Set Up the SUSE Manager for Retail Environment with dedicated network for terminal

To set up the SUSE Manager for Retail environment, you will need to have already installed and configured:

  • SUSE Manager for Retail Server

  • one or more SUSE Manager for Retail branch server containerized proxies

  • one additional salt client for network management

  • one or more POS images built

1. Assumptions

In this example we consider architecture with dedicated network for POS terminals where branch server provides retail services TFTP, PXE, HTTP and required network services DHCP and DNS is provided by additional salt client host.

For dedicated network we assume 192.168.86.0/24 network and eth1 as network interface.

We assume to have one containerized branch server running on registered containerized host with salt minion id branch1.mystore.com, which is equal to the branch server fully qualified domain name, and branch id B0001.

As a terminal we assume to have one terminal with hardware manufacturer TerminalOEM and model T1000.

For POS image we assume to have one with name POS_Image_JeOS7.

2. Create required system groups

Unlike when using provided tools, manually setting up formulas requires manual creation of needed system groups. Follow guide System Groups to create the system groups:

  • TERMINALS

  • HWType:TerminalOEM-T1000

  • B0001

First group is generic optional group for collecting all POS terminals. Second group is hardware type group for our POS terminal. Third group is mandatory branch group.

For more information about Saltboot groups, see Set Up the SUSE Manager for Retail Environment.

3. Configure dedicated network on container host

If dedicated network is not yet set up on the container host, use following command to create new network with static IP address.

nmcli connection add con-name "Terminal Network" \
  ipv4.addresses 192.168.86.1                    \
  ipv4.gateway 192.168.86.1                      \
  ipv4.dns 192.168.86.1                          \
  ipv4.dns-search branch1.mystore.com            \
  ipv4.method auto                               \
  ifname eth1 type ethernet

4. Assign and configure branch server formulas

We assign following formulas to the branch server:

  • Dhcpd

  • Bind

Procedure: Assign formulas to the branch server

  1. Select the Formulas tab for the system branch1.mystore.com

  2. You should see list of formulas in Configuration sub-tab

  3. In displayed list select Dhcpd

  4. In displayed list select Bind

  5. Save assigned formulas by clicking Save in top right corner

Procedure: Configure Dhcpd formula

  1. Select Dhcpd formula from branch server formula list

    • Set the Domain Name to the branch1.mystore.com

    • Set the Domain Name Server to the IP address of branch server 192.168.86.1)

    • Set the Listen Interfaces to the eth1, which is network interface of branch server connected to dedicated terminal network

  2. Navigate to the Network Configuration (subnet) section, and use these parameters for Network1:

    • In the Network IP field, enter the IP address of the terminal network 192.168.86.0.

    • In the Netmask field, enter the network mask of the terminal network 255.255.255.0.

    • In the Domain Name field, enter the domain name for the terminal network branch1.mystore.com).

  3. In the Dynamic IP Range section, use these parameters to configure the IP range to be served by the DHCP service:

    • In the first input box, set the lower bound of the IP range 192.168.86.10

    • In the second input box, set the upper bound of the IP range 192.168.86.250

  4. In the Broadcast Address field, enter the broadcast IP address for the terminal network 192.168.86.255

  5. In the Routers field, enter the IP address to be used as default route in the terminal network 192.168.86.1

  6. In the Next Server field, enter the IP address of the branch server for PXE booting 192.168.86.1

  7. Set the Filename to the /pxelinux.0

  8. Set the Filename Efi to the /grub/shim.efi

  9. Set the Filename Http to the http://192.168.86.1/saltboot/grub/shim.efi

  10. Save the formula

Procedure: Configuring Bind with reverse name resolution

  1. Select Bind formula from branch server formula list

  2. In the Config section, select Include Forwarders so DNS server can forward queries to next DNS server

  3. In the Options section clieck + to add an option

  4. Set the Option to empty-zones-enable

    • Set the Value to No

  5. In the Configured Zones section, use these parameters for Zone 1, which is our primary zone:

    • Set the Name to branch1.mystore.com

    • In the Type field, select master

  6. Click Add item to add a second zone, and set these parameters for Zone 2, which is used for reverse name resolution:

    • Set the Name to com.mystore.branch1

    • In the Type field, select master

  7. In the Available Zones section, use these parameters for Zone 1:

    • In the Name field, enter the domain name branch1.mystore.com

    • In the File field, type the name of your configuration file branch1.mystore.com.txt

  8. In the Start of Authority (SOA) section, use these parameters for Zone 1:

    • In the Nameserver (NS) field, use the FQDN of the branch server bs.branch1.mystore.com

    • In the Contact field, use the email address for the domain administrator

    • Keep all other fields as their default values

  9. In the Records section, in subsection A, use these parameters to set up an A record for Zone 1:

    • In the Hostname field, use the hostname of the branch server bs.branch1.mystore.com., notice trailing . which are required here

    • In the IP field, use the IP address of the branch server 192.168.86.1

  10. In the Records section, subsection NS, use these parameters to set up an NS record for Zone 1:

    • In the input box, use the branch server branch1.mystore.com.

  11. Set up Zone 2 using the same parameters as for Zone 1, but ensure you use the reverse details:

    • The same SOA section as Zone 1.

    • Empty A and CNAME records.

    • Additionally, configure in Zone 2:

      • Set Generate Reverse to the network IP address 192.168.86.0/24

      • Set For Zones to the domain name of your branch network branch1.mystore.com

  12. Click Save Formula to save your configuration.

Procedure: Apply Configured Services

  1. Apply the highstate.

  2. Reboot container host to switch to new snapshot.

5. Prepare Saltboot Group

We assign Saltboot Group formula to the branch group B0001 which was created before.

Procedure: Assign Saltboot Group formula to Branch Group

  1. Navigate to Systems  System Groups

  2. Select group B0001, which is our branch group

  3. Select the Formulas tab once in group details

  4. You should see list of formulas in Configuration sub-tab

  5. In displayed list select Saltboot Group

  6. Save assigned formulas by clicking Save in top right corner

Procedure: Configure Saltboot Group for Branch

  1. Select Saltboot Group formula from B0001 group formula list

  2. Check Containerized Proxy checkbox

  3. Set Image Download Server to bs.branch1.mystore.com

  4. Save the formula

Saltboot Group is a group formula to be assigned to the branch group.

Assigning Saltboot Group to the branch server directly will not have any effect.

6. Set Up POS Terminal Partitioning

Partitioning is specific to the hardware type and configured using Saltboot formula.

Procedure: Assign Saltboot formula to hardware type group

  1. Navigate to Systems  System Groups

  2. Select group HWType:TerminalOEM-T1000, which is our hardware type group

  3. Select the Formulas tab once in group details

  4. You should see list of formulas in Configuration sub-tab

  5. In displayed list select Saltboot

  6. Save assigned formulas by clicking Save in top right corner

Procedure: Configure Saltboot formula

  1. Select Saltboot formula from HWType:TerminalOEM-T1000 group formula list

  2. Set Disk Symbolic ID to Disk1

  3. Set Device Type to DISK

  4. Set Disk Device to *

  5. Set Partition table type to gpt

  6. Click + to add a partition

    • Set Partition Symbolic ID to p1

    • Set Partition Size (MiB) to 512

    • Set Device Mount Point to /boot/efi

    • Set Filesystem Format to vfat

    • Set Partition Flags to boot

  7. Click + to add a partition

    • Set Partition Symbolic ID to p2

    • Set Device Mount Point to /

    • Set OS Image to Deploy to POS_Image_JeOS7

  8. Save the formula

Terminal can now be started and will be automatically provisioned, pending salt key acceptance.