Overview

NeuVector 5.x is an open-source container-centric security platform that is integrated with Rancher. NeuVector offers real-time compliance, visibility, and protection for critical applications and data during runtime. NeuVector provides a firewall, container process/file system monitoring, security auditing with CIS benchmarks, and vulnerability scanning. For more information on Rancher security, please see the security documentation.

NeuVector can be enabled through a Helm chart that may be installed either through Apps or through the Cluster Tools button in the Rancher UI. Once the Helm chart is installed, users can easily deploy and manage NeuVector clusters within Rancher.

Installing SUSE® Security with Rancher

The Harvester Helm Chart is used to manage access to the NeuVector UI in Rancher where users can navigate directly to deploy and manage their NeuVector clusters.

To navigate to and install the NeuVector chart through Apps:

Click ☰ > Cluster Management.
On the Clusters page, go to the cluster where you want to deploy NeuVector, and click Explore.
Go to Apps Charts, and install NeuVector from the chart repo.
Different cluster types require different container runtimes. When configuring Helm chart values, go to the Container Runtime section, and select your runtime in accordance with the cluster type. Finally, click Install again.

Some examples are as follows:

RKE1: docker
K3s and RKE2: k3scontainerd
AKS: containerd for v1.19 and up
EKS: docker for v1.22 and below; containerd for v1.23 and up
GKE: containerd (see the Google docs for more)

Only one container runtime engine may be selected at a time during installation.

To navigate to and install the NeuVector chart through Cluster Tools:

Click ☰ > Cluster Management.
On the Clusters page, go to the cluster where you want to deploy NeuVector, and click Explore.
Click on Cluster Tools at the bottom of the left navigation bar.
Repeat step 4 above to select your container runtime accordingly, then click Install again.

Accessing SUSE® Security from the Rancher UI

Navigate to the cluster explorer of the cluster where NeuVector is installed. In the left navigation bar, click NeuVector.
Click the external link to go to the NeuVector UI. Once the link is selected, users must accept the END USER LICENSE AGREEMENT to access the NeuVector UI.

Uninstalling SUSE® Security from the Rancher UI

To uninstall from Apps:

Click ☰ > Cluster Management.
Under Apps, click Installed Apps.
Under cattle-neuvector-system, select both the NeuVector app (and the associated CRD if desired), then click Delete.

To uninstall from Cluster Tools:

Click ☰ > Cluster Management.
Click on Cluster Tools at the bottom-left of the screen, then click on the trash can icon under the NeuVector chart. Select Delete the CRD associated with this app if desired, then click Delete.

GitHub Repository

The NeuVector project is available here.

Documentation

The NeuVector documentation is here.

Architecture

The NeuVector security solution contains four types of security containers: Controllers, Enforcers, Managers, and Scanners. A special container called an All-in-One is also provided to combine the Controller, Enforcer, and Manager functions all in one container, primarily for Docker-native deployments. There is also an Updater which, when run, will update the CVE database.

Controller: Manages the NeuVector Enforcer container; provides REST APIs for the management console.
Enforcer: Enforces security policies.
Manager: Provides a web-UI and CLI console to manage the NeuVector platform.
All-in-One: Includes the Controller, Enforcer, and Manager.
Scanner: Performs the vulnerability and compliance scanning for images, containers, and nodes.
Updater: Updates the CVE database for Neuvector (when run); redeploys scanner pods.

NeuVector Security Containers:

NeuVector Security Containers

NeuVector Architecture:

NeuVector Architecture

To learn more about NeuVector’s architecture, please refer here.

CPU and Memory Allocations

Below are the minimum recommended computing resources for the NeuVector chart installation in a default deployment. Note that the resource limit is not set.

Container	CPU - Request	Memory - Request
Controller	3 (1GB 1vCPU needed per controller)	*
Enforcer	On all nodes (500MB .5vCPU)	1GB
Manager	1 (500MB .5vCPU)	*
Scanner	3 (100MB .5vCPU)	*

Container

CPU - Request

Memory - Request

Controller

3 (1GB 1vCPU needed per controller)

Enforcer

On all nodes (500MB .5vCPU)

1GB

Manager

1 (500MB .5vCPU)

Scanner

3 (100MB .5vCPU)

Minimum 1GB of memory total required for Controller, Manager, and Scanner containers combined.

Hardened Cluster Support - Calico and Canal

RKE1
RKE2

All NeuVector components are deployable if PSP is set to true.

You will need to set additional configuration for your hardened cluster environment as follows:
1. Click ☰ > Cluster Management.
2. Go to the cluster that you created and click Explore.
3. In the left navigation bar, click Apps.
4. Install (or upgrade to) NeuVector version 100.0.1+up2.2.2.
  1. Under Edit Options > Other Configuration, enable Pod Security Policy by checking the box (no other config needed):
5. Click Install at the bottom-right to complete.

NeuVector components Controller and Enforcer are deployable if PSP is set to true.

Applicable to NeuVector chart version 100.0.0+up2.2.0 only:

For Manager, Scanner, and Updater components, additional configuration is required as shown below:
```
kubectl patch deploy neuvector-manager-pod -n cattle-neuvector-system --patch '{"spec":{"template":{"spec":{"securityContext":{"runAsUser": 5400}}}}}'
kubectl patch deploy neuvector-scanner-pod -n cattle-neuvector-system --patch '{"spec":{"template":{"spec":{"securityContext":{"runAsUser": 5400}}}}}'
kubectl patch cronjob neuvector-updater-pod -n cattle-neuvector-system --patch '{"spec":{"jobTemplate":{"spec":{"template":{"spec":{"securityContext":{"runAsUser": 5400}}}}}}}'
```
You will need to set additional configuration for your hardened cluster environment.

You must update your config in both RKE2 and K3s hardened clusters as shown below.
1. Click ☰ > Cluster Management.
2. Go to the cluster that you created and click Explore.
3. In the left navigation bar, click Apps.
4. Install (or upgrade to) NeuVector version 100.0.1+up2.2.2.
  1. Under Edit Options > Other Configuration, enable Pod Security Policy by checking the box. Note that you must also enter a value greater than zero for Manager runAsUser ID, Scanner runAsUser ID, and Updater runAsUser ID:
5. Click Install at the bottom-right to complete.

SELinux-enabled Cluster Support - Calico and Canal

To enable SELinux on RKE2 clusters, follow the steps below:

NeuVector components Controller and Enforcer are deployable if PSP is set to true.

Applicable to NeuVector chart version 100.0.0+up2.2.0 only:

For Manager, Scanner, and Updater components, additional configuration is required as shown below:

kubectl patch deploy neuvector-manager-pod -n cattle-neuvector-system --patch '{"spec":{"template":{"spec":{"securityContext":{"runAsUser": 5400}}}}}'
kubectl patch deploy neuvector-scanner-pod -n cattle-neuvector-system --patch '{"spec":{"template":{"spec":{"securityContext":{"runAsUser": 5400}}}}}'
kubectl patch cronjob neuvector-updater-pod -n cattle-neuvector-system --patch '{"spec":{"jobTemplate":{"spec":{"template":{"spec":{"securityContext":{"runAsUser": 5400}}}}}}}'

Cluster Support in an Air-Gapped Environment

All NeuVector components are deployable on a cluster in an air-gapped environment without any additional configuration needed.

Support Limitations

Only admins and cluster owners are currently supported.
Fleet multi-cluster deployment is not supported.
NeuVector is not supported on a Windows cluster.

Other Limitations

Currently, NeuVector feature chart installation fails when a NeuVector partner chart already exists. To work around this issue, uninstall the NeuVector partner chart and reinstall the NeuVector feature chart.
Sometimes when the controllers are not ready, the NeuVector UI is not accessible from the Rancher UI. During this time, controllers will try to restart, and it takes a few minutes for the controllers to be active.
Container runtime is not auto-detected for different cluster types when installing the NeuVector chart. To work around this, you can specify the runtime manually.