Jump to contentJump to page navigation: previous page [access key p]/next page [access key n]
documentation.suse.com / SUSE Linux Enterprise Desktop Documentation / Administration Guide / Common tasks / Bash and Bash scripts
Applies to SUSE Linux Enterprise Desktop 15 SP5

1 Bash and Bash scripts

  

Today, many people use computers with a graphical user interface (GUI) like GNOME. Although GUIs offer many features, they are limited when performing automated task execution. Shells complement GUIs well, and this chapter gives an overview of several aspects of shells, in this case the Bash shell.

1.1 What is “the shell”?

  

Traditionally, the Linux shell is Bash (Bourne again Shell). When this chapter speaks about “the shell” it means Bash. There are more shells available (ash, csh, ksh, zsh, …), each employing different features and characteristics.

1.1.1 Bash configuration files

  

A shell can be invoked as an:

  1. Interactive login shell.  This is used when logging in to a machine, invoking Bash with the --login option or when logging in to a remote machine with SSH.

  2. Interactive non-login shell.  This is normally the case when starting xterm, konsole, gnome-terminal, or similar command line interface (CLI) tools.

  3. Non-interactive non-login shell.  This is invoked when invoking a shell script at the command line.

Each shell reads different configuration files. The following tables show the login and non-login shell configuration files.

Tip
Tip

Bash looks for its configuration files in a specific order depending on the type of shell where it is run. Find more details on the Bash man page (man 1 bash). Search for the headline INVOCATION.

Table 1.1: Bash configuration files for login shells
  

File

Description

/etc/profile

Do not modify this file, otherwise your modifications may be destroyed during your next update!

/etc/profile.local

Use this file if you extend /etc/profile

/etc/profile.d/

Contains system-wide configuration files for specific programs

~/.profile

Insert user specific configuration for login shells here

The login shell also sources the configuration files listed under Table 1.2, “Bash configuration files for non-login shells”.

Table 1.2: Bash configuration files for non-login shells
  

/etc/bash.bashrc

Do not modify this file, otherwise your modifications may be destroyed during your next update.

/etc/bash.bashrc.local

Use this file to insert your system-wide modifications for Bash only

~/.bashrc

Insert user specific configuration here

Additionally, Bash uses multiple files:

Table 1.3: Special files for Bash
  

File

Description

~/.bash_history

Contains a list of all commands you have typed

~/.bash_logout

Executed when logging out

~/.alias

User defined aliases of frequently used commands. See man 1 alias for more details about defining aliases.

No-Login Shells

There are special shells that block users from logging into the system: /bin/false and /sbin/nologin. Both fail silently when the user attempts to log into the system. This was intended as a security measure for system users, though modern Linux operating systems have more effective tools for controlling system access, such as PAM and AppArmor.

The default on SUSE Linux Enterprise Desktop is to assign /bin/bash to human users, and /bin/false or /sbin/nologin to system users. The nobody user has /bin/bash for historical reasons, as it is a user with minimum privileges that used to be the default for system users. However, whatever little bit of security gained by using nobody is lost when multiple system users use it. It should be possible to change it to /sbin/nologin; the fastest way to test it is change it and see if it breaks any services or applications.

Use the following command to list which shells are assigned to all users, system and human users, in /etc/passwd. The output varies according to the services and users on your system: 

> sort -t: -k 7 /etc/passwd | awk -F: '{print $1"\t" $7}' | column -t
tux               /bin/bash
nobody            /bin/bash
root              /bin/bash
avahi             /bin/false
chrony            /bin/false
dhcpd             /bin/false
dnsmasq           /bin/false
ftpsecure         /bin/false
lightdm           /bin/false
mysql             /bin/false
postfix           /bin/false
rtkit             /bin/false
sshd              /bin/false
tftp              /bin/false
unbound           /bin/false
bin               /sbin/nologin
daemon            /sbin/nologin
ftp               /sbin/nologin
lp                /sbin/nologin
mail              /sbin/nologin
man               /sbin/nologin
nscd              /sbin/nologin
polkitd           /sbin/nologin
pulse             /sbin/nologin
qemu              /sbin/nologin
radvd             /sbin/nologin
rpc               /sbin/nologin
statd             /sbin/nologin
svn               /sbin/nologin
systemd-coredump  /sbin/nologin
systemd-network   /sbin/nologin
systemd-timesync  /sbin/nologin
usbmux            /sbin/nologin
vnc               /sbin/nologin
wwwrun            /sbin/nologin
messagebus        /usr/bin/false
scard             /usr/sbin/nologin

1.1.2 The directory structure

  

The following table provides a short overview of the most important higher-level directories that you find on a Linux system. Find more detailed information about the directories and important subdirectories in the following list.

Table 1.4: Overview of a standard directory tree
  

Directory

Contents

/

Root directory—the starting point of the directory tree.

/bin

Essential binary files, such as commands that are needed by both the system administrator and normal users. Usually also contains the shells, such as Bash.

/boot

Static files of the boot loader.

/dev

Files needed to access host-specific devices.

/etc

Host-specific system configuration files.

/home

Holds the home directories of all users who have accounts on the system. However, root's home directory is not located in /home but in /root.

/lib

Essential shared libraries and kernel modules.

/media

Mount points for removable media.

/mnt

Mount point for temporarily mounting a file system.

/opt

Add-on application software packages.

/root

Home directory for the superuser root.

/sbin

Essential system binaries.

/srv

Data for services provided by the system.

/tmp

Temporary files.

/usr

Secondary hierarchy with read-only data.

/var

Variable data such as log files.

/windows

Only available if you have both Microsoft Windows* and Linux installed on your system. Contains the Windows data.

The following list provides more detailed information and gives some examples of which files and subdirectories can be found in the directories:

/bin

Contains the basic shell commands that may be used both by root and by other users. These commands include ls, mkdir, cp, mv, rm and rmdir. /bin also contains Bash, the default shell in SUSE Linux Enterprise Desktop.

/boot

Contains data required for booting, such as the boot loader, the kernel, and other data that is used before the kernel begins executing user-mode programs.

/dev

Holds device files that represent hardware components.

/etc

Contains local configuration files that control the operation of programs like the X Window System. The /etc/init.d subdirectory contains LSB init scripts that can be executed during the boot process.

/home/USERNAME

Holds the private data of every user who has an account on the system. The files located here can only be modified by their owner or by the system administrator. By default, your e-mail directory and personal desktop configuration are located here in the form of hidden files and directories, such as .gconf/ and .config.

Note
Note: Home directory in a network environment

If you are working in a network environment, your home directory may be mapped to a directory in the file system other than /home.

/lib

Contains the essential shared libraries needed to boot the system and to run the commands in the root file system. The Windows equivalent for shared libraries are DLL files.

/media

Contains mount points for removable media, such as CD-ROMs, flash disks, and digital cameras (if they use USB). /media generally holds any type of drive except the hard disk of your system. When your removable medium has been inserted or connected to the system and has been mounted, you can access it from here.

/mnt

This directory provides a mount point for a temporarily mounted file system. root may mount file systems here.

/opt

Reserved for the installation of third-party software. Optional software and larger add-on program packages can be found here.

/root

Home directory for the root user. The personal data of root is located here.

/run

A tmpfs directory used by systemd and various components. /var/run is a symbolic link to /run.

/sbin

As the s indicates, this directory holds utilities for the superuser. /sbin contains the binaries essential for booting, restoring and recovering the system in addition to the binaries in /bin.

/srv

Holds data for services provided by the system, such as FTP and HTTP.

/tmp

This directory is used by programs that require temporary storage of files.

Important
Important: Cleaning up /tmp at boot time

Data stored in /tmp is not guaranteed to survive a system reboot. It depends, for example, on settings made in /etc/tmpfiles.d/tmp.conf.

/usr

/usr has nothing to do with users, but is the acronym for Unix system resources. The data in /usr is static, read-only data that can be shared among various hosts compliant with the Filesystem Hierarchy Standard (FHS). This directory contains all application programs including the graphical desktops such as GNOME and establishes a secondary hierarchy in the file system. /usr holds several subdirectories, such as /usr/bin, /usr/sbin, /usr/local, and /usr/share/doc.

/usr/bin

Contains generally accessible programs.

/usr/sbin

Contains programs reserved for the system administrator, such as repair functions.

/usr/local

In this directory the system administrator can install local, distribution-independent extensions.

/usr/share/doc

Holds various documentation files and the release notes for your system. In the manual subdirectory find an online version of this manual. If more than one language is installed, this directory may contain versions of the manuals for different languages.

Under packages find the documentation included in the software packages installed on your system. For every package, a subdirectory /usr/share/doc/packages/PACKAGENAME is created that often holds README files for the package and sometimes examples, configuration files or additional scripts.

If HOWTOs are installed on your system /usr/share/doc also holds the howto subdirectory in which to find additional documentation on many tasks related to the setup and operation of Linux software.

/var

Whereas /usr holds static, read-only data, /var is for data which is written during system operation and thus is variable data, such as log files or spooling data. For an overview of the most important log files you can find under /var/log/, refer to Table 42.1, “Log files”.

/windows

Only available if you have both Microsoft Windows and Linux installed on your system. Contains the Windows data available on the Windows partition of your system. Whether you can edit the data in this directory depends on the file system your Windows partition uses. If it is FAT32, you can open and edit the files in this directory. For NTFS, SUSE Linux Enterprise Desktop also includes write access support. However, the driver for the NTFS-3g file system has limited functionality.

1.2 Writing shell scripts

  

Shell scripts provide a convenient way to perform a wide range of tasks: collecting data, searching for a word or phrase in a text and other useful things. The following example shows a small shell script that prints a text:

Example 1.1: A shell script printing a text
  
#!/bin/sh 1
# Output the following line: 2
echo "Hello World" 3

1

The first line begins with the Shebang characters (#!) which indicate that this file is a script. The interpreter, specified after the Shebang, executes the script. In this case, the specified interpreter is /bin/sh.

2

The second line is a comment beginning with the hash sign. We recommend that you comment difficult lines. With proper commenting, you can remember the purpose and function of the line. Also, other readers can better understand your script. Commenting is considered good practice in the development community.

3

The third line uses the built-in command echo to print the corresponding text.

Before you can run this script, there are a few prerequisites:

  1. Every script should contain a Shebang line (as in the example above). If the line is missing, you need to call the interpreter manually.

  2. You can save the script wherever you want. However, it is a good idea to save it in a directory where the shell can find it. The search path in a shell is determined by the environment variable PATH. A normal user does not have write access to /usr/bin. Therefore it is recommended to save your scripts in the users' directory ~/bin/. The above example gets the name hello.sh.

  3. The script needs executable permissions. Set the permissions with the following command: 

    > chmod +x ~/bin/hello.sh

If you have fulfilled all the above prerequisites, you can execute the script in the following ways:

  1. As absolute path.  The script can be executed with an absolute path. In our case, it is ~/bin/hello.sh.

  2. Everywhere.  If the PATH environment variable contains the directory where the script is located, you can execute the script with hello.sh.

1.3 Redirecting command events

  

Each command can use three channels, either for input or output:

  • Standard output.  This is the default output channel. Whenever a command prints something, it uses the standard output channel.

  • Standard input.  If a command needs input from users or other commands, it uses this channel.

  • Standard error.  Commands use this channel for error reporting.

To redirect these channels, there are the following possibilities:

Command > File

Saves the output of the command into a file, the existing file is deleted. For example, the ls command writes its output into the file listing.txt: 

> ls > listing.txt
Command >> File

Appends the output of the command to a file. For example, the ls command appends its output to the file listing.txt: 

> ls >> listing.txt
Command < File

Reads the file as input for the given command. For example, the read command reads in the content of the file into the variable: 

> read a < foo
Command1 | Command2

Redirects the output of the left command as input for the right command. For example, the cat command outputs the content of the /proc/cpuinfo file. This output is used by grep to filter only those lines which contain cpu: 

> cat /proc/cpuinfo | grep cpu

Every channel has a file descriptor: 0 (zero) for standard input, 1 for standard output and 2 for standard error. It is allowed to insert this file descriptor before a < or > character. For example, the following line searches for a file starting with foo, but suppresses its errors by redirecting it to /dev/null: 

> find / -name "foo*" 2>/dev/null

1.4 Using aliases

  

An alias is a shortcut definition of one or more commands. The syntax for an alias is: 

alias NAME=DEFINITION

For example, the following line defines an alias lt that outputs a long listing (option -l), sorts it by modification time (-t), and prints it in reverse sorted order (-r): 

> alias lt='ls -ltr'

To view all alias definitions, use alias. Remove your alias with unalias and the corresponding alias name.

1.5 Using variables in Bash

  

A shell variable can be global or local. Global variables, or environment variables, can be accessed in all shells. In contrast, local variables are visible in the current shell only.

To view all environment variables, use the printenv command. If you need to know the value of a variable, insert the name of your variable as an argument: 

> printenv PATH

A variable, be it global or local, can also be viewed with echo: 

> echo $PATH

To set a local variable, use a variable name followed by the equal sign, followed by the value: 

> PROJECT="SLED"

Do not insert spaces around the equal sign, otherwise you get an error. To set an environment variable, use export: 

> export NAME="tux"

To remove a variable, use unset: 

> unset NAME

The following table contains common environment variables that you can use in you shell scripts:

Table 1.5: Useful environment variables
  

HOME

the home directory of the current user

HOST

the current host name

LANG

when a tool is localized, it uses the language from this environment variable. English can also be set to C

PATH

the search path of the shell, a list of directories separated by colon

PS1

specifies the normal prompt printed before each command

PS2

specifies the secondary prompt printed when you execute a multi-line command

PWD

current working directory

USER

the current user

1.5.1 Using argument variables

  

For example, if you have the script foo.sh you can execute it like this: 

> foo.sh "Tux Penguin" 2000

To access all the arguments which are passed to your script, you need positional parameters. These are $1 for the first argument, $2 for the second, and so on. You can have up to nine parameters. To get the script name, use $0.

The following script foo.sh prints all arguments from 1 to 4: 

#!/bin/sh
echo \"$1\" \"$2\" \"$3\" \"$4\"

If you execute this script with the above arguments, you get: 

"Tux Penguin" "2000" "" ""

1.5.2 Using variable substitution

  

Variable substitutions apply a pattern to the content of a variable either from the left or right side. The following list contains the possible syntax forms:

${VAR#pattern}

removes the shortest possible match from the left: 

> file=/home/tux/book/book.tar.bz2
> echo ${file#*/}
home/tux/book/book.tar.bz2
${VAR##pattern}

removes the longest possible match from the left: 

> file=/home/tux/book/book.tar.bz2
> echo ${file##*/}
book.tar.bz2
${VAR%pattern}

removes the shortest possible match from the right: 

> file=/home/tux/book/book.tar.bz2
> echo ${file%.*}
/home/tux/book/book.tar
${VAR%%pattern}

removes the longest possible match from the right: 

> file=/home/tux/book/book.tar.bz2
> echo ${file%%.*}
/home/tux/book/book
${VAR/pattern_1/pattern_2}

substitutes the content of VAR from the PATTERN_1 with PATTERN_2: 

> file=/home/tux/book/book.tar.bz2
> echo ${file/tux/wilber}
/home/wilber/book/book.tar.bz2

1.6 Grouping and combining commands

  

Shells allow you to concatenate and group commands for conditional execution. Each command returns an exit code which determines the success or failure of its operation. If it is 0 (zero) the command was successful, everything else marks an error which is specific to the command.

The following list shows, how commands can be grouped:

Command1 ; Command2

executes the commands in sequential order. The exit code is not checked. The following line displays the content of the file with cat and then prints its file properties with ls regardless of their exit codes: 

> cat filelist.txt ; ls -l filelist.txt
Command1 && Command2

runs the right command, if the left command was successful (logical AND). The following line displays the content of the file and prints its file properties only, when the previous command was successful (compare it with the previous entry in this list): 

> cat filelist.txt && ls -l filelist.txt
Command1 || Command2

runs the right command, when the left command has failed (logical OR). The following line creates only a directory in /home/wilber/bar when the creation of the directory in /home/tux/foo has failed: 

> mkdir /home/tux/foo || mkdir /home/wilber/bar
funcname(){ ... }

creates a shell function. You can use the positional parameters to access its arguments. The following line defines the function hello to print a short message: 

> hello() { echo "Hello $1"; }

You can call this function like this: 

> hello Tux

which prints: 

Hello Tux

1.7 Working with common flow constructs

  

To control the flow of your script, a shell has while, if, for and case constructs.

1.7.1 The if control command

  

The if command is used to check expressions. For example, the following code tests whether the current user is Tux: 

if test $USER = "tux"; then
  echo "Hello Tux."
else
  echo "You are not Tux."
fi

The test expression can be as complex or simple as possible. The following expression checks if the file foo.txt exists: 

if test -e /tmp/foo.txt ; then
  echo "Found foo.txt"
fi

The test expression can also be abbreviated in square brackets: 

if [ -e /tmp/foo.txt ] ; then
  echo "Found foo.txt"
fi

Find more useful expressions at https://bash.cyberciti.biz/guide/If..else..fi.

1.7.2 Creating loops with the for command

  

The for loop allows you to execute commands to a list of entries. For example, the following code prints certain information about PNG files in the current directory: 

for i in *.png; do
 ls -l $i
done

1.8 More information

  

Important information about Bash is provided in the man pages man bash. More about this topic can be found in the following list: