ISO Installation

SUSE Virtualization ships as a bootable appliance image, you can install it directly on a bare metal server with the ISO image. To get the ISO image, download 💿 harvester-v1.x.x-amd64.iso from the Releases page.

During the installation, you can either choose to create a new cluster or join the node to an existing cluster.

The following video shows a quick overview of an ISO installation.

Installation Steps

  1. Mount the ISO file and boot the server by selecting the Harvester Installer option.

    iso-install.png

    The installer automatically checks the hardware and displays warning messages if the minimum requirements are not met. The Hardware Checks screen is not displayed if all checks are passed.

    hardware-checks.png

  2. Use the arrow keys to choose an installation mode. By default, the first node will be the management node of the cluster.

    choose-installation-mode.png

    • Create a new Harvester cluster: creates an entirely new cluster.

    • Join an existing Harvester cluster: joins an existing cluster. You need the VIP and cluster token of the cluster you want to join.

    • Install Harvester binaries only: If you choose this option, additional setup is required after the first bootup.

    When there are 3 nodes, the other 2 nodes added first are automatically promoted to management nodes to form an HA cluster. If you want to promote management nodes from different zones, you can add the node label topology.kubernetes.io/zone in the os.labels config by providing a URL of configuration file on the customize the host step. In this case, at least three different zones are required.

  3. Choose a role for the node. You are required to perform this step if you selected the installation mode Join an existing Harvester cluster.

    choose-node-role.png

    • Default Role: Allows a node to function as a management node or a worker node. This role does not have any specific privileges or restrictions.

    • Management Role: Allows a node to be prioritized when SUSE Virtualization promotes nodes to management nodes.

    • Witness Role: Restricts a node to being a witness node (only functions as an etcd node) in a specific cluster.

    • Worker Role: Restricts a node to being a worker node (never promoted to management node) in a specific cluster.

  4. Choose the installation disk you want to install the cluster on and the data disk you want to store VM data on. By default, SUSE Virtualization uses GUID Partition Table (GPT) partitioning schema for both UEFI and BIOS. If you use the BIOS boot, then you will have the option to select Master boot record (MBR).

    choose-installation-target-data-disk.png

    • Installation disk: The disk to install the cluster on.

    • Data disk: The disk to store VM data on. Choosing a separate disk to store VM data is recommended.

    • Persistent size: If you only have one disk or use the same disk for both OS and VM data, you need to configure persistent partition size to store system packages and container images. The default and minimum persistent partition size is 150 GiB. You can specify a size like 200Gi or 153600Mi.

  5. Configure the HostName of the node.

    config-hostname.png

  6. Configure network interface(s) for the management network. By default, SUSE Virtualization creates a bonded NIC named mgmt-bo for the built-in management cluster network, and the IP address can be configured via DHCP or statically assigned.

    config-network.png

    It is not possible to change the node IP throughout the lifecycle of a cluster. If using DHCP, you must ensure the DHCP server always offers the same IP for the same node. If the node IP is changed, the related node cannot join the cluster and might even break the cluster.

    In addition, you are required to add the routers option (option routers) when configuring the DHCP server. This option is used to add the default route on the host. Without the default route, the node will fail to start.

    For example:

    Linux~ # ip route
default via 192.168.122.1 dev mgmt-br proto dhcp

    For more information, see DHCP Server Configuration.

  7. (Optional) Configure the DNS Servers. Use commas as a delimiter to add more DNS servers. Leave it blank to use the default DNS server.

    config-dns-server.png

  8. Configure the virtual IP (VIP) by selecting a VIP Mode. This VIP is used to access the cluster or for other nodes to join the cluster.

    If using DHCP to configure the IP address, you need to configure a static MAC-to-IP address mapping on your DHCP server to have a persistent virtual IP (VIP), and the VIP must be unique.
    config-virtual-ip.png

  9. Configure the Cluster token. This token is used for adding other nodes to the cluster.

    config-cluster-token.png

  10. Configure and confirm a Password to access the node. The default SSH user is rancher.

    config-password.png

  11. Configure NTP servers to make sure all nodes' times are synchronized. This defaults to 0.suse.pool.ntp.org. Use commas as a delimiter to add more NTP servers.

    config-ntp-server.png

  12. (Optional) If you need to use an HTTP proxy to access the outside world, enter the Proxy address. Otherwise, leave this blank.

    config-proxy.png

  13. (Optional) You can choose to import SSH keys by providing HTTP URL. For example, your GitHub public keys https://github.com/<username>.keys can be used.

    import-ssh-keys.png

  14. (Optional) If you need to customize the host with a configuration file, enter the HTTP URL here.

    remote-config.png

  15. Review and confirm your installation options. After confirming the installation options, SUSE Virtualization will be installed to your host. The installation may take a few minutes to be complete.

    confirm-install.png

  16. Once the installation is complete, your node restarts. After the restart, the console displays the management URL and status. The default URL of the web interface is https://your-virtual-ip. You can use F12 to switch from the console to the Shell and type exit to go back to the console.

    Choosing Install Harvester binaries only on the first page requires additional setup after the first bootup.
    iso-installed.png

  17. You will be prompted to set the password for the default admin user when logging in for the first time.

    first-login.png

Known Issue

Installer may crash when using an older graphics card/monitor

In some cases, if you are using an older graphics card/monitor, you may encounter a panic: invalid dimensions error during ISO installation.

invalid-dimensions.png

We are working on this known issue and planning a fix for a future release. You can try to use another GRUB entry to force it to use the resolution of 1024x768 when booting up.

force-resolution.png

If you are using a version earlier than v1.1.1, please try the following workaround:

  1. Boot up with the ISO, and press E to edit the first menu entry:

    grub-menu.png

  2. Append vga=792 to the line started with $linux:

    edit-menu-entry.png

  3. Press Ctrl+X or F10 to boot up.

Fail to join nodes using FQDN to a cluster which has custom SSL certificate configured

You may encounter that newly joined nodes stay in the Not Ready state indefinitely. This is likely the outcome if you already have a set of custom SSL certificates configured on the to-be-joined cluster and provide an FQDN instead of a VIP address for the management address during installation.

Joining nodes stuck at the "NotReady" state

You can check the SSL certificates on the UI or using the command kubectl get settings.harvesterhci.io ssl-certificates to see if there is any custom SSL certificate configured (by default, it is empty).

The SSL certificate setting

The second thing to look at is the joining nodes. Try to get access to the nodes via consoles or SSH sessions and then check the log of rancherd:

$ journalctl -u rancherd.service
Oct 06 03:36:06 node-0 systemd[1]: Starting Rancher Bootstrap...
Oct 06 03:36:06 node-0 rancherd[2171]: time="2023-10-06T03:36:06Z" level=info msg="Loading config file [/usr/share/rancher/rancherd/config.yaml.d/50-defaults.yaml]"
Oct 06 03:36:06 node-0 rancherd[2171]: time="2023-10-06T03:36:06Z" level=info msg="Loading config file [/usr/share/rancher/rancherd/config.yaml.d/91-harvester-bootstrap-repo.yaml]"
Oct 06 03:36:06 node-0 rancherd[2171]: time="2023-10-06T03:36:06Z" level=info msg="Loading config file [/etc/rancher/rancherd/config.yaml]"
Oct 06 03:36:06 node-0 rancherd[2171]: time="2023-10-06T03:36:06Z" level=info msg="Bootstrapping Rancher (v2.7.5/v1.25.9+rke2r1)"
Oct 06 03:36:08 node-0 rancherd[2171]: time="2023-10-06T03:36:08Z" level=info msg="Writing plan file to /var/lib/rancher/rancherd/plan/plan.json"
Oct 06 03:36:08 node-0 rancherd[2171]: time="2023-10-06T03:36:08Z" level=info msg="Applying plan with checksum "
Oct 06 03:36:08 node-0 rancherd[2171]: time="2023-10-06T03:36:08Z" level=info msg="No image provided, creating empty working directory /var/lib/rancher/rancherd/plan/work/20231006-033608-applied.plan/_0"
Oct 06 03:36:08 node-0 rancherd[2171]: time="2023-10-06T03:36:08Z" level=info msg="Running command: /usr/bin/env [sh /var/lib/rancher/rancherd/install.sh]"
Oct 06 03:36:08 node-0 rancherd[2171]: time="2023-10-06T03:36:08Z" level=info msg="[stdout]: [INFO]  Using default agent configuration directory /etc/rancher/agent"
Oct 06 03:36:08 node-0 rancherd[2171]: time="2023-10-06T03:36:08Z" level=info msg="[stdout]: [INFO]  Using default agent var directory /var/lib/rancher/agent"
Oct 06 03:36:08 node-0 rancherd[2171]: time="2023-10-06T03:36:08Z" level=info msg="[stderr]: [WARN]  /usr/local is read-only or a mount point; installing to /opt/rancher-system-agent"
Oct 06 03:36:08 node-0 rancherd[2171]: time="2023-10-06T03:36:08Z" level=info msg="[stdout]: [INFO]  Determined CA is necessary to connect to Rancher"
Oct 06 03:36:08 node-0 rancherd[2171]: time="2023-10-06T03:36:08Z" level=info msg="[stdout]: [INFO]  Successfully downloaded CA certificate"
Oct 06 03:36:08 node-0 rancherd[2171]: time="2023-10-06T03:36:08Z" level=info msg="[stdout]: [INFO]  Value from https://harvester.192.168.48.240.sslip.io:443/cacerts is an x509 certificate"
Oct 06 03:36:08 node-0 rancherd[2171]: time="2023-10-06T03:36:08Z" level=info msg="[stdout]: [INFO]  Successfully tested Rancher connection"
Oct 06 03:36:08 node-0 rancherd[2171]: time="2023-10-06T03:36:08Z" level=info msg="[stdout]: [INFO]  Downloading rancher-system-agent binary from https://harvester.192.168.48.240.sslip.io:443/assets/rancher-system-agent-amd64"
Oct 06 03:36:08 node-0 rancherd[2171]: time="2023-10-06T03:36:08Z" level=info msg="[stdout]: [INFO]  Successfully downloaded the rancher-system-agent binary."
Oct 06 03:36:08 node-0 rancherd[2171]: time="2023-10-06T03:36:08Z" level=info msg="[stdout]: [INFO]  Downloading rancher-system-agent-uninstall.sh script from https://harvester.192.168.48.240.sslip.io:443/assets/system-agent-uninstall.sh"
Oct 06 03:36:08 node-0 rancherd[2171]: time="2023-10-06T03:36:08Z" level=info msg="[stdout]: [INFO]  Successfully downloaded the rancher-system-agent-uninstall.sh script."
Oct 06 03:36:08 node-0 rancherd[2171]: time="2023-10-06T03:36:08Z" level=info msg="[stdout]: [INFO]  Generating Cattle ID"
Oct 06 03:36:09 node-0 rancherd[2171]: time="2023-10-06T03:36:09Z" level=info msg="[stdout]: [INFO]  Successfully downloaded Rancher connection information"
Oct 06 03:36:09 node-0 rancherd[2171]: time="2023-10-06T03:36:09Z" level=info msg="[stdout]: [INFO]  systemd: Creating service file"
Oct 06 03:36:09 node-0 rancherd[2171]: time="2023-10-06T03:36:09Z" level=info msg="[stdout]: [INFO]  Creating environment file /etc/systemd/system/rancher-system-agent.env"
Oct 06 03:36:09 node-0 rancherd[2171]: time="2023-10-06T03:36:09Z" level=info msg="[stdout]: [INFO]  Enabling rancher-system-agent.service"
Oct 06 03:36:09 node-0 rancherd[2171]: time="2023-10-06T03:36:09Z" level=info msg="[stderr]: Created symlink /etc/systemd/system/multi-user.target.wants/rancher-system-agent.service → /etc/systemd/system/rancher-system-agent.service."
Oct 06 03:36:09 node-0 rancherd[2171]: time="2023-10-06T03:36:09Z" level=info msg="[stdout]: [INFO]  Starting/restarting rancher-system-agent.service"
Oct 06 03:36:09 node-0 rancherd[2171]: time="2023-10-06T03:36:09Z" level=info msg="No image provided, creating empty working directory /var/lib/rancher/rancherd/plan/work/20231006-033608-applied.plan/_1"
Oct 06 03:36:09 node-0 rancherd[2171]: time="2023-10-06T03:36:09Z" level=info msg="Running command: /usr/bin/rancherd [probe]"
Oct 06 03:36:09 node-0 rancherd[2171]: time="2023-10-06T03:36:09Z" level=info msg="[stderr]: time=\"2023-10-06T03:36:09Z\" level=info msg=\"Running probes defined in /var/lib/rancher/rancherd/plan/plan.json\""
Oct 06 03:36:10 node-0 rancherd[2171]: time="2023-10-06T03:36:10Z" level=info msg="[stderr]: time=\"2023-10-06T03:36:10Z\" level=info msg=\"Probe [kubelet] is unhealthy\""

The above log shows that rancherd is waiting for kubelet to become healthy. rancherd is doing nothing wrong and is working as expected. The next step is to check the rancher-system-agent:

$ journalctl -u rancher-system-agent.service
Oct 06 03:43:51 node-0 systemd[1]: rancher-system-agent.service: Scheduled restart job, restart counter is at 88.
Oct 06 03:43:51 node-0 systemd[1]: Stopped Rancher System Agent.
Oct 06 03:43:51 node-0 systemd[1]: Started Rancher System Agent.
Oct 06 03:43:51 node-0 rancher-system-agent[4164]: time="2023-10-06T03:43:51Z" level=info msg="Rancher System Agent version v0.3.3 (9e827a5) is starting"
Oct 06 03:43:51 node-0 rancher-system-agent[4164]: time="2023-10-06T03:43:51Z" level=info msg="Using directory /var/lib/rancher/agent/work for work"
Oct 06 03:43:51 node-0 rancher-system-agent[4164]: time="2023-10-06T03:43:51Z" level=info msg="Starting remote watch of plans"
Oct 06 03:43:51 node-0 rancher-system-agent[4164]: time="2023-10-06T03:43:51Z" level=info msg="Initial connection to Kubernetes cluster failed with error Get \"https://harvester.192.168.48.240.sslip.io/version\": x509: certificate signed by unknown authority, removing CA data and trying again"
Oct 06 03:43:51 node-0 rancher-system-agent[4164]: time="2023-10-06T03:43:51Z" level=fatal msg="error while connecting to Kubernetes cluster with nullified CA data: Get \"https://harvester.192.168.48.240.sslip.io/version\": x509: certificate signed by unknown authority"
Oct 06 03:43:51 node-0 systemd[1]: rancher-system-agent.service: Main process exited, code=exited, status=1/FAILURE
Oct 06 03:43:51 node-0 systemd[1]: rancher-system-agent.service: Failed with result 'exit-code'.

If you see a similar log output, you need to manually add the CA to the trust list on each joining node with the following commands:

# prepare the CA as embedded-rancher-ca.pem on the nodes
$ sudo cp embedded-rancher-ca.pem /etc/pki/trust/anchors/
$ sudo update-ca-certificates

After adding the CA to the trust list, the nodes can join to the cluster successfully.