.0.0.1:2379 --feature-gates=JobTrackingWithFinalizers=true --kubelet-certificate-authority=/var/lib/rancher/k3s/server/tls/server-ca.crt --kubelet-client-certificate=/var/lib/rancher/k3s/server/tls/client-kube-apiserver.crt --kubelet-client-key=/var/lib/rancher/k3s/server/tls/client-kube-apiserver.key --kubelet-preferred-address-types=InternalIP,ExternalIP,Hostname --profiling=false --proxy-client-cert-file=/var/lib/rancher/k3s/server/tls/client-auth-proxy.crt --proxy-client-key-file=/var/lib/rancher/k3s/server/tls/client-auth-proxy.key --requestheader-allowed-names=system:auth-proxy --requestheader-client-ca-file=/var/lib/rancher/k3s/server/tls/request-header-ca.crt --requestheader-extra-headers-prefix=X-Remote-Extra- --requestheader-group-headers=X-Remote-Group --requestheader-username-headers=X-Remote-User --secure-port=6444 --service-account-issuer=https://kubernetes.default.svc.cluster.local --service-account-key-file=/var/lib/rancher/k3s/server/tls/service.key --service-account-signing-key-file=/var/lib/rancher/k3s/server/tls/service.current.key --service-cluster-ip-range=10.43.0.0/16 --service-node-port-range=30000-32767 --storage-backend=etcd3 --tls-cert-file=/var/lib/rancher/k3s/server/tls/serving-kube-apiserver.crt --tls-cipher-suites=TLS_ECDHE_ECDSA_WITH_AES_256_GCM_SHA384,TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384,TLS_ECDHE_ECDSA_WITH_AES_128_GCM_SHA256,TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256,TLS_ECDHE_ECDSA_WITH_CHACHA20_POLY1305,TLS_ECDHE_RSA_WITH_CHACHA20_POLY1305 --tls-private-key-file=/var/lib/rancher/k3s/server/tls/serving-kube-apiserver.key"

Remediation:

K3s can be configured to use encryption providers to encrypt secrets at rest. Edit the K3s config file /etc/rancher/k3s/config.yaml on the control plane node and set the below parameter. secrets-encryption: true Secrets encryption can then be managed with the k3s secrets-encrypt command line tool. If needed, you can find the generated encryption config at /var/lib/rancher/k3s/server/cred/encryption-config.json.

1.2.30 Ensure that encryption providers are appropriately configured (Manual)

Result: PASS

Audit:

ENCRYPTION_PROVIDER_CONFIG=$(journalctl -u k3s | grep 'Running kube-apiserver' | tail -n1 | grep -- --encryption-provider-config | sed 's%.*encryption-provider-config[= ]\([^ ]*\).*%\1%')
if test -e $ENCRYPTION_PROVIDER_CONFIG; then grep -o 'providers\"\:\[.*\]' $ENCRYPTION_PROVIDER_CONFIG | grep -o "[A-Za-z]*" | head -2 | tail -1  | sed 's/^/provider=/'; fi

Expected Result: 'provider' contains valid elements from 'aescbc,kms,secretbox'

Returned Value:

provider=aescbc

Remediation:

K3s can be configured to use encryption providers to encrypt secrets at rest. K3s will utilize the aescbc provider. Edit the K3s config file /etc/rancher/k3s/config.yaml on the control plane node and set the below parameter. secrets-encryption: true Secrets encryption can then be managed with the k3s secrets-encrypt command line tool. If needed, you can find the generated encryption config at /var/lib/rancher/k3s/server/cred/encryption-config.json

1.2.31 Ensure that the API Server only makes use of Strong Cryptographic Ciphers (Automated)

Result: PASS

Audit:

journalctl -D /var/log/journal -u k3s | grep 'Running kube-apiserver' | tail -n1 | grep 'tls-cipher-suites'

Expected Result: '--tls-cipher-suites' contains valid elements from 'TLS_AES_128_GCM_SHA256,TLS_AES_256_GCM_SHA384,TLS_CHACHA20_POLY1305_SHA256,TLS_ECDHE_ECDSA_WITH_AES_128_CBC_SHA,TLS_ECDHE_ECDSA_WITH_AES_128_GCM_SHA256,TLS_ECDHE_ECDSA_WITH_AES_256_CBC_SHA,TLS_ECDHE_ECDSA_WITH_AES_256_GCM_SHA384,TLS_ECDHE_ECDSA_WITH_CHACHA20_POLY1305,TLS_ECDHE_ECDSA_WITH_CHACHA20_POLY1305_SHA256,TLS_ECDHE_RSA_WITH_3DES_EDE_CBC_SHA,TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA,TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256,TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA,TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384,TLS_ECDHE_RSA_WITH_CHACHA20_POLY1305,TLS_ECDHE_RSA_WITH_CHACHA20_POLY1305_SHA256,TLS_RSA_WITH_3DES_EDE_CBC_SHA,TLS_RSA_WITH_AES_128_CBC_SHA,TLS_RSA_WITH_AES_128_GCM_SHA256,TLS_RSA_WITH_AES_256_CBC_SHA,TLS_RSA_WITH_AES_256_GCM_SHA384'

Returned Value:

Aug 09 19:01:28 server-0 k3s[2354]: time="2024-08-09T19:01:28Z" level=info msg="Running kube-apiserver --admission-control-config-file=/var/lib/rancher/k3s/server/psa.yaml --advertise-address=10.10.10.100 --advertise-port=6443 --allow-privileged=true --anonymous-auth=false --api-audiences=https://kubernetes.default.svc.cluster.local,k3s --audit-log-maxage=30 --audit-log-maxbackup=10 --audit-log-maxsize=100 --audit-log-path=/var/lib/rancher/k3s/server/logs/audit.log --audit-policy-file=/var/lib/rancher/k3s/server/audit.yaml --authorization-mode=Node,RBAC --bind-address=127.0.0.1 --cert-dir=/var/lib/rancher/k3s/server/tls/temporary-certs --client-ca-file=/var/lib/rancher/k3s/server/tls/client-ca.crt --egress-selector-config-file=/var/lib/rancher/k3s/server/etc/egress-selector-config.yaml --enable-admission-plugins=NodeRestriction --enable-aggregator-routing=true --enable-bootstrap-token-auth=true --encryption-provider-config=/var/lib/rancher/k3s/server/cred/encryption-config.json --etcd-cafile=/var/lib/rancher/k3s/server/tls/etcd/server-ca.crt --etcd-certfile=/var/lib/rancher/k3s/server/tls/etcd/client.crt --etcd-keyfile=/var/lib/rancher/k3s/server/tls/etcd/client.key --etcd-servers=https://127.0.0.1:2379 --feature-gates=JobTrackingWithFinalizers=true --kubelet-certificate-authority=/var/lib/rancher/k3s/server/tls/server-ca.crt --kubelet-client-certificate=/var/lib/rancher/k3s/server/tls/client-kube-apiserver.crt --kubelet-client-key=/var/lib/rancher/k3s/server/tls/client-kube-apiserver.key --kubelet-preferred-address-types=InternalIP,ExternalIP,Hostname --profiling=false --proxy-client-cert-file=/var/lib/rancher/k3s/server/tls/client-auth-proxy.crt --proxy-client-key-file=/var/lib/rancher/k3s/server/tls/client-auth-proxy.key --requestheader-allowed-names=system:auth-proxy --requestheader-client-ca-file=/var/lib/rancher/k3s/server/tls/request-header-ca.crt --requestheader-extra-headers-prefix=X-Remote-Extra- --requestheader-group-headers=X-Remote-Group --requestheader-username-headers=X-Remote-User --secure-port=6444 --service-account-issuer=https://kubernetes.default.svc.cluster.local --service-account-key-file=/var/lib/rancher/k3s/server/tls/service.key --service-account-signing-key-file=/var/lib/rancher/k3s/server/tls/service.current.key --service-cluster-ip-range=10.43.0.0/16 --service-node-port-range=30000-32767 --storage-backend=etcd3 --tls-cert-file=/var/lib/rancher/k3s/server/tls/serving-kube-apiserver.crt --tls-cipher-suites=TLS_ECDHE_ECDSA_WITH_AES_256_GCM_SHA384,TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384,TLS_ECDHE_ECDSA_WITH_AES_128_GCM_SHA256,TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256,TLS_ECDHE_ECDSA_WITH_CHACHA20_POLY1305,TLS_ECDHE_RSA_WITH_CHACHA20_POLY1305 --tls-private-key-file=/var/lib/rancher/k3s/server/tls/serving-kube-apiserver.key"

Remediation:

By default, the K3s kube-apiserver complies with this test. Changes to these values may cause regression, therefore ensure that all apiserver clients support the new TLS configuration before applying it in production deployments. If a custom TLS configuration is required, consider also creating a custom version of this rule that aligns with your requirements. If this check fails, remove any custom configuration around tls-cipher-suites or update the /etc/rancher/k3s/config.yaml file to match the default by adding the following:

kube-apiserver-arg:
  - "tls-cipher-suites=TLS_ECDHE_ECDSA_WITH_AES_256_GCM_SHA384,TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384,TLS_ECDHE_ECDSA_WITH_AES_128_GCM_SHA256,TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256,TLS_ECDHE_ECDSA_WITH_CHACHA20_POLY1305,TLS_ECDHE_RSA_WITH_CHACHA20_POLY1305"

1.3 Controller Manager

1.3.1 Ensure that the --terminated-pod-gc-threshold argument is set as appropriate (Manual)

Result: PASS

Audit:

journalctl -u k3s | grep 'Running kube-controller-manager' | tail -n1 | grep 'terminated-pod-gc-threshold'

Expected Result: '--terminated-pod-gc-threshold' is present

Returned Value:

Aug 09 19:01:28 server-0 k3s[2354]: time="2024-08-09T19:01:28Z" level=info msg="Running kube-controller-manager --allocate-node-cidrs=true --authentication-kubeconfig=/var/lib/rancher/k3s/server/cred/controller.kubeconfig --authorization-kubeconfig=/var/lib/rancher/k3s/server/cred/controller.kubeconfig --bind-address=127.0.0.1 --cluster-cidr=10.42.0.0/16 --cluster-signing-kube-apiserver-client-cert-file=/var/lib/rancher/k3s/server/tls/client-ca.nochain.crt --cluster-signing-kube-apiserver-client-key-file=/var/lib/rancher/k3s/server/tls/client-ca.key --cluster-signing-kubelet-client-cert-file=/var/lib/rancher/k3s/server/tls/client-ca.nochain.crt --cluster-signing-kubelet-client-key-file=/var/lib/rancher/k3s/server/tls/client-ca.key --cluster-signing-kubelet-serving-cert-file=/var/lib/rancher/k3s/server/tls/server-ca.nochain.crt --cluster-signing-kubelet-serving-key-file=/var/lib/rancher/k3s/server/tls/server-ca.key --cluster-signing-legacy-unknown-cert-file=/var/lib/rancher/k3s/server/tls/server-ca.nochain.crt --cluster-signing-legacy-unknown-key-file=/var/lib/rancher/k3s/server/tls/server-ca.key --configure-cloud-routes=false --controllers=*,tokencleaner,-service,-route,-cloud-node-lifecycle --feature-gates=JobTrackingWithFinalizers=true --kubeconfig=/var/lib/rancher/k3s/server/cred/controller.kubeconfig --profiling=false --root-ca-file=/var/lib/rancher/k3s/server/tls/server-ca.crt --secure-port=10257 --service-account-private-key-file=/var/lib/rancher/k3s/server/tls/service.current.key --service-cluster-ip-range=10.43.0.0/16 --terminated-pod-gc-threshold=10 --use-service-account-credentials=true"

Remediation:

Edit the K3s config file /etc/rancher/k3s/config.yaml on the control plane node and set the --terminated-pod-gc-threshold to an appropriate threshold,

kube-controller-manager-arg:
  - "terminated-pod-gc-threshold=10"

1.3.2 Ensure that the --profiling argument is set to false (Automated)

Result: PASS

Audit:

journalctl -u k3s | grep 'Running kube-controller-manager' | tail -n1 | grep 'profiling'

Expected Result: '--profiling' is equal to 'false'

Returned Value:

Aug 09 19:01:28 server-0 k3s[2354]: time="2024-08-09T19:01:28Z" level=info msg="Running kube-controller-manager --allocate-node-cidrs=true --authentication-kubeconfig=/var/lib/rancher/k3s/server/cred/controller.kubeconfig --authorization-kubeconfig=/var/lib/rancher/k3s/server/cred/controller.kubeconfig --bind-address=127.0.0.1 --cluster-cidr=10.42.0.0/16 --cluster-signing-kube-apiserver-client-cert-file=/var/lib/rancher/k3s/server/tls/client-ca.nochain.crt --cluster-signing-kube-apiserver-client-key-file=/var/lib/rancher/k3s/server/tls/client-ca.key --cluster-signing-kubelet-client-cert-file=/var/lib/rancher/k3s/server/tls/client-ca.nochain.crt --cluster-signing-kubelet-client-key-file=/var/lib/rancher/k3s/server/tls/client-ca.key --cluster-signing-kubelet-serving-cert-file=/var/lib/rancher/k3s/server/tls/server-ca.nochain.crt --cluster-signing-kubelet-serving-key-file=/var/lib/rancher/k3s/server/tls/server-ca.key --cluster-signing-legacy-unknown-cert-file=/var/lib/rancher/k3s/server/tls/server-ca.nochain.crt --cluster-signing-legacy-unknown-key-file=/var/lib/rancher/k3s/server/tls/server-ca.key --configure-cloud-routes=false --controllers=*,tokencleaner,-service,-route,-cloud-node-lifecycle --feature-gates=JobTrackingWithFinalizers=true --kubeconfig=/var/lib/rancher/k3s/server/cred/controller.kubeconfig --profiling=false --root-ca-file=/var/lib/rancher/k3s/server/tls/server-ca.crt --secure-port=10257 --service-account-private-key-file=/var/lib/rancher/k3s/server/tls/service.current.key --service-cluster-ip-range=10.43.0.0/16 --terminated-pod-gc-threshold=10 --use-service-account-credentials=true"

Remediation:

By default, K3s sets the --profiling argument to false. If this check fails, edit the K3s config file /etc/rancher/k3s/config.yaml and remove any lines like below.

kube-controller-manager-arg:
  - "profiling=true"

1.3.3 Ensure that the --use-service-account-credentials argument is set to true (Automated)

Result: PASS

Audit:

journalctl -u k3s | grep 'Running kube-controller-manager' | tail -n1 | grep 'use-service-account-credentials'

Expected Result: '--use-service-account-credentials' is not equal to 'false'

Returned Value:

Aug 09 19:01:28 server-0 k3s[2354]: time="2024-08-09T19:01:28Z" level=info msg="Running kube-controller-manager --allocate-node-cidrs=true --authentication-kubeconfig=/var/lib/rancher/k3s/server/cred/controller.kubeconfig --authorization-kubeconfig=/var/lib/rancher/k3s/server/cred/controller.kubeconfig --bind-address=127.0.0.1 --cluster-cidr=10.42.0.0/16 --cluster-signing-kube-apiserver-client-cert-file=/var/lib/rancher/k3s/server/tls/client-ca.nochain.crt --cluster-signing-kube-apiserver-client-key-file=/var/lib/rancher/k3s/server/tls/client-ca.key --cluster-signing-kubelet-client-cert-file=/var/lib/rancher/k3s/server/tls/client-ca.nochain.crt --cluster-signing-kubelet-client-key-file=/var/lib/rancher/k3s/server/tls/client-ca.key --cluster-signing-kubelet-serving-cert-file=/var/lib/rancher/k3s/server/tls/server-ca.nochain.crt --cluster-signing-kubelet-serving-key-file=/var/lib/rancher/k3s/server/tls/server-ca.key --cluster-signing-legacy-unknown-cert-file=/var/lib/rancher/k3s/server/tls/server-ca.nochain.crt --cluster-signing-legacy-unknown-key-file=/var/lib/rancher/k3s/server/tls/server-ca.key --configure-cloud-routes=false --controllers=*,tokencleaner,-service,-route,-cloud-node-lifecycle --feature-gates=JobTrackingWithFinalizers=true --kubeconfig=/var/lib/rancher/k3s/server/cred/controller.kubeconfig --profiling=false --root-ca-file=/var/lib/rancher/k3s/server/tls/server-ca.crt --secure-port=10257 --service-account-private-key-file=/var/lib/rancher/k3s/server/tls/service.current.key --service-cluster-ip-range=10.43.0.0/16 --terminated-pod-gc-threshold=10 --use-service-account-credentials=true"

Remediation:

By default, K3s sets the --use-service-account-credentials argument to true. If this check fails, edit the K3s config file /etc/rancher/k3s/config.yaml and remove any lines like below.

kube-controller-manager-arg:
  - "use-service-account-credentials=false"

1.3.4 Ensure that the --service-account-private-key-file argument is set as appropriate (Automated)

Result: PASS

Audit:

journalctl -u k3s | grep 'Running kube-controller-manager' | tail -n1 | grep 'service-account-private-key-file'

Expected Result: '--service-account-private-key-file' is present

Returned Value:

Aug 09 19:01:28 server-0 k3s[2354]: time="2024-08-09T19:01:28Z" level=info msg="Running kube-controller-manager --allocate-node-cidrs=true --authentication-kubeconfig=/var/lib/rancher/k3s/server/cred/controller.kubeconfig --authorization-kubeconfig=/var/lib/rancher/k3s/server/cred/controller.kubeconfig --bind-address=127.0.0.1 --cluster-cidr=10.42.0.0/16 --cluster-signing-kube-apiserver-client-cert-file=/var/lib/rancher/k3s/server/tls/client-ca.nochain.crt --cluster-signing-kube-apiserver-client-key-file=/var/lib/rancher/k3s/server/tls/client-ca.key --cluster-signing-kubelet-client-cert-file=/var/lib/rancher/k3s/server/tls/client-ca.nochain.crt --cluster-signing-kubelet-client-key-file=/var/lib/rancher/k3s/server/tls/client-ca.key --cluster-signing-kubelet-serving-cert-file=/var/lib/rancher/k3s/server/tls/server-ca.nochain.crt --cluster-signing-kubelet-serving-key-file=/var/lib/rancher/k3s/server/tls/server-ca.key --cluster-signing-legacy-unknown-cert-file=/var/lib/rancher/k3s/server/tls/server-ca.nochain.crt --cluster-signing-legacy-unknown-key-file=/var/lib/rancher/k3s/server/tls/server-ca.key --configure-cloud-routes=false --controllers=*,tokencleaner,-service,-route,-cloud-node-lifecycle --feature-gates=JobTrackingWithFinalizers=true --kubeconfig=/var/lib/rancher/k3s/server/cred/controller.kubeconfig --profiling=false --root-ca-file=/var/lib/rancher/k3s/server/tls/server-ca.crt --secure-port=10257 --service-account-private-key-file=/var/lib/rancher/k3s/server/tls/service.current.key --service-cluster-ip-range=10.43.0.0/16 --terminated-pod-gc-threshold=10 --use-service-account-credentials=true"

Remediation:

By default, K3s automatically provides the service account private key file. It is generated and located at /var/lib/rancher/k3s/server/tls/service.current.key. If this check fails, edit the K3s config file /etc/rancher/k3s/config.yaml and remove any lines like below.

kube-controller-manager-arg:
  - "service-account-private-key-file=<path>"

1.3.5 Ensure that the --root-ca-file argument is set as appropriate (Automated)

Result: PASS

Audit:

journalctl -u k3s | grep 'Running kube-controller-manager' | tail -n1 | grep 'root-ca-file'

Expected Result: '--root-ca-file' is present

Returned Value:

Aug 09 19:01:28 server-0 k3s[2354]: time="2024-08-09T19:01:28Z" level=info msg="Running kube-controller-manager --allocate-node-cidrs=true --authentication-kubeconfig=/var/lib/rancher/k3s/server/cred/controller.kubeconfig --authorization-kubeconfig=/var/lib/rancher/k3s/server/cred/controller.kubeconfig --bind-address=127.0.0.1 --cluster-cidr=10.42.0.0/16 --cluster-signing-kube-apiserver-client-cert-file=/var/lib/rancher/k3s/server/tls/client-ca.nochain.crt --cluster-signing-kube-apiserver-client-key-file=/var/lib/rancher/k3s/server/tls/client-ca.key --cluster-signing-kubelet-client-cert-file=/var/lib/rancher/k3s/server/tls/client-ca.nochain.crt --cluster-signing-kubelet-client-key-file=/var/lib/rancher/k3s/server/tls/client-ca.key --cluster-signing-kubelet-serving-cert-file=/var/lib/rancher/k3s/server/tls/server-ca.nochain.crt --cluster-signing-kubelet-serving-key-file=/var/lib/rancher/k3s/server/tls/server-ca.key --cluster-signing-legacy-unknown-cert-file=/var/lib/rancher/k3s/server/tls/server-ca.nochain.crt --cluster-signing-legacy-unknown-key-file=/var/lib/rancher/k3s/server/tls/server-ca.key --configure-cloud-routes=false --controllers=*,tokencleaner,-service,-route,-cloud-node-lifecycle --feature-gates=JobTrackingWithFinalizers=true --kubeconfig=/var/lib/rancher/k3s/server/cred/controller.kubeconfig --profiling=false --root-ca-file=/var/lib/rancher/k3s/server/tls/server-ca.crt --secure-port=10257 --service-account-private-key-file=/var/lib/rancher/k3s/server/tls/service.current.key --service-cluster-ip-range=10.43.0.0/16 --terminated-pod-gc-threshold=10 --use-service-account-credentials=true"

Remediation:

By default, K3s automatically provides the root CA file. It is generated and located at /var/lib/rancher/k3s/server/tls/server-ca.crt. If this check fails, edit the K3s config file /etc/rancher/k3s/config.yaml and remove any lines like below.

kube-controller-manager-arg:
  - "root-ca-file=<path>"

1.3.6 Ensure that the RotateKubeletServerCertificate argument is set to true (Automated)

Result: PASS

Audit:

journalctl -u k3s | grep 'Running kube-controller-manager' | tail -n1

Expected Result: '--feature-gates' does not have 'RotateKubeletServerCertificate=false' OR '--feature-gates' is not present

Returned Value:

Aug 09 19:01:28 server-0 k3s[2354]: time="2024-08-09T19:01:28Z" level=info msg="Running kube-controller-manager --allocate-node-cidrs=true --authentication-kubeconfig=/var/lib/rancher/k3s/server/cred/controller.kubeconfig --authorization-kubeconfig=/var/lib/rancher/k3s/server/cred/controller.kubeconfig --bind-address=127.0.0.1 --cluster-cidr=10.42.0.0/16 --cluster-signing-kube-apiserver-client-cert-file=/var/lib/rancher/k3s/server/tls/client-ca.nochain.crt --cluster-signing-kube-apiserver-client-key-file=/var/lib/rancher/k3s/server/tls/client-ca.key --cluster-signing-kubelet-client-cert-file=/var/lib/rancher/k3s/server/tls/client-ca.nochain.crt --cluster-signing-kubelet-client-key-file=/var/lib/rancher/k3s/server/tls/client-ca.key --cluster-signing-kubelet-serving-cert-file=/var/lib/rancher/k3s/server/tls/server-ca.nochain.crt --cluster-signing-kubelet-serving-key-file=/var/lib/rancher/k3s/server/tls/server-ca.key --cluster-signing-legacy-unknown-cert-file=/var/lib/rancher/k3s/server/tls/server-ca.nochain.crt --cluster-signing-legacy-unknown-key-file=/var/lib/rancher/k3s/server/tls/server-ca.key --configure-cloud-routes=false --controllers=*,tokencleaner,-service,-route,-cloud-node-lifecycle --feature-gates=JobTrackingWithFinalizers=true --kubeconfig=/var/lib/rancher/k3s/server/cred/controller.kubeconfig --profiling=false --root-ca-file=/var/lib/rancher/k3s/server/tls/server-ca.crt --secure-port=10257 --service-account-private-key-file=/var/lib/rancher/k3s/server/tls/service.current.key --service-cluster-ip-range=10.43.0.0/16 --terminated-pod-gc-threshold=10 --use-service-account-credentials=true"

Remediation:

By default, K3s does not set the RotateKubeletServerCertificate feature gate. If you have enabled this feature gate, you should remove it. If this check fails, edit the K3s config file /etc/rancher/k3s/config.yaml, remove any lines like below.

kube-controller-manager-arg:
  - "feature-gate=RotateKubeletServerCertificate"

1.3.7 Ensure that the --bind-address argument is set to 127.0.0.1 (Automated)

Result: PASS

Audit:

/bin/ps -ef | grep containerd | grep -v grep

Expected Result: '--bind-address' is present OR '--bind-address' is not present

Returned Value:

root        2372    2354  4 19:01 ?        00:00:05 containerd -c /var/lib/rancher/k3s/agent/etc/containerd/config.toml -a /run/k3s/containerd/containerd.sock --state /run/k3s/containerd --root /var/lib/rancher/k3s/agent/containerd
root        3128       1  0 19:01 ?        00:00:00 /var/lib/rancher/k3s/data/0f1a87835be3817408b496b439fddb9ea54cab4298db472792bb1b1cbdc210bc/bin/containerd-shim-runc-v2 -namespace k8s.io -id 878d74b0d77d904ec40cd1db71956f2edeb68ab420227a5a42e6d25f249a140a -address /run/k3s/containerd/containerd.sock
root        3239       1  0 19:01 ?        00:00:00 /var/lib/rancher/k3s/data/0f1a87835be3817408b496b439fddb9ea54cab4298db472792bb1b1cbdc210bc/bin/containerd-shim-runc-v2 -namespace k8s.io -id d00cc363af40aee36210e396597e4c02712ae99535be21d204849dc33a22af88 -address /run/k3s/containerd/containerd.sock
root        3293       1  0 19:01 ?        00:00:00 /var/lib/rancher/k3s/data/0f1a87835be3817408b496b439fddb9ea54cab4298db472792bb1b1cbdc210bc/bin/containerd-shim-runc-v2 -namespace k8s.io -id 5df076fa9547c555a2231b9a9a7cbb44021eaa1ab68c9b59b13da960697143f6 -address /run/k3s/containerd/containerd.sock
root        4557       1  0 19:02 ?        00:00:00 /var/lib/rancher/k3s/data/0f1a87835be3817408b496b439fddb9ea54cab4298db472792bb1b1cbdc210bc/bin/containerd-shim-runc-v2 -namespace k8s.io -id f6483b71bcb7ea23356003921a7d90cf638b8f9e473728f3b28dc67163e0fa2d -address /run/k3s/containerd/containerd.sock
root        4644       1  0 19:02 ?        00:00:00 /var/lib/rancher/k3s/data/0f1a87835be3817408b496b439fddb9ea54cab4298db472792bb1b1cbdc210bc/bin/containerd-shim-runc-v2 -namespace k8s.io -id 4d8ceb2620c4e0501a49dc9192fc56d035e76bc79a2c6072fee8619730006233 -address /run/k3s/containerd/containerd.sock

Remediation:

By default, K3s sets the --bind-address argument to 127.0.0.1 If this check fails, edit the K3s config file /etc/rancher/k3s/config.yaml and remove any lines like below.

kube-controller-manager-arg:
  - "bind-address=<IP>"

1.4 Scheduler

1.4.1 Ensure that the --profiling argument is set to false (Automated)

Result: PASS

Audit:

journalctl -D /var/log/journal -u k3s | grep 'Running kube-scheduler' | tail -n1

Expected Result: '--profiling' is equal to 'false'

Returned Value:

Aug 09 19:01:28 server-0 k3s[2354]: time="2024-08-09T19:01:28Z" level=info msg="Running kube-scheduler --authentication-kubeconfig=/var/lib/rancher/k3s/server/cred/scheduler.kubeconfig --authorization-kubeconfig=/var/lib/rancher/k3s/server/cred/scheduler.kubeconfig --bind-address=127.0.0.1 --kubeconfig=/var/lib/rancher/k3s/server/cred/scheduler.kubeconfig --profiling=false --secure-port=10259"

Remediation:

By default, K3s sets the --profiling argument to false. If this check fails, edit the K3s config file /etc/rancher/k3s/config.yaml and remove any lines like below.

kube-scheduler-arg:
  - "profiling=true"

1.4.2 Ensure that the --bind-address argument is set to 127.0.0.1 (Automated)

Result: PASS

Audit:

journalctl -u k3s | grep 'Running kube-scheduler' | tail -n1 | grep 'bind-address'

Expected Result: '--bind-address' is equal to '127.0.0.1' OR '--bind-address' is not present

Returned Value:

Aug 09 19:01:28 server-0 k3s[2354]: time="2024-08-09T19:01:28Z" level=info msg="Running kube-scheduler --authentication-kubeconfig=/var/lib/rancher/k3s/server/cred/scheduler.kubeconfig --authorization-kubeconfig=/var/lib/rancher/k3s/server/cred/scheduler.kubeconfig --bind-address=127.0.0.1 --kubeconfig=/var/lib/rancher/k3s/server/cred/scheduler.kubeconfig --profiling=false --secure-port=10259"

Remediation:

By default, K3s sets the --bind-address argument to 127.0.0.1 If this check fails, edit the K3s config file /etc/rancher/k3s/config.yaml and remove any lines like below.

kube-scheduler-arg:
  - "bind-address=<IP>"

2 Etcd Node Configuration

2.1 Ensure that the --cert-file and --key-file arguments are set as appropriate (Automated)

Result: PASS

Audit:

Expected Result: '.client-transport-security.cert-file' is equal to '/var/lib/rancher/k3s/server/tls/etcd/server-client.crt' AND '.client-transport-security.key-file' is equal to '/var/lib/rancher/k3s/server/tls/etcd/server-client.key'

Returned Value:

advertise-client-urls: https://10.10.10.100:2379
client-transport-security:
  cert-file: /var/lib/rancher/k3s/server/tls/etcd/server-client.crt
  client-cert-auth: true
  key-file: /var/lib/rancher/k3s/server/tls/etcd/server-client.key
  trusted-ca-file: /var/lib/rancher/k3s/server/tls/etcd/server-ca.crt
data-dir: /var/lib/rancher/k3s/server/db/etcd
election-timeout: 5000
experimental-initial-corrupt-check: true
heartbeat-interval: 500
initial-advertise-peer-urls: https://10.10.10.100:2380
initial-cluster: server-0-4a89bd20=https://10.10.10.100:2380
initial-cluster-state: new
listen-client-http-urls: https://127.0.0.1:2382
listen-client-urls: https://127.0.0.1:2379,https://10.10.10.100:2379
listen-metrics-urls: http://127.0.0.1:2381
listen-peer-urls: https://127.0.0.1:2380,https://10.10.10.100:2380
log-outputs:
- stderr
logger: zap
name: server-0-4a89bd20
peer-transport-security:
  cert-file: /var/lib/rancher/k3s/server/tls/etcd/peer-server-client.crt
  client-cert-auth: true
  key-file: /var/lib/rancher/k3s/server/tls/etcd/peer-server-client.key
  trusted-ca-file: /var/lib/rancher/k3s/server/tls/etcd/peer-ca.crt
snapshot-count: 10000

Remediation:

If running on with sqlite or a external DB, etcd checks are Not Applicable. When running with embedded-etcd, K3s generates cert and key files for etcd. These are located in /var/lib/rancher/k3s/server/tls/etcd/. If this check fails, ensure that the configuration file /var/lib/rancher/k3s/server/db/etcd/config has not been modified to use custom cert and key files.

2.2 Ensure that the --client-cert-auth argument is set to true (Automated)

Result: PASS

Audit:

Expected Result: '.client-transport-security.client-cert-auth' is equal to 'true'

Returned Value:

advertise-client-urls: https://10.10.10.100:2379
client-transport-security:
  cert-file: /var/lib/rancher/k3s/server/tls/etcd/server-client.crt
  client-cert-auth: true
  key-file: /var/lib/rancher/k3s/server/tls/etcd/server-client.key
  trusted-ca-file: /var/lib/rancher/k3s/server/tls/etcd/server-ca.crt
data-dir: /var/lib/rancher/k3s/server/db/etcd
election-timeout: 5000
experimental-initial-corrupt-check: true
heartbeat-interval: 500
initial-advertise-peer-urls: https://10.10.10.100:2380
initial-cluster: server-0-4a89bd20=https://10.10.10.100:2380
initial-cluster-state: new
listen-client-http-urls: https://127.0.0.1:2382
listen-client-urls: https://127.0.0.1:2379,https://10.10.10.100:2379
listen-metrics-urls: http://127.0.0.1:2381
listen-peer-urls: https://127.0.0.1:2380,https://10.10.10.100:2380
log-outputs:
- stderr
logger: zap
name: server-0-4a89bd20
peer-transport-security:
  cert-file: /var/lib/rancher/k3s/server/tls/etcd/peer-server-client.crt
  client-cert-auth: true
  key-file: /var/lib/rancher/k3s/server/tls/etcd/peer-server-client.key
  trusted-ca-file: /var/lib/rancher/k3s/server/tls/etcd/peer-ca.crt
snapshot-count: 10000

Remediation:

If running on with sqlite or a external DB, etcd checks are Not Applicable. When running with embedded-etcd, K3s sets the --client-cert-auth parameter to true. If this check fails, ensure that the configuration file /var/lib/rancher/k3s/server/db/etcd/config has not been modified to disable client certificate authentication.

2.3 Ensure that the --auto-tls argument is not set to true (Automated)

Result: PASS

Audit:

Expected Result: '.client-transport-security.auto-tls' is present OR '.client-transport-security.auto-tls' is not present

Returned Value:

advertise-client-urls: https://10.10.10.100:2379
client-transport-security:
  cert-file: /var/lib/rancher/k3s/server/tls/etcd/server-client.crt
  client-cert-auth: true
  key-file: /var/lib/rancher/k3s/server/tls/etcd/server-client.key
  trusted-ca-file: /var/lib/rancher/k3s/server/tls/etcd/server-ca.crt
data-dir: /var/lib/rancher/k3s/server/db/etcd
election-timeout: 5000
experimental-initial-corrupt-check: true
heartbeat-interval: 500
initial-advertise-peer-urls: https://10.10.10.100:2380
initial-cluster: server-0-4a89bd20=https://10.10.10.100:2380
initial-cluster-state: new
listen-client-http-urls: https://127.0.0.1:2382
listen-client-urls: https://127.0.0.1:2379,https://10.10.10.100:2379
listen-metrics-urls: http://127.0.0.1:2381
listen-peer-urls: https://127.0.0.1:2380,https://10.10.10.100:2380
log-outputs:
- stderr
logger: zap
name: server-0-4a89bd20
peer-transport-security:
  cert-file: /var/lib/rancher/k3s/server/tls/etcd/peer-server-client.crt
  client-cert-auth: true
  key-file: /var/lib/rancher/k3s/server/tls/etcd/peer-server-client.key
  trusted-ca-file: /var/lib/rancher/k3s/server/tls/etcd/peer-ca.crt
snapshot-count: 10000

Remediation:

If running on with sqlite or a external DB, etcd checks are Not Applicable. When running with embedded-etcd, K3s does not set the --auto-tls parameter. If this check fails, edit the etcd pod specification file /var/lib/rancher/k3s/server/db/etcd/config on the master node and either remove the --auto-tls parameter or set it to false. client-transport-security: auto-tls: false

2.4 Ensure that the --peer-cert-file and --peer-key-file arguments are set as appropriate (Automated)

Result: PASS

Audit:

Expected Result: '.peer-transport-security.cert-file' is equal to '/var/lib/rancher/k3s/server/tls/etcd/peer-server-client.crt' AND '.peer-transport-security.key-file' is equal to '/var/lib/rancher/k3s/server/tls/etcd/peer-server-client.key'

Returned Value:

advertise-client-urls: https://10.10.10.100:2379
client-transport-security:
  cert-file: /var/lib/rancher/k3s/server/tls/etcd/server-client.crt
  client-cert-auth: true
  key-file: /var/lib/rancher/k3s/server/tls/etcd/server-client.key
  trusted-ca-file: /var/lib/rancher/k3s/server/tls/etcd/server-ca.crt
data-dir: /var/lib/rancher/k3s/server/db/etcd
election-timeout: 5000
experimental-initial-corrupt-check: true
heartbeat-interval: 500
initial-advertise-peer-urls: https://10.10.10.100:2380
initial-cluster: server-0-4a89bd20=https://10.10.10.100:2380
initial-cluster-state: new
listen-client-http-urls: https://127.0.0.1:2382
listen-client-urls: https://127.0.0.1:2379,https://10.10.10.100:2379
listen-metrics-urls: http://127.0.0.1:2381
listen-peer-urls: https://127.0.0.1:2380,https://10.10.10.100:2380
log-outputs:
- stderr
logger: zap
name: server-0-4a89bd20
peer-transport-security:
  cert-file: /var/lib/rancher/k3s/server/tls/etcd/peer-server-client.crt
  client-cert-auth: true
  key-file: /var/lib/rancher/k3s/server/tls/etcd/peer-server-client.key
  trusted-ca-file: /var/lib/rancher/k3s/server/tls/etcd/peer-ca.crt
snapshot-count: 10000

Remediation:

If running on with sqlite or a external DB, etcd checks are Not Applicable. When running with embedded-etcd, K3s generates peer cert and key files for etcd. These are located in /var/lib/rancher/k3s/server/tls/etcd/. If this check fails, ensure that the configuration file /var/lib/rancher/k3s/server/db/etcd/config has not been modified to use custom peer cert and key files.

2.5 Ensure that the --peer-client-cert-auth argument is set to true (Automated)

Result: PASS

Audit:

Expected Result: '.peer-transport-security.client-cert-auth' is equal to 'true'

Returned Value:

advertise-client-urls: https://10.10.10.100:2379
client-transport-security:
  cert-file: /var/lib/rancher/k3s/server/tls/etcd/server-client.crt
  client-cert-auth: true
  key-file: /var/lib/rancher/k3s/server/tls/etcd/server-client.key
  trusted-ca-file: /var/lib/rancher/k3s/server/tls/etcd/server-ca.crt
data-dir: /var/lib/rancher/k3s/server/db/etcd
election-timeout: 5000
experimental-initial-corrupt-check: true
heartbeat-interval: 500
initial-advertise-peer-urls: https://10.10.10.100:2380
initial-cluster: server-0-4a89bd20=https://10.10.10.100:2380
initial-cluster-state: new
listen-client-http-urls: https://127.0.0.1:2382
listen-client-urls: https://127.0.0.1:2379,https://10.10.10.100:2379
listen-metrics-urls: http://127.0.0.1:2381
listen-peer-urls: https://127.0.0.1:2380,https://10.10.10.100:2380
log-outputs:
- stderr
logger: zap
name: server-0-4a89bd20
peer-transport-security:
  cert-file: /var/lib/rancher/k3s/server/tls/etcd/peer-server-client.crt
  client-cert-auth: true
  key-file: /var/lib/rancher/k3s/server/tls/etcd/peer-server-client.key
  trusted-ca-file: /var/lib/rancher/k3s/server/tls/etcd/peer-ca.crt
snapshot-count: 10000

Remediation:

If running on with sqlite or a external DB, etcd checks are Not Applicable. When running with embedded-etcd, K3s sets the --peer-cert-auth parameter to true. If this check fails, ensure that the configuration file /var/lib/rancher/k3s/server/db/etcd/config has not been modified to disable peer client certificate authentication.

2.6 Ensure that the --peer-auto-tls argument is not set to true (Automated)

Result: PASS

Audit:

Expected Result: '.peer-transport-security.auto-tls' is present OR '.peer-transport-security.auto-tls' is not present

Returned Value:

advertise-client-urls: https://10.10.10.100:2379
client-transport-security:
  cert-file: /var/lib/rancher/k3s/server/tls/etcd/server-client.crt
  client-cert-auth: true
  key-file: /var/lib/rancher/k3s/server/tls/etcd/server-client.key
  trusted-ca-file: /var/lib/rancher/k3s/server/tls/etcd/server-ca.crt
data-dir: /var/lib/rancher/k3s/server/db/etcd
election-timeout: 5000
experimental-initial-corrupt-check: true
heartbeat-interval: 500
initial-advertise-peer-urls: https://10.10.10.100:2380
initial-cluster: server-0-4a89bd20=https://10.10.10.100:2380
initial-cluster-state: new
listen-client-http-urls: https://127.0.0.1:2382
listen-client-urls: https://127.0.0.1:2379,https://10.10.10.100:2379
listen-metrics-urls: http://127.0.0.1:2381
listen-peer-urls: https://127.0.0.1:2380,https://10.10.10.100:2380
log-outputs:
- stderr
logger: zap
name: server-0-4a89bd20
peer-transport-security:
  cert-file: /var/lib/rancher/k3s/server/tls/etcd/peer-server-client.crt
  client-cert-auth: true
  key-file: /var/lib/rancher/k3s/server/tls/etcd/peer-server-client.key
  trusted-ca-file: /var/lib/rancher/k3s/server/tls/etcd/peer-ca.crt
snapshot-count: 10000

Remediation:

If running on with sqlite or a external DB, etcd checks are Not Applicable. When running with embedded-etcd, K3s does not set the --peer-auto-tls parameter. If this check fails, edit the etcd pod specification file /var/lib/rancher/k3s/server/db/etcd/config on the master node and either remove the --peer-auto-tls parameter or set it to false. peer-transport-security: auto-tls: false

2.7 Ensure that a unique Certificate Authority is used for etcd (Automated)

Result: PASS

Audit:

Expected Result: '.peer-transport-security.trusted-ca-file' is equal to '/var/lib/rancher/k3s/server/tls/etcd/peer-ca.crt'

Returned Value:

advertise-client-urls: https://10.10.10.100:2379
client-transport-security:
  cert-file: /var/lib/rancher/k3s/server/tls/etcd/server-client.crt
  client-cert-auth: true
  key-file: /var/lib/rancher/k3s/server/tls/etcd/server-client.key
  trusted-ca-file: /var/lib/rancher/k3s/server/tls/etcd/server-ca.crt
data-dir: /var/lib/rancher/k3s/server/db/etcd
election-timeout: 5000
experimental-initial-corrupt-check: true
heartbeat-interval: 500
initial-advertise-peer-urls: https://10.10.10.100:2380
initial-cluster: server-0-4a89bd20=https://10.10.10.100:2380
initial-cluster-state: new
listen-client-http-urls: https://127.0.0.1:2382
listen-client-urls: https://127.0.0.1:2379,https://10.10.10.100:2379
listen-metrics-urls: http://127.0.0.1:2381
listen-peer-urls: https://127.0.0.1:2380,https://10.10.10.100:2380
log-outputs:
- stderr
logger: zap
name: server-0-4a89bd20
peer-transport-security:
  cert-file: /var/lib/rancher/k3s/server/tls/etcd/peer-server-client.crt
  client-cert-auth: true
  key-file: /var/lib/rancher/k3s/server/tls/etcd/peer-server-client.key
  trusted-ca-file: /var/lib/rancher/k3s/server/tls/etcd/peer-ca.crt
snapshot-count: 10000

Remediation:

If running on with sqlite or a external DB, etcd checks are Not Applicable. When running with embedded-etcd, K3s generates a unique certificate authority for etcd. This is located at /var/lib/rancher/k3s/server/tls/etcd/peer-ca.crt. If this check fails, ensure that the configuration file /var/lib/rancher/k3s/server/db/etcd/config has not been modified to use a shared certificate authority.

4.1 Worker Node Configuration Files

4.1.1 Ensure that the kubelet service file permissions are set to 600 or more restrictive (Automated)

Result: Not Applicable

Rationale:

The kubelet is embedded in the k3s process. There is no kubelet service file, all configuration is passed in as arguments at runtime.

4.1.2 Ensure that the kubelet service file ownership is set to root:root (Automated)

Result: Not Applicable

Rationale:

The kubelet is embedded in the k3s process. There is no kubelet service file, all configuration is passed in as arguments at runtime.

All configuration is passed in as arguments at container run time.

4.1.3 If proxy kubeconfig file exists ensure permissions are set to 600 or more restrictive (Automated)

Result: PASS

Audit:

/bin/sh -c 'if test -e /var/lib/rancher/k3s/agent/kubeproxy.kubeconfig; then stat -c permissions=%a /var/lib/rancher/k3s/agent/kubeproxy.kubeconfig; fi'

Expected Result: permissions has permissions 600, expected 600 or more restrictive

Returned Value:

permissions=600

Remediation:

Run the below command (based on the file location on your system) on the each worker node. For example, chmod 600 /var/lib/rancher/k3s/agent/kubeproxy.kubeconfig

4.1.4 If proxy kubeconfig file exists ensure ownership is set to root:root (Automated)

Result: PASS

Audit:

/bin/sh -c 'if test -e /var/lib/rancher/k3s/agent/kubeproxy.kubeconfig; then stat -c %U:%G /var/lib/rancher/k3s/agent/kubeproxy.kubeconfig; fi'

Expected Result: 'root:root' is present

Returned Value:

root:root

Remediation:

Run the below command (based on the file location on your system) on the each worker node. For example, chown root:root /var/lib/rancher/k3s/agent/kubeproxy.kubeconfig

4.1.5 Ensure that the --kubeconfig kubelet.conf file permissions are set to 600 or more restrictive (Automated)

Result: PASS

Audit:

/bin/sh -c 'if test -e /var/lib/rancher/k3s/agent/kubelet.kubeconfig; then stat -c permissions=%a /var/lib/rancher/k3s/agent/kubelet.kubeconfig; fi'

Expected Result: permissions has permissions 600, expected 600 or more restrictive

Returned Value:

permissions=600

Remediation:

Run the below command (based on the file location on your system) on the each worker node. For example, chmod 600 /var/lib/rancher/k3s/agent/kubelet.kubeconfig

4.1.6 Ensure that the --kubeconfig kubelet.conf file ownership is set to root:root (Automated)

Result: PASS

Audit:

stat -c %U:%G /var/lib/rancher/k3s/agent/kubelet.kubeconfig

Expected Result: 'root:root' is present

Returned Value:

root:root

Remediation:

Run the below command (based on the file location on your system) on the each worker node. For example, chown root:root /var/lib/rancher/k3s/agent/kubelet.kubeconfig

4.1.7 Ensure that the certificate authorities file permissions are set to 600 or more restrictive (Automated)

Result: PASS

Audit:

stat -c permissions=%a /var/lib/rancher/k3s/agent/client-ca.crt

Expected Result: permissions has permissions 600, expected 600 or more restrictive

Returned Value:

permissions=600

Remediation:

Run the following command to modify the file permissions of the --client-ca-file chmod 600 /var/lib/rancher/k3s/agent/client-ca.crt

4.1.8 Ensure that the client certificate authorities file ownership is set to root:root (Automated)

Result: PASS

Audit:

stat -c %U:%G /var/lib/rancher/k3s/agent/client-ca.crt

Expected Result: 'root:root' is equal to 'root:root'

Returned Value:

root:root

Remediation:

Run the following command to modify the ownership of the --client-ca-file. chown root:root /var/lib/rancher/k3s/agent/client-ca.crt

4.1.9 Ensure that the kubelet --config configuration file has permissions set to 600 or more restrictive (Automated)

Result: Not Applicable

Rationale:

The kubelet is embedded in the k3s process. There is no kubelet config file, all configuration is passed in as arguments at runtime.

4.1.10 Ensure that the kubelet --config configuration file ownership is set to root:root (Automated)

Result: Not Applicable

Rationale:

The kubelet is embedded in the k3s process. There is no kubelet config file, all configuration is passed in as arguments at runtime.

4.2 Kubelet

4.2.1 Ensure that the --anonymous-auth argument is set to false (Automated)

Result: PASS

Audit:

/bin/sh -c 'if test $(journalctl -D /var/log/journal -u k3s | grep "Running kube-apiserver" | wc -l) -gt 0; then journalctl -D /var/log/journal -u k3s | grep "Running kube-apiserver" | tail -n1 | grep "anonymous-auth" | grep -v grep; else echo "--anonymous-auth=false"; fi'

Expected Result: '--anonymous-auth' is equal to 'false'

Returned Value:

Aug 09 19:01:28 server-0 k3s[2354]: time="2024-08-09T19:01:28Z" level=info msg="Running kube-apiserver --admission-control-config-file=/var/lib/rancher/k3s/server/psa.yaml --advertise-address=10.10.10.100 --advertise-port=6443 --allow-privileged=true --anonymous-auth=false --api-audiences=https://kubernetes.default.svc.cluster.local,k3s --audit-log-maxage=30 --audit-log-maxbackup=10 --audit-log-maxsize=100 --audit-log-path=/var/lib/rancher/k3s/server/logs/audit.log --audit-policy-file=/var/lib/rancher/k3s/server/audit.yaml --authorization-mode=Node,RBAC --bind-address=127.0.0.1 --cert-dir=/var/lib/rancher/k3s/server/tls/temporary-certs --client-ca-file=/var/lib/rancher/k3s/server/tls/client-ca.crt --egress-selector-config-file=/var/lib/rancher/k3s/server/etc/egress-selector-config.yaml --enable-admission-plugins=NodeRestriction --enable-aggregator-routing=true --enable-bootstrap-token-auth=true --encryption-provider-config=/var/lib/rancher/k3s/server/cred/encryption-config.json --etcd-cafile=/var/lib/rancher/k3s/server/tls/etcd/server-ca.crt --etcd-certfile=/var/lib/rancher/k3s/server/tls/etcd/client.crt --etcd-keyfile=/var/lib/rancher/k3s/server/tls/etcd/client.key --etcd-servers=https://127.0.0.1:2379 --feature-gates=JobTrackingWithFinalizers=true --kubelet-certificate-authority=/var/lib/rancher/k3s/server/tls/server-ca.crt --kubelet-client-certificate=/var/lib/rancher/k3s/server/tls/client-kube-apiserver.crt --kubelet-client-key=/var/lib/rancher/k3s/server/tls/client-kube-apiserver.key --kubelet-preferred-address-types=InternalIP,ExternalIP,Hostname --profiling=false --proxy-client-cert-file=/var/lib/rancher/k3s/server/tls/client-auth-proxy.crt --proxy-client-key-file=/var/lib/rancher/k3s/server/tls/client-auth-proxy.key --requestheader-allowed-names=system:auth-proxy --requestheader-client-ca-file=/var/lib/rancher/k3s/server/tls/request-header-ca.crt --requestheader-extra-headers-prefix=X-Remote-Extra- --requestheader-group-headers=X-Remote-Group --requestheader-username-headers=X-Remote-User --secure-port=6444 --service-account-issuer=https://kubernetes.default.svc.cluster.local --service-account-key-file=/var/lib/rancher/k3s/server/tls/service.key --service-account-signing-key-file=/var/lib/rancher/k3s/server/tls/service.current.key --service-cluster-ip-range=10.43.0.0/16 --service-node-port-range=30000-32767 --storage-backend=etcd3 --tls-cert-file=/var/lib/rancher/k3s/server/tls/serving-kube-apiserver.crt --tls-cipher-suites=TLS_ECDHE_ECDSA_WITH_AES_256_GCM_SHA384,TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384,TLS_ECDHE_ECDSA_WITH_AES_128_GCM_SHA256,TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256,TLS_ECDHE_ECDSA_WITH_CHACHA20_POLY1305,TLS_ECDHE_RSA_WITH_CHACHA20_POLY1305 --tls-private-key-file=/var/lib/rancher/k3s/server/tls/serving-kube-apiserver.key"

Remediation:

By default, K3s sets the --anonymous-auth to false. If you have set this to a different value, you should set it back to false. If using the K3s config file /etc/rancher/k3s/config.yaml, remove any lines similar to below.

kubelet-arg:
  - "anonymous-auth=true"

If using the command line, edit the K3s service file and remove the below argument. --kubelet-arg="anonymous-auth=true" Based on your system, restart the k3s service. For example, systemctl daemon-reload systemctl restart k3s.service

4.2.2 Ensure that the --authorization-mode argument is not set to AlwaysAllow (Automated)

Result: PASS

Audit:

/bin/sh -c 'if test $(journalctl -D /var/log/journal -u k3s | grep "Running kube-apiserver" | wc -l) -gt 0; then journalctl -D /var/log/journal -u k3s | grep "Running kube-apiserver" | tail -n1 | grep "authorization-mode"; else echo "--authorization-mode=Webhook"; fi'

Expected Result: '--authorization-mode' does not have 'AlwaysAllow'

Returned Value:

Aug 09 19:01:28 server-0 k3s[2354]: time="2024-08-09T19:01:28Z" level=info msg="Running kube-apiserver --admission-control-config-file=/var/lib/rancher/k3s/server/psa.yaml --advertise-address=10.10.10.100 --advertise-port=6443 --allow-privileged=true --anonymous-auth=false --api-audiences=https://kubernetes.default.svc.cluster.local,k3s --audit-log-maxage=30 --audit-log-maxbackup=10 --audit-log-maxsize=100 --audit-log-path=/var/lib/rancher/k3s/server/logs/audit.log --audit-policy-file=/var/lib/rancher/k3s/server/audit.yaml --authorization-mode=Node,RBAC --bind-address=127.0.0.1 --cert-dir=/var/lib/rancher/k3s/server/tls/temporary-certs --client-ca-file=/var/lib/rancher/k3s/server/tls/client-ca.crt --egress-selector-config-file=/var/lib/rancher/k3s/server/etc/egress-selector-config.yaml --enable-admission-plugins=NodeRestriction --enable-aggregator-routing=true --enable-bootstrap-token-auth=true --encryption-provider-config=/var/lib/rancher/k3s/server/cred/encryption-config.json --etcd-cafile=/var/lib/rancher/k3s/server/tls/etcd/server-ca.crt --etcd-certfile=/var/lib/rancher/k3s/server/tls/etcd/client.crt --etcd-keyfile=/var/lib/rancher/k3s/server/tls/etcd/client.key --etcd-servers=https://127.0.0.1:2379 --feature-gates=JobTrackingWithFinalizers=true --kubelet-certificate-authority=/var/lib/rancher/k3s/server/tls/server-ca.crt --kubelet-client-certificate=/var/lib/rancher/k3s/server/tls/client-kube-apiserver.crt --kubelet-client-key=/var/lib/rancher/k3s/server/tls/client-kube-apiserver.key --kubelet-preferred-address-types=InternalIP,ExternalIP,Hostname --profiling=false --proxy-client-cert-file=/var/lib/rancher/k3s/server/tls/client-auth-proxy.crt --proxy-client-key-file=/var/lib/rancher/k3s/server/tls/client-auth-proxy.key --requestheader-allowed-names=system:auth-proxy --requestheader-client-ca-file=/var/lib/rancher/k3s/server/tls/request-header-ca.crt --requestheader-extra-headers-prefix=X-Remote-Extra- --requestheader-group-headers=X-Remote-Group --requestheader-username-headers=X-Remote-User --secure-port=6444 --service-account-issuer=https://kubernetes.default.svc.cluster.local --service-account-key-file=/var/lib/rancher/k3s/server/tls/service.key --service-account-signing-key-file=/var/lib/rancher/k3s/server/tls/service.current.key --service-cluster-ip-range=10.43.0.0/16 --service-node-port-range=30000-32767 --storage-backend=etcd3 --tls-cert-file=/var/lib/rancher/k3s/server/tls/serving-kube-apiserver.crt --tls-cipher-suites=TLS_ECDHE_ECDSA_WITH_AES_256_GCM_SHA384,TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384,TLS_ECDHE_ECDSA_WITH_AES_128_GCM_SHA256,TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256,TLS_ECDHE_ECDSA_WITH_CHACHA20_POLY1305,TLS_ECDHE_RSA_WITH_CHACHA20_POLY1305 --tls-private-key-file=/var/lib/rancher/k3s/server/tls/serving-kube-apiserver.key"

Remediation:

By default, K3s does not set the --authorization-mode to AlwaysAllow. If using the K3s config file /etc/rancher/k3s/config.yaml, remove any lines similar to below.

kubelet-arg:
  - "authorization-mode=AlwaysAllow"

If using the command line, edit the K3s service file and remove the below argument. --kubelet-arg="authorization-mode=AlwaysAllow" Based on your system, restart the k3s service. For example, systemctl daemon-reload systemctl restart k3s.service

4.2.3 Ensure that the --client-ca-file argument is set as appropriate (Automated)

Result: PASS

Audit:

/bin/sh -c 'if test $(journalctl -D /var/log/journal -u k3s | grep "Running kube-apiserver" | wc -l) -gt 0; then journalctl -D /var/log/journal -u k3s | grep "Running kube-apiserver" | tail -n1 | grep "client-ca-file"; else echo "--client-ca-file=/var/lib/rancher/k3s/server/tls/request-header-ca.crt"; fi'

Expected Result: '--client-ca-file' is present

Returned Value:

Aug 09 19:01:28 server-0 k3s[2354]: time="2024-08-09T19:01:28Z" level=info msg="Running kube-apiserver --admission-control-config-file=/var/lib/rancher/k3s/server/psa.yaml --advertise-address=10.10.10.100 --advertise-port=6443 --allow-privileged=true --anonymous-auth=false --api-audiences=https://kubernetes.default.svc.cluster.local,k3s --audit-log-maxage=30 --audit-log-maxbackup=10 --audit-log-maxsize=100 --audit-log-path=/var/lib/rancher/k3s/server/logs/audit.log --audit-policy-file=/var/lib/rancher/k3s/server/audit.yaml --authorization-mode=Node,RBAC --bind-address=127.0.0.1 --cert-dir=/var/lib/rancher/k3s/server/tls/temporary-certs --client-ca-file=/var/lib/rancher/k3s/server/tls/client-ca.crt --egress-selector-config-file=/var/lib/rancher/k3s/server/etc/egress-selector-config.yaml --enable-admission-plugins=NodeRestriction --enable-aggregator-routing=true --enable-bootstrap-token-auth=true --encryption-provider-config=/var/lib/rancher/k3s/server/cred/encryption-config.json --etcd-cafile=/var/lib/rancher/k3s/server/tls/etcd/server-ca.crt --etcd-certfile=/var/lib/rancher/k3s/server/tls/etcd/client.crt --etcd-keyfile=/var/lib/rancher/k3s/server/tls/etcd/client.key --etcd-servers=https://127.0.0.1:2379 --feature-gates=JobTrackingWithFinalizers=true --kubelet-certificate-authority=/var/lib/rancher/k3s/server/tls/server-ca.crt --kubelet-client-certificate=/var/lib/rancher/k3s/server/tls/client-kube-apiserver.crt --kubelet-client-key=/var/lib/rancher/k3s/server/tls/client-kube-apiserver.key --kubelet-preferred-address-types=InternalIP,ExternalIP,Hostname --profiling=false --proxy-client-cert-file=/var/lib/rancher/k3s/server/tls/client-auth-proxy.crt --proxy-client-key-file=/var/lib/rancher/k3s/server/tls/client-auth-proxy.key --requestheader-allowed-names=system:auth-proxy --requestheader-client-ca-file=/var/lib/rancher/k3s/server/tls/request-header-ca.crt --requestheader-extra-headers-prefix=X-Remote-Extra- --requestheader-group-headers=X-Remote-Group --requestheader-username-headers=X-Remote-User --secure-port=6444 --service-account-issuer=https://kubernetes.default.svc.cluster.local --service-account-key-file=/var/lib/rancher/k3s/server/tls/service.key --service-account-signing-key-file=/var/lib/rancher/k3s/server/tls/service.current.key --service-cluster-ip-range=10.43.0.0/16 --service-node-port-range=30000-32767 --storage-backend=etcd3 --tls-cert-file=/var/lib/rancher/k3s/server/tls/serving-kube-apiserver.crt --tls-cipher-suites=TLS_ECDHE_ECDSA_WITH_AES_256_GCM_SHA384,TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384,TLS_ECDHE_ECDSA_WITH_AES_128_GCM_SHA256,TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256,TLS_ECDHE_ECDSA_WITH_CHACHA20_POLY1305,TLS_ECDHE_RSA_WITH_CHACHA20_POLY1305 --tls-private-key-file=/var/lib/rancher/k3s/server/tls/serving-kube-apiserver.key"

Remediation:

By default, K3s automatically provides the client ca certificate for the Kubelet. It is generated and located at /var/lib/rancher/k3s/agent/client-ca.crt

4.2.4 Verify that the --read-only-port argument is set to 0 (Automated)

Result: PASS

Audit:

journalctl -u k3s -u k3s-agent | grep 'Running kubelet' | tail -n1

Expected Result: '--read-only-port' is equal to '0' OR '--read-only-port' is not present

Returned Value:

Aug 09 19:01:30 server-0 k3s[2354]: time="2024-08-09T19:01:30Z" level=info msg="Running kubelet --address=0.0.0.0 --allowed-unsafe-sysctls=net.ipv4.ip_forward,net.ipv6.conf.all.forwarding --anonymous-auth=false --authentication-token-webhook=true --authorization-mode=Webhook --cgroup-driver=systemd --client-ca-file=/var/lib/rancher/k3s/agent/client-ca.crt --cloud-provider=external --cluster-dns=10.43.0.10 --cluster-domain=cluster.local --container-runtime-endpoint=unix:///run/k3s/containerd/containerd.sock --containerd=/run/k3s/containerd/containerd.sock --event-qps=0 --eviction-hard=imagefs.available<5%,nodefs.available<5% --eviction-minimum-reclaim=imagefs.available=10%,nodefs.available=10% --fail-swap-on=false --healthz-bind-address=127.0.0.1 --hostname-override=server-0 --kubeconfig=/var/lib/rancher/k3s/agent/kubelet.kubeconfig --make-iptables-util-chains=true --node-ip=10.10.10.100 --node-labels= --pod-infra-container-image=rancher/mirrored-pause:3.6 --pod-manifest-path=/var/lib/rancher/k3s/agent/pod-manifests --protect-kernel-defaults=true --read-only-port=0 --resolv-conf=/run/systemd/resolve/resolv.conf --serialize-image-pulls=false --streaming-connection-idle-timeout=5m --tls-cert-file=/var/lib/rancher/k3s/agent/serving-kubelet.crt --tls-cipher-suites=TLS_ECDHE_ECDSA_WITH_AES_256_GCM_SHA384,TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384,TLS_ECDHE_ECDSA_WITH_AES_128_GCM_SHA256,TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256,TLS_ECDHE_ECDSA_WITH_CHACHA20_POLY1305,TLS_ECDHE_RSA_WITH_CHACHA20_POLY1305 --tls-private-key-file=/var/lib/rancher/k3s/agent/serving-kubelet.key"

Remediation:

By default, K3s sets the --read-only-port to 0. If you have set this to a different value, you should set it back to 0. If using the K3s config file /etc/rancher/k3s/config.yaml, remove any lines similar to below.

kubelet-arg:
  - "read-only-port=XXXX"

If using the command line, edit the K3s service file and remove the below argument. --kubelet-arg="read-only-port=XXXX" Based on your system, restart the k3s service. For example, systemctl daemon-reload systemctl restart k3s.service

4.2.5 Ensure that the --streaming-connection-idle-timeout argument is not set to 0 (Manual)

Result: PASS

Audit:

journalctl -u k3s -u k3s-agent | grep 'Running kubelet' | tail -n1

Expected Result: '--streaming-connection-idle-timeout' is not equal to '0' OR '--streaming-connection-idle-timeout' is not present

Returned Value:

Aug 09 19:01:30 server-0 k3s[2354]: time="2024-08-09T19:01:30Z" level=info msg="Running kubelet --address=0.0.0.0 --allowed-unsafe-sysctls=net.ipv4.ip_forward,net.ipv6.conf.all.forwarding --anonymous-auth=false --authentication-token-webhook=true --authorization-mode=Webhook --cgroup-driver=systemd --client-ca-file=/var/lib/rancher/k3s/agent/client-ca.crt --cloud-provider=external --cluster-dns=10.43.0.10 --cluster-domain=cluster.local --container-runtime-endpoint=unix:///run/k3s/containerd/containerd.sock --containerd=/run/k3s/containerd/containerd.sock --event-qps=0 --eviction-hard=imagefs.available<5%,nodefs.available<5% --eviction-minimum-reclaim=imagefs.available=10%,nodefs.available=10% --fail-swap-on=false --healthz-bind-address=127.0.0.1 --hostname-override=server-0 --kubeconfig=/var/lib/rancher/k3s/agent/kubelet.kubeconfig --make-iptables-util-chains=true --node-ip=10.10.10.100 --node-labels= --pod-infra-container-image=rancher/mirrored-pause:3.6 --pod-manifest-path=/var/lib/rancher/k3s/agent/pod-manifests --protect-kernel-defaults=true --read-only-port=0 --resolv-conf=/run/systemd/resolve/resolv.conf --serialize-image-pulls=false --streaming-connection-idle-timeout=5m --tls-cert-file=/var/lib/rancher/k3s/agent/serving-kubelet.crt --tls-cipher-suites=TLS_ECDHE_ECDSA_WITH_AES_256_GCM_SHA384,TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384,TLS_ECDHE_ECDSA_WITH_AES_128_GCM_SHA256,TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256,TLS_ECDHE_ECDSA_WITH_CHACHA20_POLY1305,TLS_ECDHE_RSA_WITH_CHACHA20_POLY1305 --tls-private-key-file=/var/lib/rancher/k3s/agent/serving-kubelet.key"

Remediation:

If using the K3s config file /etc/rancher/k3s/config.yaml, set the following parameter to an appropriate value.

kubelet-arg:
  - "streaming-connection-idle-timeout=5m"

If using the command line, run K3s with --kubelet-arg="streaming-connection-idle-timeout=5m". Based on your system, restart the k3s service. For example, systemctl restart k3s.service

4.2.6 Ensure that the --make-iptables-util-chains argument is set to true (Automated)

Result: PASS

Audit:

journalctl -u k3s -u k3s-agent | grep 'Running kubelet' | tail -n1

Expected Result: '--make-iptables-util-chains' is equal to 'true' OR '--make-iptables-util-chains' is not present

Returned Value:

Aug 09 19:01:30 server-0 k3s[2354]: time="2024-08-09T19:01:30Z" level=info msg="Running kubelet --address=0.0.0.0 --allowed-unsafe-sysctls=net.ipv4.ip_forward,net.ipv6.conf.all.forwarding --anonymous-auth=false --authentication-token-webhook=true --authorization-mode=Webhook --cgroup-driver=systemd --client-ca-file=/var/lib/rancher/k3s/agent/client-ca.crt --cloud-provider=external --cluster-dns=10.43.0.10 --cluster-domain=cluster.local --container-runtime-endpoint=unix:///run/k3s/containerd/containerd.sock --containerd=/run/k3s/containerd/containerd.sock --event-qps=0 --eviction-hard=imagefs.available<5%,nodefs.available<5% --eviction-minimum-reclaim=imagefs.available=10%,nodefs.available=10% --fail-swap-on=false --healthz-bind-address=127.0.0.1 --hostname-override=server-0 --kubeconfig=/var/lib/rancher/k3s/agent/kubelet.kubeconfig --make-iptables-util-chains=true --node-ip=10.10.10.100 --node-labels= --pod-infra-container-image=rancher/mirrored-pause:3.6 --pod-manifest-path=/var/lib/rancher/k3s/agent/pod-manifests --protect-kernel-defaults=true --read-only-port=0 --resolv-conf=/run/systemd/resolve/resolv.conf --serialize-image-pulls=false --streaming-connection-idle-timeout=5m --tls-cert-file=/var/lib/rancher/k3s/agent/serving-kubelet.crt --tls-cipher-suites=TLS_ECDHE_ECDSA_WITH_AES_256_GCM_SHA384,TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384,TLS_ECDHE_ECDSA_WITH_AES_128_GCM_SHA256,TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256,TLS_ECDHE_ECDSA_WITH_CHACHA20_POLY1305,TLS_ECDHE_RSA_WITH_CHACHA20_POLY1305 --tls-private-key-file=/var/lib/rancher/k3s/agent/serving-kubelet.key"

Remediation:

If using the K3s config file /etc/rancher/k3s/config.yaml, set the following parameter.

kubelet-arg:
  - "make-iptables-util-chains=true"

If using the command line, run K3s with --kubelet-arg="make-iptables-util-chains=true". Based on your system, restart the k3s service. For example, systemctl restart k3s.service

4.2.7 Ensure that the --hostname-override argument is not set (Automated)

Result: Not Applicable

Rationale:

By default, K3s does set the --hostname-override argument. Per CIS guidelines, this is to comply with cloud providers that require this flag to ensure that hostname matches node names.

4.2.8 Ensure that the eventRecordQPS argument is set to a level which ensures appropriate event capture (Manual)

Result: PASS

Audit:

journalctl -u k3s -u k3s-agent | grep 'Running kubelet' | tail -n1

Expected Result: '--event-qps' is greater or equal to 0 OR '--event-qps' is not present

Returned Value:

Aug 09 19:01:30 server-0 k3s[2354]: time="2024-08-09T19:01:30Z" level=info msg="Running kubelet --address=0.0.0.0 --allowed-unsafe-sysctls=net.ipv4.ip_forward,net.ipv6.conf.all.forwarding --anonymous-auth=false --authentication-token-webhook=true --authorization-mode=Webhook --cgroup-driver=systemd --client-ca-file=/var/lib/rancher/k3s/agent/client-ca.crt --cloud-provider=external --cluster-dns=10.43.0.10 --cluster-domain=cluster.local --container-runtime-endpoint=unix:///run/k3s/containerd/containerd.sock --containerd=/run/k3s/containerd/containerd.sock --event-qps=0 --eviction-hard=imagefs.available<5%,nodefs.available<5% --eviction-minimum-reclaim=imagefs.available=10%,nodefs.available=10% --fail-swap-on=false --healthz-bind-address=127.0.0.1 --hostname-override=server-0 --kubeconfig=/var/lib/rancher/k3s/agent/kubelet.kubeconfig --make-iptables-util-chains=true --node-ip=10.10.10.100 --node-labels= --pod-infra-container-image=rancher/mirrored-pause:3.6 --pod-manifest-path=/var/lib/rancher/k3s/agent/pod-manifests --protect-kernel-defaults=true --read-only-port=0 --resolv-conf=/run/systemd/resolve/resolv.conf --serialize-image-pulls=false --streaming-connection-idle-timeout=5m --tls-cert-file=/var/lib/rancher/k3s/agent/serving-kubelet.crt --tls-cipher-suites=TLS_ECDHE_ECDSA_WITH_AES_256_GCM_SHA384,TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384,TLS_ECDHE_ECDSA_WITH_AES_128_GCM_SHA256,TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256,TLS_ECDHE_ECDSA_WITH_CHACHA20_POLY1305,TLS_ECDHE_RSA_WITH_CHACHA20_POLY1305 --tls-private-key-file=/var/lib/rancher/k3s/agent/serving-kubelet.key"

Remediation:

By default, K3s sets the event-qps to 0. Should you wish to change this, If using the K3s config file /etc/rancher/k3s/config.yaml, set the following parameter to an appropriate value.

kubelet-arg:
  - "event-qps=<value>"

If using the command line, run K3s with --kubelet-arg="event-qps=<value>". Based on your system, restart the k3s service. For example, systemctl restart k3s.service

4.2.9 Ensure that the --tls-cert-file and --tls-private-key-file arguments are set as appropriate (Automated)

Result: PASS

Audit:

journalctl -u k3s -u k3s-agent | grep 'Running kubelet' | tail -n1

Expected Result: '--tls-cert-file' is present AND '--tls-private-key-file' is present

Returned Value:

Aug 09 19:01:30 server-0 k3s[2354]: time="2024-08-09T19:01:30Z" level=info msg="Running kubelet --address=0.0.0.0 --allowed-unsafe-sysctls=net.ipv4.ip_forward,net.ipv6.conf.all.forwarding --anonymous-auth=false --authentication-token-webhook=true --authorization-mode=Webhook --cgroup-driver=systemd --client-ca-file=/var/lib/rancher/k3s/agent/client-ca.crt --cloud-provider=external --cluster-dns=10.43.0.10 --cluster-domain=cluster.local --container-runtime-endpoint=unix:///run/k3s/containerd/containerd.sock --containerd=/run/k3s/containerd/containerd.sock --event-qps=0 --eviction-hard=imagefs.available<5%,nodefs.available<5% --eviction-minimum-reclaim=imagefs.available=10%,nodefs.available=10% --fail-swap-on=false --healthz-bind-address=127.0.0.1 --hostname-override=server-0 --kubeconfig=/var/lib/rancher/k3s/agent/kubelet.kubeconfig --make-iptables-util-chains=true --node-ip=10.10.10.100 --node-labels= --pod-infra-container-image=rancher/mirrored-pause:3.6 --pod-manifest-path=/var/lib/rancher/k3s/agent/pod-manifests --protect-kernel-defaults=true --read-only-port=0 --resolv-conf=/run/systemd/resolve/resolv.conf --serialize-image-pulls=false --streaming-connection-idle-timeout=5m --tls-cert-file=/var/lib/rancher/k3s/agent/serving-kubelet.crt --tls-cipher-suites=TLS_ECDHE_ECDSA_WITH_AES_256_GCM_SHA384,TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384,TLS_ECDHE_ECDSA_WITH_AES_128_GCM_SHA256,TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256,TLS_ECDHE_ECDSA_WITH_CHACHA20_POLY1305,TLS_ECDHE_RSA_WITH_CHACHA20_POLY1305 --tls-private-key-file=/var/lib/rancher/k3s/agent/serving-kubelet.key"

Remediation:

By default, K3s automatically provides the TLS certificate and private key for the Kubelet. They are generated and located at /var/lib/rancher/k3s/agent/serving-kubelet.crt and /var/lib/rancher/k3s/agent/serving-kubelet.key If for some reason you need to provide your own certificate and key, you can set the the below parameters in the K3s config file /etc/rancher/k3s/config.yaml.

kubelet-arg:
  - "tls-cert-file=<path/to/tls-cert-file>"
  - "tls-private-key-file=<path/to/tls-private-key-file>"

4.2.10 Ensure that the --rotate-certificates argument is not set to false (Automated)

Result: PASS

Audit:

journalctl -u k3s -u k3s-agent | grep 'Running kubelet' | tail -n1

Expected Result: '--rotate-certificates' is present OR '--rotate-certificates' is not present

Returned Value:

Aug 09 19:01:30 server-0 k3s[2354]: time="2024-08-09T19:01:30Z" level=info msg="Running kubelet --address=0.0.0.0 --allowed-unsafe-sysctls=net.ipv4.ip_forward,net.ipv6.conf.all.forwarding --anonymous-auth=false --authentication-token-webhook=true --authorization-mode=Webhook --cgroup-driver=systemd --client-ca-file=/var/lib/rancher/k3s/agent/client-ca.crt --cloud-provider=external --cluster-dns=10.43.0.10 --cluster-domain=cluster.local --container-runtime-endpoint=unix:///run/k3s/containerd/containerd.sock --containerd=/run/k3s/containerd/containerd.sock --event-qps=0 --eviction-hard=imagefs.available<5%,nodefs.available<5% --eviction-minimum-reclaim=imagefs.available=10%,nodefs.available=10% --fail-swap-on=false --healthz-bind-address=127.0.0.1 --hostname-override=server-0 --kubeconfig=/var/lib/rancher/k3s/agent/kubelet.kubeconfig --make-iptables-util-chains=true --node-ip=10.10.10.100 --node-labels= --pod-infra-container-image=rancher/mirrored-pause:3.6 --pod-manifest-path=/var/lib/rancher/k3s/agent/pod-manifests --protect-kernel-defaults=true --read-only-port=0 --resolv-conf=/run/systemd/resolve/resolv.conf --serialize-image-pulls=false --streaming-connection-idle-timeout=5m --tls-cert-file=/var/lib/rancher/k3s/agent/serving-kubelet.crt --tls-cipher-suites=TLS_ECDHE_ECDSA_WITH_AES_256_GCM_SHA384,TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384,TLS_ECDHE_ECDSA_WITH_AES_128_GCM_SHA256,TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256,TLS_ECDHE_ECDSA_WITH_CHACHA20_POLY1305,TLS_ECDHE_RSA_WITH_CHACHA20_POLY1305 --tls-private-key-file=/var/lib/rancher/k3s/agent/serving-kubelet.key"

Remediation:

By default, K3s does not set the --rotate-certificates argument. If you have set this flag with a value of false, you should either set it to true or completely remove the flag. If using the K3s config file /etc/rancher/k3s/config.yaml, remove any rotate-certificates parameter. If using the command line, remove the K3s flag --kubelet-arg="rotate-certificates". Based on your system, restart the k3s service. For example, systemctl restart k3s.service

4.2.11 Verify that the RotateKubeletServerCertificate argument is set to true (Automated)

Result: PASS

Audit:

journalctl -u k3s -u k3s-agent | grep 'Running kubelet' | tail -n1

Expected Result: 'RotateKubeletServerCertificate' is present OR 'RotateKubeletServerCertificate' is not present

Returned Value:

Aug 09 19:01:30 server-0 k3s[2354]: time="2024-08-09T19:01:30Z" level=info msg="Running kubelet --address=0.0.0.0 --allowed-unsafe-sysctls=net.ipv4.ip_forward,net.ipv6.conf.all.forwarding --anonymous-auth=false --authentication-token-webhook=true --authorization-mode=Webhook --cgroup-driver=systemd --client-ca-file=/var/lib/rancher/k3s/agent/client-ca.crt --cloud-provider=external --cluster-dns=10.43.0.10 --cluster-domain=cluster.local --container-runtime-endpoint=unix:///run/k3s/containerd/containerd.sock --containerd=/run/k3s/containerd/containerd.sock --event-qps=0 --eviction-hard=imagefs.available<5%,nodefs.available<5% --eviction-minimum-reclaim=imagefs.available=10%,nodefs.available=10% --fail-swap-on=false --healthz-bind-address=127.0.0.1 --hostname-override=server-0 --kubeconfig=/var/lib/rancher/k3s/agent/kubelet.kubeconfig --make-iptables-util-chains=true --node-ip=10.10.10.100 --node-labels= --pod-infra-container-image=rancher/mirrored-pause:3.6 --pod-manifest-path=/var/lib/rancher/k3s/agent/pod-manifests --protect-kernel-defaults=true --read-only-port=0 --resolv-conf=/run/systemd/resolve/resolv.conf --serialize-image-pulls=false --streaming-connection-idle-timeout=5m --tls-cert-file=/var/lib/rancher/k3s/agent/serving-kubelet.crt --tls-cipher-suites=TLS_ECDHE_ECDSA_WITH_AES_256_GCM_SHA384,TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384,TLS_ECDHE_ECDSA_WITH_AES_128_GCM_SHA256,TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256,TLS_ECDHE_ECDSA_WITH_CHACHA20_POLY1305,TLS_ECDHE_RSA_WITH_CHACHA20_POLY1305 --tls-private-key-file=/var/lib/rancher/k3s/agent/serving-kubelet.key"

Remediation:

By default, K3s does not set the RotateKubeletServerCertificate feature gate. If you have enabled this feature gate, you should remove it. If using the K3s config file /etc/rancher/k3s/config.yaml, remove any feature-gate=RotateKubeletServerCertificate parameter. If using the command line, remove the K3s flag --kubelet-arg="feature-gate=RotateKubeletServerCertificate". Based on your system, restart the k3s service. For example, systemctl restart k3s.service

4.2.12 Ensure that the Kubelet only makes use of Strong Cryptographic Ciphers (Manual)

Result: PASS

Audit:

journalctl -u k3s -u k3s-agent | grep 'Running kubelet' | tail -n1

Expected Result: '--tls-cipher-suites' contains valid elements from 'TLS_ECDHE_ECDSA_WITH_AES_128_GCM_SHA256,TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256,TLS_ECDHE_ECDSA_WITH_CHACHA20_POLY1305,TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384,TLS_ECDHE_RSA_WITH_CHACHA20_POLY1305,TLS_ECDHE_ECDSA_WITH_AES_256_GCM_SHA384,TLS_RSA_WITH_AES_256_GCM_SHA384,TLS_RSA_WITH_AES_128_GCM_SHA256'

Returned Value:

Aug 09 19:01:30 server-0 k3s[2354]: time="2024-08-09T19:01:30Z" level=info msg="Running kubelet --address=0.0.0.0 --allowed-unsafe-sysctls=net.ipv4.ip_forward,net.ipv6.conf.all.forwarding --anonymous-auth=false --authentication-token-webhook=true --authorization-mode=Webhook --cgroup-driver=systemd --client-ca-file=/var/lib/rancher/k3s/agent/client-ca.crt --cloud-provider=external --cluster-dns=10.43.0.10 --cluster-domain=cluster.local --container-runtime-endpoint=unix:///run/k3s/containerd/containerd.sock --containerd=/run/k3s/containerd/containerd.sock --event-qps=0 --eviction-hard=imagefs.available<5%,nodefs.available<5% --eviction-minimum-reclaim=imagefs.available=10%,nodefs.available=10% --fail-swap-on=false --healthz-bind-address=127.0.0.1 --hostname-override=server-0 --kubeconfig=/var/lib/rancher/k3s/agent/kubelet.kubeconfig --make-iptables-util-chains=true --node-ip=10.10.10.100 --node-labels= --pod-infra-container-image=rancher/mirrored-pause:3.6 --pod-manifest-path=/var/lib/rancher/k3s/agent/pod-manifests --protect-kernel-defaults=true --read-only-port=0 --resolv-conf=/run/systemd/resolve/resolv.conf --serialize-image-pulls=false --streaming-connection-idle-timeout=5m --tls-cert-file=/var/lib/rancher/k3s/agent/serving-kubelet.crt --tls-cipher-suites=TLS_ECDHE_ECDSA_WITH_AES_256_GCM_SHA384,TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384,TLS_ECDHE_ECDSA_WITH_AES_128_GCM_SHA256,TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256,TLS_ECDHE_ECDSA_WITH_CHACHA20_POLY1305,TLS_ECDHE_RSA_WITH_CHACHA20_POLY1305 --tls-private-key-file=/var/lib/rancher/k3s/agent/serving-kubelet.key"

Remediation:

If using a K3s config file /etc/rancher/k3s/config.yaml, edit the file to set TLSCipherSuites to

kubelet-arg:
  - "tls-cipher-suites=TLS_ECDHE_ECDSA_WITH_AES_256_GCM_SHA384,TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384,TLS_ECDHE_ECDSA_WITH_AES_128_GCM_SHA256,TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256,TLS_ECDHE_ECDSA_WITH_CHACHA20_POLY1305,TLS_ECDHE_RSA_WITH_CHACHA20_POLY1305"

or to a subset of these values. If using the command line, add the K3s flag --kubelet-arg="tls-cipher-suites=<same values as above>" Based on your system, restart the k3s service. For example, systemctl restart k3s.service

4.2.13 Ensure that a limit is set on pod PIDs (Manual)

Result: WARN

Remediation: Decide on an appropriate level for this parameter and set it, If using a K3s config file /etc/rancher/k3s/config.yaml, edit the file to set podPidsLimit to

kubelet-arg:
  - "pod-max-pids=<value>"

5.1 RBAC and Service Accounts

5.1.1 Ensure that the cluster-admin role is only used where required (Manual)

Result: WARN

Remediation: Identify all clusterrolebindings to the cluster-admin role. Check if they are used and if they need this role or if they could use a role with fewer privileges. Where possible, first bind users to a lower privileged role and then remove the clusterrolebinding to the cluster-admin role : kubectl delete clusterrolebinding [name]

5.1.2 Minimize access to secrets (Manual)

Result: WARN

Remediation: Where possible, remove get, list and watch access to Secret objects in the cluster.

5.1.3 Minimize wildcard use in Roles and ClusterRoles (Manual)

Result: WARN

Remediation: Where possible replace any use of wildcards in clusterroles and roles with specific objects or actions.

5.1.4 Minimize access to create pods (Manual)

Result: WARN

Remediation: Where possible, remove create access to pod objects in the cluster.

5.1.5 Ensure that default service accounts are not actively used. (Manual)

Result: WARN

Remediation: Create explicit service accounts wherever a Kubernetes workload requires specific access to the Kubernetes API server. Modify the configuration of each default service account to include this value automountServiceAccountToken: false

5.1.6 Ensure that Service Account Tokens are only mounted where necessary (Manual)

Result: WARN

Remediation: Modify the definition of pods and service accounts which do not need to mount service account tokens to disable it.

5.1.7 Avoid use of system:masters group (Manual)

Result: WARN

Remediation: Remove the system:masters group from all users in the cluster.

5.1.8 Limit use of the Bind, Impersonate and Escalate permissions in the Kubernetes cluster (Manual)

Result: WARN

Remediation: Where possible, remove the impersonate, bind and escalate rights from subjects.

5.1.9 Minimize access to create persistent volumes (Manual)

Result: WARN

Remediation: Where possible, remove create access to PersistentVolume objects in the cluster.

5.1.10 Minimize access to the proxy sub-resource of nodes (Manual)

Result: WARN

Remediation: Where possible, remove access to the proxy sub-resource of node objects.

5.1.11 Minimize access to the approval sub-resource of certificatesigningrequests objects (Manual)

Result: WARN

Remediation: Where possible, remove access to the approval sub-resource of certificatesigningrequest objects.

5.1.12 Minimize access to webhook configuration objects (Manual)

Result: WARN

Remediation: Where possible, remove access to the validatingwebhookconfigurations or mutatingwebhookconfigurations objects

5.1.13 Minimize access to the service account token creation (Manual)

Result: WARN

Remediation: Where possible, remove access to the token sub-resource of serviceaccount objects.

5.2 Pod Security Standards

5.2.1 Ensure that the cluster has at least one active policy control mechanism in place (Manual)

Result: WARN

Remediation: Ensure that either Pod Security Admission or an external policy control system is in place for every namespace which contains user workloads.

5.2.2 Minimize the admission of privileged containers (Manual)

Result: WARN

Remediation: Add policies to each namespace in the cluster which has user workloads to restrict the admission of privileged containers.

5.2.3 Minimize the admission of containers wishing to share the host process ID namespace (Automated)

Result: WARN

Remediation: Add policies to each namespace in the cluster which has user workloads to restrict the admission of hostPID containers.

5.2.4 Minimize the admission of containers wishing to share the host IPC namespace (Automated)

Result: WARN

Remediation: Add policies to each namespace in the cluster which has user workloads to restrict the admission of hostIPC containers.

5.2.5 Minimize the admission of containers wishing to share the host network namespace (Automated)

Result: WARN

Remediation: Add policies to each namespace in the cluster which has user workloads to restrict the admission of hostNetwork containers.

5.2.6 Minimize the admission of containers with allowPrivilegeEscalation (Automated)

Result: WARN

Remediation: Add policies to each namespace in the cluster which has user workloads to restrict the admission of containers with .spec.allowPrivilegeEscalation set to true.

5.2.7 Minimize the admission of root containers (Automated)

Result: WARN

Remediation: Create a policy for each namespace in the cluster, ensuring that either MustRunAsNonRoot or MustRunAs with the range of UIDs not including 0, is set.

5.2.8 Minimize the admission of containers with the NET_RAW capability (Automated)

Result: WARN

Remediation: Add policies to each namespace in the cluster which has user workloads to restrict the admission of containers with the NET_RAW capability.

5.2.9 Minimize the admission of containers with added capabilities (Automated)

Result: WARN

Remediation: Ensure that allowedCapabilities is not present in policies for the cluster unless it is set to an empty array.

5.2.10 Minimize the admission of containers with capabilities assigned (Manual)

Result: WARN

Remediation: Review the use of capabilities in applications running on your cluster. Where a namespace contains applications which do not require any Linux capabities to operate consider adding a PSP which forbids the admission of containers which do not drop all capabilities.

5.2.11 Minimize the admission of Windows HostProcess containers (Manual)

Result: WARN

Remediation: Add policies to each namespace in the cluster which has user workloads to restrict the admission of containers that have .securityContext.windowsOptions.hostProcess set to true.

5.2.12 Minimize the admission of HostPath volumes (Manual)

Result: WARN

Remediation: Add policies to each namespace in the cluster which has user workloads to restrict the admission of containers with hostPath volumes.

5.2.13 Minimize the admission of containers which use HostPorts (Manual)

Result: WARN

Remediation: Add policies to each namespace in the cluster which has user workloads to restrict the admission of containers which use hostPort sections.

5.3 Network Policies and CNI

5.3.1 Ensure that the CNI in use supports NetworkPolicies (Manual)

Result: WARN

Remediation: If the CNI plugin in use does not support network policies, consideration should be given to making use of a different plugin, or finding an alternate mechanism for restricting traffic in the Kubernetes cluster.

5.3.2 Ensure that all Namespaces have NetworkPolicies defined (Manual)

Result: WARN

Remediation: Follow the documentation and create NetworkPolicy objects as you need them.

5.4 Secrets Management

5.4.1 Prefer using Secrets as files over Secrets as environment variables (Manual)

Result: WARN

Remediation: If possible, rewrite application code to read Secrets from mounted secret files, rather than from environment variables.

5.4.2 Consider external secret storage (Manual)

Result: WARN

Remediation: Refer to the Secrets management options offered by your cloud provider or a third-party secrets management solution.

5.5 Extensible Admission Control

5.5.1 Configure Image Provenance using ImagePolicyWebhook admission controller (Manual)

Result: WARN

Remediation: Follow the Kubernetes documentation and setup image provenance.

5.7 General Policies

5.7.1 Create administrative boundaries between resources using namespaces (Manual)

Result: WARN

Remediation: Follow the documentation and create namespaces for objects in your deployment as you need them.

5.7.2 Ensure that the seccomp profile is set to docker/default in your Pod definitions (Manual)

Result: WARN

Remediation: Use securityContext to enable the docker/default seccomp profile in your pod definitions. An example is as below: securityContext: seccompProfile: type: RuntimeDefault

5.7.3 Apply SecurityContext to your Pods and Containers (Manual)

Result: WARN

Remediation: Follow the Kubernetes documentation and apply SecurityContexts to your Pods. For a suggested list of SecurityContexts, you may refer to the CIS Security Benchmark for Docker Containers.

5.7.4 The default namespace should not be used (Manual)

Result: WARN

Remediation: Ensure that namespaces are created to allow for appropriate segregation of Kubernetes resources and that all new resources are created in a specific namespace.