7 Virtualization limits and support #
QEMU is only supported when used for virtualization together with the KVM or Xen hypervisors. The TCG accelerator is not supported, even when it is distributed within SUSE products. Users must not rely on QEMU TCG to provide guest isolation, or for any security guarantees. See also https://qemu-project.gitlab.io/qemu/system/security.html.
7.1 Architecture support #
7.1.1 KVM hardware requirements #
Currently, SUSE supports KVM full virtualization on AMD64/Intel 64, AArch64, IBM Z and IBM LinuxONE hosts.
On the AMD64/Intel 64 architecture, KVM is designed around hardware virtualization features included in AMD* (AMD-V) and Intel* (VT-x) CPUs. It supports virtualization features of chipsets and PCI devices, such as an I/O Memory Mapping Unit (IOMMU) and Single Root I/O Virtualization (SR-IOV). You can test whether your CPU supports hardware virtualization with the following command:
>egrep '(vmx|svm)' /proc/cpuinfoIf this command returns no output, your processor either does not support hardware virtualization, or this feature has been disabled in the BIOS or firmware.
The following Web sites identify AMD64/Intel 64 processors that support hardware virtualization: http://ark.intel.com/Products/VirtualizationTechnology (for Intel CPUs), and http://products.amd.com/ (for AMD CPUs).
On the Arm architecture, Armv8-A processors include support for virtualization.
On the Arm architecture, we only support running QEMU/KVM via the CPU model
host(it is namedhost-passthroughin Virtual Machine Manager orlibvirt).
The KVM kernel modules only load if the CPU hardware virtualization features are available.
The general minimum hardware requirements for the VM Host Server are the same as outlined in 2.1項 「ハードウェア要件」. However, additional RAM for each virtualized guest is needed. It should at least be the same amount that is needed for a physical installation. It is also strongly recommended to have at least one processor core or hyper-thread for each running guest.
AArch64 is a continuously evolving platform. It does not have a traditional standards and compliance certification program to enable interoperability with operating systems and hypervisors. Ask your vendor for the support statement on SUSE Linux Enterprise Server.
Running KVM or Xen hypervisors on the POWER platform is not supported.
7.1.2 Xen hardware requirements #
SUSE supports Xen on AMD64/Intel 64.
7.2 Hypervisor limits #
New features and virtualization limits for Xen and KVM are outlined in the Release Notes for each Service Pack (SP).
Only packages that are part of the official repositories for SUSE Linux Enterprise Server are
supported. Conversely, all optional subpackages and plug-ins (for QEMU,
libvirt) provided at
packagehub are
not supported.
For the maximum total virtual CPUs per host, see recommendations in the Virtualization Best Practices Guide regarding over-commitment of physical CPUs. The total number of virtual CPUs should be proportional to the number of available physical CPUs.
With SUSE Linux Enterprise Server 11 SP2, we removed virtualization host facilities from 32-bit editions. 32-bit guests are not affected and are fully supported using the provided 64-bit hypervisor.
7.2.1 KVM limits #
Supported (and tested) virtualization limits of a SUSE Linux Enterprise Server 15 SP4 host running Linux guests on AMD64/Intel 64. For other operating systems, refer to the specific vendor.
|
Maximum virtual CPUs per VM |
288 |
|
Maximum memory per VM |
6 TiB |
KVM host limits are identical to SUSE Linux Enterprise Server (see the corresponding section of release notes), except for:
Maximum virtual CPUs per VM: See recommendations in the Virtualization Best Practices Guide regarding over-commitment of physical CPUs at https://documentation.suse.com/sles-15/html/SLES-all/article-virtualization-best-practices.html#sec-vt-best-perf-cpu-assign. The total virtual CPUs should be proportional to the available physical CPUs.
7.2.2 Xen limits #
|
Maximum virtual CPUs per VM |
32 (general HVM recommendation), 64 (HVM Windows guest), 128 (trusted HVMs), or 512 (PV) |
|
Maximum memory per VM |
2 TiB (64-bit guest), 16 GiB (32-bit guest with PAE) |
|
Maximum total physical CPUs |
1024 |
|
Maximum total virtual CPUs per host |
See recommendations in the Virtualization Best Practices Guide regarding over-commitment of physical CPUs in https://documentation.suse.com/sles-15/html/SLES-all/article-virtualization-best-practices.html#sec-vt-best-perf-cpu-assign. The total virtual CPUs should be proportional to the available physical CPUs |
|
Maximum physical memory |
Recommendation is to stay below the 16 TiB address boundary. |
|
Suspend and hibernate modes |
Not supported. |
7.3 Supported host environments (hypervisors) #
This section describes the support status of SUSE Linux Enterprise Server 15 SP4 running as a guest operating system on top of various virtualization hosts (hypervisors).
|
SUSE Linux Enterprise Server |
Hypervisors |
|---|---|
|
SUSE Linux Enterprise Server 11 SP4 |
Xen and KVM |
|
SUSE Linux Enterprise Server 12 SP1 to SP5 |
Xen and KVM |
|
SUSE Linux Enterprise Server 15 GA to SP4 |
Xen and KVM |
You can also search in the SUSE YES certification database
Support for SUSE host operating systems is full L3 (both for the guest and host) in accordance with the respective product life cycle.
SUSE provides full L3 support for SUSE Linux Enterprise Server guests within third-party host environments.
Support for the host and cooperation with SUSE Linux Enterprise Server guests must be provided by the host system's vendor.
7.4 Supported guest operating systems #
This section lists the support status for various guest operating systems virtualized on top of SUSE Linux Enterprise Server 15 SP4 for KVM and Xen hypervisors.
Microsoft Windows guests can be rebooted by libvirt/virsh only if paravirtualized
drivers are installed in the guest. Refer to
https://www.suse.com/products/vmdriverpack/ for more
details on downloading and installing PV drivers.
SUSE Linux Enterprise Server 11 SP4
SUSE Linux Enterprise Server 12 SP3, 12 SP4, 12 SP5
SUSE Linux Enterprise Server 15 GA, 15 SP1, 15 SP2, 15 SP3, 15 SP4
Windows Server 2008 SP2+, 2008 R2 SP1+, 2012+, 2012 R2+, 2016, 2019, 2022
Oracle Linux 6, 7, 8 (KVM hypervisor only)
SLED 15 SP3
Refer to the SUSE Liberty Linux documentation at https://documentation.suse.com/liberty for the list of available combinations and supported releases. In other cases, they are supported on a limited basis (L2, fixes if reasonable).
Starting from RHEL 7.2, Red Hat removed Xen PV drivers.
Windows 8+, 8.1+, 10+
In other combinations, L2 support is provided but fixes are available only if feasible. SUSE fully supports the host OS (hypervisor). The guest OS issues need to be supported by the respective OS vendor. If an issue fix involves both the host and guest environments, the customer needs to approach both SUSE and the guest VM OS vendor.
All guest operating systems are supported both fully virtualized and paravirtualized. The exception is Windows systems, which are only supported fully virtualized (but they can use PV drivers: https://www.suse.com/products/vmdriverpack/), and OES operating systems, which are supported only paravirtualized.
All guest operating systems are supported both in 32-bit and 64-bit environments, unless stated otherwise.
7.4.1 Availability of paravirtualized drivers #
To improve the performance of the guest operating system, paravirtualized drivers are provided when available. Although they are not required, it is strongly recommended to use them.
Starting with SUSE Linux Enterprise Server 12 SP2, we switched to a PVops kernel. We are no longer using a dedicated kernel-xen package:
The kernel-default+kernel-xen on dom0 was replaced by the kernel-default package.
The kernel-xen package on PV domU was replaced by the kernel-default package.
The kernel-default+xen-kmp on HVM domU was replaced by kernel-default.
For SUSE Linux Enterprise Server 12 SP1 and older (down to 10 SP4), the paravirtualized drivers are included in a dedicated kernel-xen package.
The paravirtualized drivers are available as follows:
- SUSE Linux Enterprise Server 12 / 12 SP1 / 12 SP2
Included in kernel
- SUSE Linux Enterprise Server 11 / 11 SP1 / 11 SP2 / 11 SP3 / 11 SP4
Included in kernel
- SUSE Linux Enterprise Server 10 SP4
Included in kernel
- Red Hat
Available since Red Hat Enterprise Linux 5.4. Starting from Red Hat Enterprise Linux 7.2, Red Hat removed the PV drivers.
- Windows
SUSE has developed virtio-based drivers for Windows, which are available in the Virtual Machine Driver Pack (VMDP). For more information, see https://www.suse.com/products/vmdriverpack/.
7.5 Supported VM migration scenarios #
SUSE Linux Enterprise Server supports migrating a virtual machine from one physical host to another.
7.5.1 Offline migration scenarios #
SUSE supports offline migration, powering off a guest VM, then moving it to a host running a different SLE product, from SLE 12 to SLE 15 SPX. The following host operating system combinations are fully supported (L3) for migrating guests from one host to another:
| Target SLES host | 12 SP3 | 12 SP4 | 12 SP5 | 15 GA | 15 SP1 | 15 SP2 | 15 SP3 | 15 SP4 |
|---|---|---|---|---|---|---|---|---|
| Source SLES host | ||||||||
| 12 SP3 | ✓ | ✓ | ✓ | ✓ | ❌ | ❌ | ❌ | ❌ |
| 12 SP4 | ❌ | ✓ | ✓ | (✓) | ✓ | ❌ | ❌ | ❌ |
| 12 SP5 | ❌ | ❌ | ✓ | ❌ | ✓ | ✓ | ❌ | ❌ |
| 15 GA | ❌ | ❌ | ❌ | ✓ | ✓ | ✓ | ✓ | ❌ |
| 15 SP1 | ❌ | ❌ | ❌ | ❌ | ✓ | ✓ | ✓ | ❌ |
| 15 SP2 | ❌ | ❌ | ❌ | ❌ | ❌ | ✓ | ✓ | ✓ |
| 15 SP3 | ❌ | ❌ | ❌ | ❌ | ❌ | ❌ | ✓ | ✓ |
| ✓ |
Fully compatible and fully supported |
| (✓) |
Supported for KVM hypervisor only. |
| ❌ |
Not supported |
7.5.2 Live migration scenarios #
This section lists support status of various live migration scenarios when running virtualized on top of SLES. Also, refer to the supported live migration requirements. The following host operating system combinations are fully supported (L3 in accordance with the respective product life cycle).
SUSE always supports live migration of virtual machines between hosts running SLES with successive service pack numbers. For example, from SLES 15 SP2 to 15 SP3.
SUSE strives to support live migration of virtual machines from a host running a service pack under LTSS to a host running a newer service pack, within the same major version of SUSE Linux Enterprise Server. For example, virtual machine migration from a SLES 12 SP2 host to a SLES 12 SP5 host. SUSE only performs minimal testing of LTSS-to-newer migration scenarios and recommends thorough on-site testing before attempting to migrate critical virtual machines.
Live migration between SLE 11 and SLE 12 is not supported because of the different tool stack, see the Release notes for more details.
| Target SLES host | 12 SP4 | 12 SP5 | 15 GA | 15 SP1 | 15 SP2 | 15 SP3 | 15 SP4 |
|---|---|---|---|---|---|---|---|
| Source SLES host | |||||||
| 12 SP3 | ✓ | ❌ | ❌ | ❌ | ❌ | ❌ | ❌ |
| 12 SP4 | ✓ | ✓ | (✓) | ❌ | ❌ | ❌ | ❌ |
| 12 SP5 | ❌ | ✓ | ❌ | ✓ | ❌ | ❌ | ❌ |
| 15 GA | ❌ | ❌ | ✓ | ✓ | ❌ | ❌ | ❌ |
| 15 SP1 | ❌ | ❌ | ❌ | ✓ | ✓ | ❌ | ❌ |
| 15 SP2 | ❌ | ❌ | ❌ | ❌ | ✓ | ✓ | ❌ |
| 15 SP3 | ❌ | ❌ | ❌ | ❌ | ❌ | ✓ | ✓ |
| ✓ |
Fully compatible and fully supported |
| (✓) |
Supported for KVM hypervisor only. |
| ❌ |
Not supported |
7.6 Feature support #
7.6.1 Xen host (Dom0) #
Dom0) #| Features | Xen |
|---|---|
| Network and block device hotplugging | ✓ |
| Physical CPU hotplugging | ❌ |
| Virtual CPU hotplugging | ✓ |
| Virtual CPU pinning | ✓ |
| Virtual CPU capping | ✓ |
| Intel* VT-x2: FlexPriority, FlexMigrate (migration constraints apply to dissimilar CPU architectures) | ✓ |
| Intel* VT-d2 (DMA remapping with interrupt filtering and queued invalidation) | ✓ |
| AMD* IOMMU (I/O page table with guest-to-host physical address translation) | ✓ |
The addition or removal of physical CPUs at runtime is not supported. However, virtual CPUs can be added or removed for each VM Guest while offline.
7.6.2 Guest feature support #
For live migration, both source and target system architectures need to match; that is, the processors (AMD* or Intel*) must be the same. Unless CPU ID masking is used, such as with Intel FlexMigration, the target should feature the same processor revision or a more recent processor revision than the source. If VMs are moved among different systems, the same rules apply for each move. To avoid failing optimized code at runtime or application start-up, source and target CPUs need to expose the same processor extensions. Xen exposes the physical CPU extensions to the VMs transparently. To summarize, guests can be 32-bit or 64-bit, but the VHS must be identical.
Hotplugging of virtual network and virtual block devices, and resizing, shrinking, and restoring dynamic virtual memory are supported in Xen and KVM only if PV drivers are being used (VMDP).
For machines that support Intel FlexMigration, CPU-ID masking and faulting allow more flexibility in cross-CPU migration.
For KVM, a detailed description of supported limits, features,
recommended settings and scenarios, and other useful information is
maintained in kvm-supported.txt. This file is part of
the KVM package and can be found in
/usr/share/doc/packages/qemu-kvm.
| Features | Xen PV guest (DomU) | Xen FV guest | KVM FV guest |
|---|---|---|---|
| Virtual network and virtual block device hotplugging | ✓ | ✓ | ✓ |
| Virtual CPU hotplugging | ✓ | ❌ | ❌ |
| Virtual CPU over-commitment | ✓ | ✓ | ✓ |
| Dynamic virtual memory resize | ✓ | ✓ | ✓ |
| VM save and restore | ✓ | ✓ | ✓ |
| VM Live Migration | ✓ [1] | ✓ [1] | ✓ |
| VM snapshot | ✓ | ✓ | ✓ |
| Advanced debugging with GDBC | ✓ | ✓ | ✓ |
| Dom0 metrics visible to VM | ✓ | ✓ | ✓ |
| Memory ballooning | ✓ | ❌ | ❌ |
| PCI Pass-Through | ✓ [2] | ✓ | ✓ |
| AMD SEV | ❌ | ❌ | ✓ [3] |
| ✓ |
Fully compatible and fully supported |
| ❌ |
Not supported |
| [1] | See Section 11.7.1, “Migration requirements”. |
| [2] | NetWare guests are excluded. |
| [3] | See https://documentation.suse.com/sles/15-SP3/html/SLES-amd-sev/article-amd-sev.html |
7.7 Nested virtualization #
Nested virtualization allows you to run a virtual machine inside another VM while still using hardware acceleration from the host. It has very bad performance and adds more complexity while debugging. Nested virtualization is mostly used for testing purposes. In SUSE Linux Enterprise Server, nested virtualization is a Technology Preview. It is only provided for testing purposes and is not supported. Bugs can be reported but they will be treated with low priority. Any attempt to live-migrate or to save or restore VMs in the presence of nested virtualization is also explicitly unsupported.