22 MetalLB in front of the Kubernetes API server #

This guide demonstrates using a MetalLB service to expose the RKE2/K3s API externally on an HA cluster with three control-plane nodes. To achieve this, a Kubernetes Service of type LoadBalancer and Endpoints will be manually created. The Endpoints keep the IPs of all control plane nodes available in the cluster. For the Endpoint to be continuously synchronized with the events occurring in the cluster (adding/removing a node or a node goes offline), the Endpoint Copier Operator will be deployed. The operator monitors the events happening in the default kubernetes Endpoint and updates the managed one automatically to keep them in sync. Since the managed Service is of type LoadBalancer, MetalLB assigns it a static ExternalIP. This ExternalIP will be used to communicate with the API Server.

22.1 Prerequisites #

Three hosts to deploy RKE2/K3s on top.
- Ensure the hosts have different host names.
- For testing, these could be virtual machines
At least 2 available IPs in the network (one for the Traefik/Nginx and one for the managed service).
Helm

22.2 Installing RKE2/K3s #

Note

If you do not want to use a fresh cluster but want to use an existing one, skip this step and proceed to the next one.

First, a free IP in the network must be reserved that will be used later for ExternalIP of the managed Service.

SSH to the first host and install the wanted distribution in cluster mode.

For RKE2:

# Export the free IP mentioned above
export VIP_SERVICE_IP=<ip>

curl -sfL https://get.rke2.io | INSTALL_RKE2_EXEC="server \
 --write-kubeconfig-mode=644 --tls-san=${VIP_SERVICE_IP} \
 --tls-san=https://${VIP_SERVICE_IP}.sslip.io" sh -

systemctl enable rke2-server.service
systemctl start rke2-server.service

# Fetch the cluster token:
RKE2_TOKEN=$(tr -d '\n' < /var/lib/rancher/rke2/server/node-token)

For K3s:

# Export the free IP mentioned above
export VIP_SERVICE_IP=<ip>
export INSTALL_K3S_SKIP_START=false

curl -sfL https://get.k3s.io | INSTALL_K3S_EXEC="server --cluster-init \
 --disable=servicelb --write-kubeconfig-mode=644 --tls-san=${VIP_SERVICE_IP} \
 --tls-san=https://${VIP_SERVICE_IP}.sslip.io" K3S_TOKEN=foobar sh -

Note

Make sure that --disable=servicelb flag is provided in the k3s server command.

Important

From now on, the commands should be run on the local machine.

To access the API server from outside, the IP of the RKE2/K3s VM will be used.

# Replace <node-ip> with the actual IP of the machine
export NODE_IP=<node-ip>
export KUBE_DISTRIBUTION=<k3s/rke2>

scp ${NODE_IP}:/etc/rancher/${KUBE_DISTRIBUTION}/${KUBE_DISTRIBUTION}.yaml ~/.kube/config && sed \
 -i '' "s/127.0.0.1/${NODE_IP}/g" ~/.kube/config && chmod 600 ~/.kube/config

22.3 Configuring an existing cluster #

Note

This step is valid only if you intend to use an existing RKE2/K3s cluster.

To use an existing cluster the tls-san flags should be modified and also, servicelb LB should be disabled for K3s.

To change the flags for RKE2 or K3s servers, you need to modify either the /etc/systemd/system/rke2.service or /etc/systemd/system/k3s.service file on all the VMs in the cluster, depending on the distribution.

The flags should be inserted in the ExecStart. For example:

For RKE2:

# Replace the <vip-service-ip> with the actual ip
ExecStart=/usr/local/bin/rke2 \
    server \
        '--write-kubeconfig-mode=644' \
        '--tls-san=<vip-service-ip>' \
        '--tls-san=https://<vip-service-ip>.sslip.io' \

For K3s:

# Replace the <vip-service-ip> with the actual ip
ExecStart=/usr/local/bin/k3s \
    server \
        '--cluster-init' \
        '--write-kubeconfig-mode=644' \
        '--disable=servicelb' \
        '--tls-san=<vip-service-ip>' \
        '--tls-san=https://<vip-service-ip>.sslip.io' \

Then the following commands should be executed to load the new configurations:

systemctl daemon-reload
systemctl restart ${KUBE_DISTRIBUTION}

22.4 Installing MetalLB #

To deploy MetalLB, the MetalLB on K3s (Chapter 21, MetalLB on K3s (using L2)) guide can be used.

NOTE: Ensure that the IP addresses of the ip-pool IPAddressPool do not overlap with the IP addresses previously selected for the LoadBalancer service.

Create a separate IpAddressPool that will be used only for the managed Service.

# Export the VIP_SERVICE_IP on the local machine
# Replace with the actual IP
export VIP_SERVICE_IP=<ip>

cat <<-EOF | kubectl apply -f -
apiVersion: metallb.io/v1beta1
kind: IPAddressPool
metadata:
  name: kubernetes-vip-ip-pool
  namespace: metallb-system
spec:
  addresses:
  - ${VIP_SERVICE_IP}/32
  serviceAllocation:
    priority: 100
    namespaces:
      - default
EOF

cat <<-EOF | kubectl apply -f -
apiVersion: metallb.io/v1beta1
kind: L2Advertisement
metadata:
  name: ip-pool-l2-adv
  namespace: metallb-system
spec:
  ipAddressPools:
  - ip-pool
  - kubernetes-vip-ip-pool
EOF

22.5 Installing the Endpoint Copier Operator #

helm install \
endpoint-copier-operator oci://registry.suse.com/edge/3.1/endpoint-copier-operator-chart \
--namespace endpoint-copier-operator \
--create-namespace

The command above will deploy the endpoint-copier-operator operator Deployment with two replicas. One will be the leader and the other will take over the leader role if needed.

Now, the kubernetes-vip Service should be deployed, which will be reconciled by the operator and an Endpoint with the configured ports and IP will be created.

For RKE2:

cat <<-EOF | kubectl apply -f -
apiVersion: v1
kind: Service
metadata:
  name: kubernetes-vip
  namespace: default
spec:
  ports:
  - name: rke2-api
    port: 9345
    protocol: TCP
    targetPort: 9345
  - name: k8s-api
    port: 6443
    protocol: TCP
    targetPort: 6443
  type: LoadBalancer
EOF

For K3s:

cat <<-EOF | kubectl apply -f -
apiVersion: v1
kind: Service
metadata:
  name: kubernetes-vip
  namespace: default
spec:
  internalTrafficPolicy: Cluster
  ipFamilies:
  - IPv4
  ipFamilyPolicy: SingleStack
  ports:
  - name: https
    port: 443
    protocol: TCP
    targetPort: 6443
  sessionAffinity: None
  type: LoadBalancer
EOF

Verify that the kubernetes-vip Service has the correct IP address:

kubectl get service kubernetes-vip -n default \
 -o=jsonpath='{.status.loadBalancer.ingress[0].ip}'

Ensure that the kubernetes-vip and kubernetes Endpoints resources in the default namespace point to the same IPs.

kubectl get endpoints kubernetes kubernetes-vip

If everything is correct, the last thing left is to use the VIP_SERVICE_IP in our Kubeconfig.

sed -i '' "s/${NODE_IP}/${VIP_SERVICE_IP}/g" ~/.kube/config

From now on, all the kubectl will go through the kubernetes-vip service.

22.6 Adding control-plane nodes #

To monitor the entire process, two more terminal tabs can be opened.

First terminal:

watch kubectl get nodes

Second terminal:

watch kubectl get endpoints

Now execute the commands below on the second and third nodes.

For RKE2:

# Export the VIP_SERVICE_IP in the VM
# Replace with the actual IP
export VIP_SERVICE_IP=<ip>

curl -sfL https://get.rke2.io | INSTALL_RKE2_TYPE="server" sh -
systemctl enable rke2-server.service


mkdir -p /etc/rancher/rke2/
cat <<EOF > /etc/rancher/rke2/config.yaml
server: https://${VIP_SERVICE_IP}:9345
token: ${RKE2_TOKEN}
EOF

systemctl start rke2-server.service

For K3s:

# Export the VIP_SERVICE_IP in the VM
# Replace with the actual IP
export VIP_SERVICE_IP=<ip>
export INSTALL_K3S_SKIP_START=false

curl -sfL https://get.k3s.io | INSTALL_K3S_EXEC="server \
 --server https://${VIP_SERVICE_IP}:6443 --disable=servicelb \
 --write-kubeconfig-mode=644" K3S_TOKEN=foobar sh -